SUNITEC BC980SA Hands Free Bluetooth for Cell Phone Car Kit User Manual
- June 6, 2024
- SUNITEC
Table of Contents
- ACCESSORIES
- OVERVIEW
- WHAT YOUR SUNITEC PREMIUM BC980SA CAN DO
- USING YOUR SUNITEC PREMIUM BC980SA
- USING THE SUNTEC PREMIUM BC980SA WITH YOUR MOBILE PHONE
- WHAT THE LIGHTS MEAN
- SUPPORT FAQ
- TECHNICAL SPECIFICATIONS
- DECLARATION of CONFORMITY
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
BC980SA Hands-Free Bluetooth for Cell Phone Car Kit
User Manual
ACCESSORIES
OVERVIEW
WHAT YOUR SUNITEC PREMIUM BC980SA CAN DO
- Answer, end, and reject calls.
- Deliver great sound and noise cancellation with the HD voice microphone.
- Redial last number.
- Connect to two mobile phones.
- Voice Dialing to allow easy call interaction while driving (by activating Siri, Google Assistant, or other voice control software to answer an incoming call).
- Play music and GPS via your connected mobile device.
- Turns on/off automatically.
Noted: you will hear the Voice guidance of Power On, Power Off, Pairing, Connected, Disconnected, and Battery low for related operating.
USING YOUR SUNITEC PREMIUM BC980SA
-
TURNING ON THE SUNITEC PREMIUM BC980SA
Slide the on/off button to turn the UNITEC PREMIUM BC980SA on or off. -
FIRST TIME PAIRING WITH YOUR DEVICE
First make sure SUNITEC PREMIUM BC980SA was slid ON, LED indicator will guide you through pairing with your mobile phone.
1. Press and hold the Multi-function button for 3 seconds until the LED indicator flashes a blue and red alternative(entering pairing mode).
2. On your mobile device, turn on the Bluetooth feature.
Tip: The Bluetooth feature is usually found in the Settings menu.
3. Select your BC980SA from the device list. Once paired, the LED indicator glows blue and Flashing Blue once every 10 seconds.
NOTE: After the UNITEC PREMIUM BC980SA and a mobile phone have been paired they will automatically connect whenever the UNITEC PREMIUM BC98 0SA is switched on and the mobile phone has Bluetooth activated and is within range.
-
Positioning the SUNITEC PREMIUM BC980SA
Clip the SUNITEC PREMIUM BC980SA to the sun visor in your vehicle.
-
Charging YOUR SUNITEC PREMIUM BC980SA
1. In-car charging
Connect the USB cable with car charger attachment to the SUNITEC PREMIUM BC980SA and the car lighter socket in your vehicle.
2. PC charging
Connect the SUNITEC PREMIUM BC980SA to any available USB slot on your PC, using the USB cable.
USING THE SUNTEC PREMIUM BC980SA WITH YOUR MOBILE PHONE
Button| Function|
Operation
---|---|---
Multi-function button| Answer a call| Tap the c once
Reject a call| Double-Tap the
End a call| Tap the once
Redial last number| Double-tap the
Activate Siri / other voice control software| Tap the once
/
| Speaker volume up/down| Press and hold the or
Skip forward| Tap the
Skip backward| Tap the
+| Transfer call from SUNITEC BC980SA to mobile phone| Press and together
WHAT THE LIGHTS MEAN
What you see | What It means |
---|---|
Steady Blue on 3 seconds | Power on |
Steady Red on 1 second | Power off |
Flashing Blue twice every 10 seconds | The SUNITEC PREMIUM BC980SA is powered |
on, but not connected to a mobile phone (standby mode)
Flashing Blue and Red| The SUNITEC PREMIUM BC980SA is in pairing mode, and
ready to connect
Flashing Blue once every 10 seconds| A mobile phone Sr Bluetooth connected to
the SUNITEC PREMIUM BC980SA
Flashing Blue once every 6 seconds| Music streaming
Steady red| Battery is charging
Green off| Battery is fully charged
Flashing Red every 5 seconds| Low battery
SUPPORT FAQ
Q: I hear crackling noises
A: Bluetooth is a radio technology that is sensitive to objects between
the SUNITEC PREMIUM BC980SA and the connected device. Ensure the SUNITEC
PREMIUM BC980SA and the connected device are within 33 feet (10 meters) of
each other, with no major objects in the way (walls, etc.).
Q: I cannot hear anything
A: – Increase the speaker volume.
- Ensure the SUNITEC PREMIUM BC980SA is paired to a device that is playing.
- Make sure your phone is connected to the SUNITEC PREMIUM BC980SA by pressing and holding the Multi-function button.
Q: I am having pairing problems
A: You may have deleted the SUNITEC PREMIUM BC980SA pairing connection in
your mobile phone. Follow the pairing instructions.
Q: Will the SUNITEC PREMIUM BC980SA work with other Bluetooth equipment?
A: The SUNITEC PREMIUM BC980SA is designed to work with Bluetooth mobile
phones. It can also support other Bluetooth devices that are compliant with
Bluetooth version 1.1 or higher and support a headset, hands-free, and/or
advanced audio distribution profile.
Q: I cannot use Reject call, call on hold, Redial, or voice dialing?
A: These features require your mobile phone to support a hands-free
profile. Refer to your mobile phone user manual for more details.
Q: My voice commands do not work?
A: This feature requires your mobile phone to support voice commands
such as Siri, Google assistant or other voice control software. Refer to
your mobile phone user manual for more Details.
Q: I want to reset the pairing list on my speakerphone?
A: – The speakerphone registers a list of up to 8 mobile phones. To clear
the pairing list and reset the SUNITEC PREMIUM BC980SA to factory settings you
can turn the SUNITEC PREMIUM BC980SA on while pressing and for about 10
seconds.
- When you see the LED indicator flashing blue and red, release the buttons.
- The time you power on the SUNITEC PREMIUM BC980SA it will automatically go into pairing mode.
Q: I want to cancel Auto Power On function?
A: – MANUALLY disable this feature by turning off the speakerphone.
Slide the on/off button to turn the SUNITEC PREMIUM BC980SA of f.
Q: Pairing With Two Mobile Phones?
A:
-
Slide on the SUNITEC PREMIUM BC980SA. Pair and connect BC980SA with the FIRST phone as per the above pairing instructions.
-
Slide off the SUNITEC BC980SA and deactivate the Bluetooth on the first phone.
-
Slide on the SUNITEC PREMIUM BC980SA again. Pair and connect BC980SA with the SECOND phone as per the above pairing instructions.
-
Slide off the SUNITEC BC980SA and activate the Bluetooth on both phones.
-
Slide on the SUNITEC BC980SA, connected with both phones.
TECHNICAL SPECIFICATIONS
-
Speaker: 2 watt
-
Operating range: Up to 10 meters (33 feet)
-
Operating frequency band: 2.4GHz~2.48GHz unlicensed LSM band
-
Bluetooth version: 5.0
-
Paired devices: Up to 8 paired devices.
Two active devices connected simultaneously -
Supported Bluetooth profiles: Hands-Free profile, Headset profile,
A2DP Profile(GPS instruction announcement and music) -
Digital signal processing (DSP): Up to 21 dB noise reduction on transmit signal. Acoustic echo cancellation
-
Talk time: Up to 20 hours
-
Standby time: Up to 1000 hours
-
Charging time: Approximately 3 hours
-
Battery: Internal rechargeable 650mA Li-Polymer battery
-
Charger Voltage: DC5.0V, 500mA
Note: The talk and standby time may vary when using different phones or other compatible Bluetooth devices, usage setting usage style, and environments.
DECLARATION of CONFORMITY
The company Sunitec Electronics Limited, declares that product BC980SA
complies with the essential requirement of the 2014/53/EU.
The declaration of conformity incomplete form is available at the headquarters
of Suntec Electronics Limited.
Product sold in the US and Product sold in the European community Manufactured
by Sunitec Electronics Limited. MADE IN CHINA
For FAQs and more information, please visit :
Web: www.sunitec.net
+86-755-36863386 / 36863387 / 36863389
SUNITEC PREMIUM CAR KIT
MODEL: BC980SA
FCC Caution.
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions:
- This device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation.
Any changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more
of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>