MouKey M51-1 Multifunctional Bluetooth 5.1 Speaker User Manual
- June 6, 2024
- MouKey
Table of Contents
M51-1
Multifunctional Bluetooth 5.1 Speaker
User Manual
Welcome to Monkey
We are very grateful to have you purchasing our product.
Please take a few minutes to read the instructions for operating this product,
which will show you how to use it and explain the function and operation of
the device, ensuring a trouble-free installation.
Please keep these operating instructions properly for reference in the future.
WARNING
SHOCK HAZARD. DO NOT OPEN.
WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS
EQUIPMENT TO RAIN OR MOISTURE.
TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK, AND ANNOYING INTERFERENCE, PLEASE
USE ONLY THE RECOMMENDED ACCESSORIES FOR THE UNINTERRUPTED SERVICE OF THIS
DEVICE!
*DESIGN AND SPECIFICATIONS MAY CHANGE WITHOUT NOTICE
Functions of Buttons on the Control Panel
-
Standby switch: press this button for a few seconds to turn the machine on or off.
-
Button of switching 2.1/5.1: 2.1/5.1 mode switching.
-
Bluetooth function button: quick selection of Bluetooth function.
-
Mode button: short press to switch mode (sequence: BT→AUX→Optical→Coaxial→HD ARC.) 5. Last
song button: short press for the last song/long press for volume down. -
Next song button: short press for the next song/long press for volume up.
-
Play/pause button: short press to play/pause, long press to disconnect the Bluetooth in Bluetooth mode.
PS:
- At the volume + and-(independent control of the host and audio source input)
- Previous song and next song (only applicable to Bluetooth mode)
Display Status
Volume status: mute—-minimum volume—-maximum volume
Function Display
Connection Mode
- Bluetooth Connection
Functions of the remote control
- At the volume+and-(independent control of the host and audio source input)
- Previous song and next song (only applicable to Bluetooth mode)
Remote control operation
- The remote control should be operated within 6 meters and 30° range in front of the receiver.
- Make sure there is no major obstacle between the remote control and the machine.
- The remote control should be kept away from light, for high-intensity light will affect its performance.
-
Power button
Press this button to turn on the speaker or turn it to the standby mode. -
Mute button
Press this button in any signal mode, the machine mutes or unmutes. -
AUX button
Press the “AUX” button to select “Line In Mode” for audio input “AUX” shows on the display. -
CD/DVD button
Press this button to switch between CD and DVD audio. -
HDMI (ARC)
Press this button to quickly switch to the HD ARC function. -
+ button
Press this button to increase the volume.
The display shows the volume increasing value, 32 at maximum. -
– button
Press this button to lower the volume.
The display shows the volume lowering value, 0 at minimum. -
Previous track button
In BT mode, press this button to select the previous track. -
Next track button
In BT mode, press this button to select the next track. -
Play/pause button
When playing music in BT mode, press this button once to pause, and then press again to resume. -
CO button
Press the “CO” button to select the coaxial input mode for audio input “cox” shows on the display. -
SPDIF button
Press the “SPDIF” button to select the optical input mode for audio input “opt” shows on the display. -
BT button
Press the “BT” button and select Bluetooth mode for audio input.
The display shows “bt”. -
2.1 button
Press this button to quickly switch to 2.1-channel, normal disc and CD supports this channel. -
5.1 button
Press this button to quickly switch to 5.1-channel, if your sound source is not real 5.1, it will provide you with an analog state.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
There is noise
It is normal for a speaker to have white noise. If there is a “squeaking”
sound, it is caused by the input cable being not securely inserted or your
signal source. Please replace the cable or signal source and test it again.
No output of 5.1-channel
In Blu-ray or normal DVD state, there is only stereo sound. It requires HD
ARC, optical, or 5.1 DVD to achieve the play of 5.1-channel. Please check if
your disc or machine supports 5.1-channel.
HD is not available
Our device supports the HD ARC function, please check if your cable or output
terminal is ordinary HD1.4, 2.0, 2.1, the above three modes may not be
compatible.
Feature
- 5.1-channel Hi-Fi surround sound system, which can effectively present real music, super bass can provide you with a shocking sound field effect.
- Abundant audio input interfaces can meet the connections of devices such as TV, WIFI smart box, phone, and computer.
- Built-in wireless blue receiver function for wireless music streaming.
- Support HD ARC high-definition digital audio input.
- Support optical/coaxial digital audio to ensure better sound quality.
- DVD/CD/AUX(L/R) audio input.
- Built-in powerful DSP sound system
- Simple control center.
- Button functional CPU management for the operations of remote sensors.
- High-performance LED display that can show all functions.
“This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
- this device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation