SAKOBS SB2133 SoundBar with Wireless Subwoofer User Manual
- June 6, 2024
- SAKOBS
Table of Contents
SAKOBS SB2133 SoundBar with Wireless Subwoofer
Pair up with the subwoofer Automatic pairing
Plug the soundbar and the subwoofer into the mains sockets and then press power button on the unit or remote control to switch the unit to ON mode. The subwoofer and soundbar will automatically pair.
- When the subwoofer is pairing with the main unit,the Pair Indicator will flash
- When the subwoofer is paired with the main unit, the Pair Indicator will light
NOTE:
- Do not press the button on the subwoofer except for manual
- If the automatic pairing fails, pair the subwoofer with the main unit
Manual pairing
If no audio from the wireless subwoofer can be heard, manually pair up the subwoofer.
- Unplug both units from the mains sockets again, then plug them in again after 3
-
Press and hold the button on the soundbar or on the remote control for 3 seconds.
-
The Pair indicator on the subwoofer will rapidly
- Then press power button on the unit or remote control to switch the unit
- The Pair indicator on the subwoofer will become solid when
- If the Pair indicator still keeps blinking, repeat step 1-3.
NOTE:
- The subwoofer should be within 6 m of the soundbar in an open area (the closer the better).
- Remove any objects between the subwoofer and the
- If the wireless connection fails again, check if there is a objects or strong interference (e.g. interference from an electronic device) around the Remove these objects or strong interferences and repeat the above procedures.
- If the main unit is not connected with the subwoofer and it is in ON mode, the unit’s POWER indicator will
Basic Operation
When you first connect the main unit to the mains socket, the main unit will be in STANDBY mode.
- Press the button on the unit or on the remote control to switch the unit
- Press the button again to switch the unit back to STANDBY
- Disconnect the mains plug from the mains socket if you want to switch the unit OFF
Auto Wake
- If a TV or an external device is connected (AUX I OPTICAL), the unit will switch on automatically when the TV or the external device is switched on.
How to Enable Auto Wake
- Short press the (SOURCE) button and + (VOL+) button on the unit to enable or disable Auto Wake
- Auto Wake On: white and green LED blink twice While in STANDBY mode, the RED LED is breathing.
- Auto Wake Off: white and red LED blink twice While in STANDBY mode, the LED is in solid red.
Automatic Power Off Function
The unit automatically turns to STANDBY mode after about 15 minutes if the TV or the external unit is disconnected, switched off.
- To switch the unit off completely, remove the mains plug from the mains
- Please turn the unit off completely to save energy when not in
Select Modes
Press the (SOURCE) button repeatedly on the unit or on the remote control to select the OPTICAL, BT(Bluetooth), AUX mode. The selected mode will show on the display.
Adjust the Bass Button
- Press BASS+/- button to increase or decrease the (bass+S I bass-5).
- After about 3 seconds, the unit will exit from bass/treble The display will show the current selected mode. You may now press the VOL+ I – buttons to adjust volume.
Adjust the Volume
- Press the + I – buttons on the unit or VOL+/VOL on the remote control to adjust the volume.
- If you wish to turn the sound off, press the (MUTE) button on the remote Press the (MUTE) button again or press the VOL+ I VOL- buttons to resume normal listening.
Select a Preset Sound Effect
- While playing, press the EQ button on the remote control to select desired preset equalizers: MUSIC, MOVIE,
OPTICAL/ARC/AUX Operation
- Ensure that the unit is connected to the TV or audio
- Press the button repeatedly on the unit or on the remote control to select the OPTICAL, BT, AUX
- Operate your audio device directly for playback
- Press the VOL+/- button to adjust the volume to your desired level.
Bluetooth Operation
Pair Bluetooth-enabled Devices
The first time you connect your bluetooth device to this player, you need to pair your device to this player.
Note:
- The operational range between this player and a Bluetooth device is approximately 26 feet (Bm) (without any object between the Bluetooth device and the unit).
- Before you connect a Bluetooth device to this unit, ensure you know the device’s
- Compatibility with all Bluetooth devices is not
- Any obstacle between this unit and a Bluetooth device can reduce the operational
- If the signal strength is weak, your Bluetooth receiver may disconnect, but it will re-enter pairing mode
- During ON mod e, press the-i> button repeatedly on the unit or the* ( BT) button on the remote control to select Bluetooth “NO BT” will show on the display if the unit is not paired to any Bluetooth device.
- Activate your Bluetooth device and select the search “SAKO BS 582133” will appear on your Bluetooth device list.
- If you cannot find the unit, press and hold the button on the remote control to be The display will show “PAIR” and you will hear 11 Pairing11 from the unit.
- Select “SAKOBS SB2133” in the pairing list. After successful pairing, you will hear 11 Paired11 from the unit, and the display panel shows “BT”.
- Play music from the connected Bluetooth
To disconnect the Bluetooth function, you can :
- Switch to another function on the
- Disable the function from your Bluetooth The Bluetooth device will be disconnected from the unit after the “Disconnected” voice prompt.
- Press and hold the button on the remote
Tips:
- Enter 11000011 for the password if necessary.
- If no other Bluetooth device pairs with this player within two minutes, the player will recover its previous connection
- The player will also be disconnected when your device is moved beyond the operational range
- If you want to reconnect your device to this player, place it within the operational range
- If the device is moved beyond the operational range, when it is brought back, please check if the device is still connected to the player
- If the connection is lost, follow the instructions above to pair your device to the player again
Listen to Music from Bluetooth Device
- If the connected Bluetooth device supports Advanced Audio Distribution Pro le (A2DP), you can listen to the music stored on the device through the
- If the device also supports Audio Video Remote Control Pro le (AVRCP), you can use the player’s remote control to play music stored on the
- Pair your device with the
- Play music via your device (if it supports A2DP).
- Use supplied remote control to control play (if it supports AVRCP).
- To pause/resume play, press the button on the remote control
- To skip to a track, press the buttons on the remote control
Troubleshooting
To keep the warranty valid, never try to repair the system yourself. If you encounter problems when using this unit, check the following points before requesting service.
No power
- Ensure that the AC cord of the unit is properly connected .
- Ensure that there is power at the AC outlet
- Press STANDBY button to turn the unit on
Remote control does not work
- Before you press any playback control button,
- Reduce the distance between the remote control and the
- Insert the battery with its polarities (+/-) aligned as
- Replace the
- Aim the remote control directly at the sensor on the front of the
No sound
- Increase the Press VOL+ on the remote control or on the soundbar.
- Press ( MUTE) on the remote control to ensure the soundbar is not
- Press source buttons to select a different input
- When using either of the Digital inputs, if there is no audio:
- Try setting the TV output to PCM or
- Connect directly to your Blu-ray/other source, some TVs do not pass through digital
- Your TV may be set to variable audio Confirm that the audio output setting is set to FIXED or STANDARD, not VARIABLE. Consult your TV’s user manual for more detailed information.
- If using Bluetooth, ensure that the volume on your source device is turned up and that the device is not
I can’t find the Bluetooth name of this unit on my Bluetooth device for Bluetooth pairing
- Ensure the Bluetooth function is activated on your Bluetooth device
- Ensure you have paired the unit with your Bluetooth device.
This is a 15 mins power off function, one of the ERPII standard requirement for saving power
- When the unit’s external input signal level is too low, the unit will be turned off automatically in 15 Please increase the volume level of your external device
The subwoofer is idle or the indicator of subwoofer do not light up.
- Please unplug power cord from the mains sockect, and plug it in again after 4 minutes to resent the subwoofer.
Specifications
| Model Name | SB2133 |
|---|
Soundbar
Power Supply| AC100-240V “‘ S0/60Hz 1SV/2A
Power Consumption| Max. 60W
Standby Power| SO.S W
Dimension (WxDxH)| 16.1 x 3.9 x2.8 inches (410 x 100 x 70mm )
Net weight| 3.1 lbs (1.4kg)
Audio input sensitivity| SOOmV
Frequency Response| 210Hz-20KHz
Wireless Specification
Bluetooth Version| V 5.0
Bluetooth Maximum power transmitted| 10dBm
Frequency bands| 2402-2480MHz
Subwoofer
Power Supply| AC100-240V “‘ 50/60Hz 20.5V/ 3A
Power Consumption| Max.GO W
Standby Power| SO.S W
Dimension (WxHxD)| 15.7 x 4.6 x 9.4inches (400 x 116 x 240mm)
Net weight| 7.99 lbs (3.6kg)
Frequency Response| 40Hz -90Hz
Amplifier (Outputpower)
Sound bar| 56W, Test Mode@THD=1%
Subwoofer| GOW, Test Mode@THD=1%
Total| 116W
Remote Control
Distanee/Angle| Gm I 30 °
Battery type| AAA (1.SV X 2)
NOTE:
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more
of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help
Changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference
that may cause undesired operation.
Responsible Party:
Company name: YICHENG LIMITED
Address: 18121 E HAMPDEN AVE
UN IT C–661 AU RORA, CO 80013
Tel: 1-800-829-4933
E-mail: marketing@sakobs.com
UK Authorized Representative Company name: E2UK LONDON LTD Address: 13 Quad
Road , East Lane Business Park,Wembley HA9 7NE Email:
e2ukltd@gmail.com
Tel: +44 7429848355
Manufacturer:
Shenzhen Yicheng Technology Co., Ltd Room 406, Floor 4, No.9, Zone 2, Fuhai
Industrial Zone, Fuyong Community, Fuyong Street,
Baoan District, Shenzhen
- US: service@sakobs.cc
- EU: deservice@sakobs.cc
- JP: jpservice@sakobs.cc