Moukey Audio Amplifier 2 Channel Bluetooth 5.0, 200W Mini Amplifier Receiver for Speakers-Complete Features/Instruction Guide

Moukey Audio Amplifier 2 Channel Bluetooth 5.0, 200W Mini Amplifier

Receiver for Speakers

Specifications

• Package Dimensions
  11.22 x 8.39 x 3.82 inches

• Item Weight
  2.64 pounds

• Number of Channels
  2

• DC Input
  22V/4A

• Terminating Impedance
  4 Ohm – 16Ohm

• THD
  ≤ 0.03%

• Frequency Range
  20Hz – 20kHz (±1 dB)

• SNR
  ≥ 98dB

• Channel
  2.0 CH

• Brand
  Mounkey Audio

Introduction

Although it is little and beautiful, its power amplifier can drive speakers that are 3-6.5 inches in diameter with a peak output of 100W. Additionally, there are features like USB and SD card reading, one-key FM search, wireless audio connection, and other features. You can enjoy karaoke as much as you like because there are 2 microphone ports available.  Two RCA audio inputs are available for a tuner, CD player, tape drive, two 2.5-inch (6.3 cm) microphone inputs, an SD card slot, an FM radio antenna, and other external signal sources are supported by this digital amplifier box. Has two pairs of speakers and RCA audio output. You can take pleasure in karaoke as much as you like. Safety and stability Optimised circuit design can protect matched speakers and reduce product life and stability. Best for your home’s bookshelves, PCs, desktops, and speakers. Run 4 ohm to 16-ohm speakers (only for passive speakers, not support active speakers.)  The sound mixer has a Bluetooth audio streaming feature with a minimum wireless range of 40 feet (12 meters). It is simple to link with the receiver while using the newest technology available today, including computers, iPods, iPhones, and smartphones.

What’s In the Box?

• 1 x Moukey MAMP3
• 1 x Remote control
• 1 x Adapter
• 1 x Manual

STRONG FOR HOME AUDIO

The dual-pass Bluetooth stereo amplifier receiver is ideal for your acoustic sound system, home cinema, and karaoke. With 100 Watts of peak power, you can comfortably accommodate 1 set of speakers and experience the audio impact of high-quality audio amplification, which is typically suitable for home audio needs.

REMOTE CONTROL

This amplifier makes it easy for you to remotely control the device from any angle and free yourself from the restrictions of wires thanks to a small remote control. (NOTE: To enable the remote to function after receiving, please remove the battery insulating layer.)

The following techniques can be used to fix the Bluetooth connection if the BT indicator lights up but it is unreliable.

1. Make that the signal is not being blocked by any objects, particularly metals;
2. Disconnect and clear the Bluetooth transmitting device’s connection before attempting to reconnect, then turn off the power amplifier;
3. Note
    If this occurs initially, contact us and provide additional information, such as the model of your phone, video, etc.

Can Bluetooth be used to connect two devices

No, connecting two at the same time will interfere with the audio stream. It can only be unplugged, then reconnected to other electronics.

Connecting a Bluetooth speaker

The Bluetooth speaker already contains a small power amplifier, which could lead to burn-in after being amplified by other power amplifiers. The Bluetooth speaker is a Bluetooth receiver, which is the same as the Bluetooth function of the power amplifier.

Frequently Asked Questions

• Does it work well with speakers that have an RMS of up to 40 watts each speaker? i have the klipsch r-1800-c speakers?
  I just got this to hook to 2 150w sony center speakers I have and it doesn’t drive them a third as hard as my receiver that is only 80w peak per channel, it would probably work better with your 40w speakers than mine, just don’t crank them up so high the start to distort. It’s better for speakers to have a higher-powered amp because a small amp struggling will clip and damage the speaker. This amp says it is only a 200w peak on the back and I doubt it’s actually half that with normal music, maybe if it charged up fully and had one quick release it could reach 200, but the advertised 500w is total VS! The only way it could hurt my 300w max speakers is from its highly filthy distortion at high levels.

• Does this come with a power cord? If not, what cord do I need?
  It comes with an AC adapter power brick. Kind of large – almost as big as the amp itself. But nice long cords so it’s easy to stow the brick out of the way.

• I have this receiver hooked up to my speakers across the room from my stereo system, what would ve the best Bluetooth transmitter to pair with this re
  Dear customer, please use speaker cables to connect our power amplifier with passive speakers. If your speaker is active, you need to output from the headphone output port of the power amplifier to the speaker input port. There is no Bluetooth receiver-transmitter to connect them.

• What is the rms rating for each channel?
  RMS 100 rating for each channel.

• Does this can replace a receiver, or is this just an amp? What is the difference?
  I am glad to answer your question. I bought two devices, one is Donner Bluetooth 5.0 Stereo Audio Amplifier Receiver MAMP5. The other is this Class D Home Amp MAMP4. Thi one is more compact and exquisite, and its sound quality is better, I have no doubt that it has RMS 100 watts. I found that this device is no different except for the lack of an FM/MIC interface. Even this one can be plugged into headphones. It helps me very well when I don’t want to put music outside. Hope it will be useful to you too.

• Does it work for speakers and a subwoofer?
  It could be used with passive speakers within 4-16 ohm, 50W, but only two speakers can be used at most. And it cannot be used with a subwoofer.

• Is this bridgeable? I don’t want to split the left and right channels I will be using this for a whole-home stereo system?
  Yes, I bridged mine together for a jukebox and it works wonderfully.

• Will this work with a pre-amp turntable?
  Yes. That’s exactly how I use it – I just plug the turntable (which has its own built-in pre-amp) directly into this gadget and plug my speakers and headphones into this amp. Works great and I’ve been very satisfied with the audio. The fact that this model has a little bit of bass and treble adjustment is a big plus.

• Can this power two speakers that each have up 40 watts RMS (160 watts peak)?
  Yes, it can power two speakers that each has up 40 watts of RMS.

• Does the amp automatically turn on when you connect your device or do you have to use the remote to turn it on every time you use it?
  They will connect automatically.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>