KENDALL KYLIE KKSOLR Bluetooth Wireless Earbuds User Guide
- June 6, 2024
- KENDALL KYLIE
Table of Contents
KENDALL + KYLIE
WIRELESS EARBUDS
ONLINE QUICK START GUIDE
NOTE: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses,
and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver. Connect the
equipment into an outlet on a circuit different from that to which the
receiver is connected.
Consulting the dealer or an experienced radio/TV technician for help changes
or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment. This
device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference
that may cause undesired operation.
This equipment complies with FCC RF radiation exposure limits set forth for an
uncontrolled environment. This device and its antenna must not be located or
operated in conjunction with any other antenna or transmitter.
Wireless Earbuds Quickstart Guide
A. Charging contact
B. Function button
C. Charging port
D. Charging indicator
Never miss a beat with your Wireless Earbuds! Use your new favorite accessory
for enhanced listening. Whether it be for music, phone calls, or podcasts,
Wireless Earbuds are great for those on the go with easy-to-use technology and
design. Simply follow the instructions below to get started!
Charging Specifications:
• Working time: 3 hours
• Charging time: 40-50 minutes
Quick Setup Instructions
POWER ON: Simply remove the earbuds from the charging case to power on each
earbud. When they are both on, the two earbuds will automatically pair to each
other within a couple of seconds.
POWER OFF: Insert buds in the charging case to shut down. You can also
manually press the button on the left bud for 3-5 seconds to shut down both
buds. The light will flash red to indicate powering off.
BLUETOOTH PAIRING: When pairing with a new device. take both earbuds out of
the case. They will both flash red and blue light and pair automatically to
each other. When they are paired to each other, the left earbud will flash
blue and the right earbud will continue to flash red and blue to indicate that
both earbuds are paired to each other and ready to pair with a device.
Make sure your Bluetooth settings are turned on. The earbuds will appear as
“iTouch Earbuds- in your device list. Select this to pair with your device.
HOW TO USE IT:
- Click: play/pause, answer/hang-up
- Double click: makes a most recent call
- Long press for 2 seconds: next song
- Long press for 5 seconds: power on/off
LED LIGHT INDICATOR
- Alternately flashing RED and BLUE: Pairing mode
- Flashing BLUE once every 5 seconds: Connected to device
- Flashing RED: Powering off
FCC Warning
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
NOTE 1: This equipment has been tested and found to comply with the limits for
a Class B digital device, pursuant to part 15 of the FCC Rules. These limits
are designed to provide reasonable protection against harmful interference in
a residential installation. This equipment generates uses and can radiate
radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more
of the following measures:
– Reorient or relocate the receiving antenna.
– Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
-Consult the dealer or an experienced radio/TV technician for help.
NOTE 2: Any changes or modifications to this unit not expressly approved by
the party responsible for compliance could void the user’s authority to
operate the equipment.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>