SUNITEC BC920SA Bluetooth Hands Free Car Kit User Manual

June 6, 2024
SUNITEC

BC920SA Bluetooth Hands-Free Car Kit
User ManualSUNITEC BC920SA Bluetooth Hands Free Car
Kit

ACCESSORIES

SUNITEC BC920SA Bluetooth Hands Free Car Kit - figure
1

OVERVIEW

SUNITEC BC920SA Bluetooth Hands Free Car Kit - figure
2

WHAT YOUR SUNITEC PREMIUM BC920SA CAN DO

  • Answer, end, and reject calls.

  • Deliver great sound and noise cancellation with the HD voice microphone.

  • Redial last number.

  • Connect to two mobile phones.
    Voice Dialing to allow easy call interaction while driving (by activating Siri, Google Assistant or other voice control software to answer an incoming call).

  • Play music and GPS via your connected mobile device.

  • Turns on/off automatically.

Noted: you will hear the Voice Guidance of Power On, Power Off, Pairing, Connected, Disconnected and Battery low for related operating.

USING YOUR SUNITEC PREMIUM BC920SA

  1. TURNING ON THE SUNITEC PREMIUM BC920SA
    Slide the on/off button to turn the SUNITEC PREMIUM BC920SA on or off.
    SUNITEC BC920SA Bluetooth Hands Free Car Kit - figure
3

  2. FIRST TIME PAIRING WITH YOUR DEVICE
    The first time the SUNITEC PREMIUM BC920SA is turned on, the LED indicator will guide you through pairing with your mobile phone.
    1. Press and hold the Multi-function button for 10 seconds until the LED indicator flashes blue and red(entering pairing mode).
    2. On your mobile device, turn on the Bluetooth® feature.
    Tip: The Bluetooth feature is usually found in the Settings menu.
    3. Select your BC920SA from the device list. Once paired, the LED indicator glows blue and Flashing Blue once every 10 seconds.
    SUNITEC BC920SA Bluetooth Hands Free Car Kit - figure
4

  3. Positioning the SUNITEC PREMIUM BC920SA
    Clip the SUNITEC PREMIUM BC920SA to the sun visor in your vehicle.

  4. Charging YOUR SUNITEC PREMIUM BC920SA
    1. In-car charging
    Connect the USB cable with car charger attachment to the SUNITEC PREMIUM BC920SA and the car lighter socket in your vehicle.
    SUNITEC BC920SA Bluetooth Hands Free Car Kit - figure
62. PC charging
    Connect the SUNITEC PREMIUM BC920SA to any available USB slot on your PC, using the USB cable.
    SUNITEC BC920SA Bluetooth Hands Free Car Kit - figure
7

USING THE SUNITEC PREMIUM BC920SA WITH YOUR MOBILE PHONE

Button| Function|

Operation

---|---|---
Multi-function button| Answer a call| Tap the c once
Reject a call| Double-Tap the
End a call| Tap the once
Redial last number| Double-tap the
Activate Siri / other voice control software| Tap the once

| Speaker volume up/down| Press and hold the or
Skip forward| Tap the
Skip backward| Tap the
| Transfer call from SUNITEC  BC980SA to mobile phone| Press and together

WHAT THE LIGHTS MEAN

What you see What It means
Steady Blue on 3 seconds Power on
Steady Red on 1 second Power off
Flashing Blue twice every 10 seconds The SUNITEC PREMIUM BC980SA is powered

on, but not connected to a mobile phone (standby mode)
Flashing Blue and Red| The SUNITEC PREMIUM BC980SA is in pairing mode, and ready to connect
Flashing Blue once every 10 seconds| A mobile phone Sr Bluetooth connected to the SUNITEC PREMIUM BC980SA
Flashing Blue once every 6 seconds| Music streaming
Steady red| Battery is charging
Green off| Battery is fully charged
Flashing Red every 5 seconds| Low battery

SUPPORT FAQ

Q: I hear crackling noises
A: Bluetooth is a radio technology that is sensitive to objects between the SUNITEC PREMIUM BC980SA and the connected device. Ensure the SUNITEC PREMIUM  BC980SA and the connected device are within 33 feet (10 meters) of each other, with no major objects in the way (walls, etc.).

Q: I cannot hear anything
A: – Increase the speaker volume.

  • Ensure the SUNITEC PREMIUM BC980SA is paired to a device that is playing.
  • Make sure your phone is connected to the SUNITEC PREMIUM BC980SA by pressing and holding the Multi-function button.

Q: I am having pairing problems
A: You may have deleted the SUNITEC PREMIUM BC980SA pairing connection in your mobile phone. Follow the pairing instructions.

Q: Will the SUNITEC PREMIUM BC980SA work with other Bluetooth equipment?
A: The SUNITEC PREMIUM BC980SA is designed to work with Bluetooth mobile phones. It can also support other Bluetooth devices that are compliant with Bluetooth version 1.1 or higher and support a headset, hands-free, and/or advanced audio distribution profile.

Q: I cannot use Reject call, call on hold, Redial, or voice dialing?
A: These features require your mobile phone to support a hands-free profile. Refer to your mobile phone user manual for more details.

Q: My voice commands do not work?
A: This feature requires your mobile phone to support voice commands such as Siri, Google assistant or other voice control software. Refer to your mobile phone user manual for more Details.

Q: I want to reset the pairing list on my speakerphone?
A: – The speakerphone registers a list of up to 8 mobile phones. To clear the pairing list and reset the SUNITEC PREMIUM BC980SA to factory settings you can turn the  SUNITEC PREMIUM BC980SA on while pressing and for about 10 seconds.

  • When you see the LED indicator flashing blue and red, release the buttons.
  • The time you power on the SUNITEC PREMIUM BC980SA it will automatically go into pairing mode.

Q: I want to cancel Auto Power On function?
A: – MANUALLY disable this feature by turning off the speakerphone.
Slide the on/off button to turn the SUNITEC PREMIUM BC980SA of f.

Q: Pairing With Two Mobile Phones?
A:

  1. Slide on the SUNITEC PREMIUM BC980SA. Pair and connect BC980SA with the FIRST phone as per the above pairing instructions.

  2. Slide off the SUNITEC BC980SA and deactivate the Bluetooth on the first phone.

  3. Slide on the SUNITEC PREMIUM BC980SA again. Pair and connect BC980SA with the SECOND phone as per the above pairing instructions.

  4. Slide off the SUNITEC BC980SA and activate the Bluetooth on both phones.

  5. Slide on the SUNITEC BC980SA, connected with both phones.

TECHNICAL SPECIFICATIONS

  • Speaker: 2 watt

  • Operating range: Up to 10 meters (33 feet)

  • Operating frequency band: 2.4GHz~2.48GHz unlicensed LSM band

  • Bluetooth version: 5.0

  • Paired devices: Up to 8 paired devices.
    Two active devices connected simultaneously

  • Supported Bluetooth profiles: Hands-Free profile, Headset profile,
    A2DP Profile(GPS instruction announcement and music)

  • Digital signal processing (DSP): Up to 21 dB noise reduction on transmit signal. Acoustic echo cancellation

  • Talk time: Up to 20 hours

  • Standby time: Up to 1000 hours

  • Charging time: Approximately 3 hours

  • Battery: Internal rechargeable 650mA Li-Polymer battery

  • Charger Voltage: DC5.0V, 500mA

Note: The talk and standby time may vary when using different phones or other compatible Bluetooth devices, usage setting usage style, and environments.

DECLARATION of CONFORMITY

The company Sunitec Electronics Limited, declares that product BC980SA complies with the essential requirement of the 2014/53/EU.
The declaration of conformity incomplete form is available at the headquarters of Suntec Electronics Limited.
Product sold in the US and Product sold in the European community Manufactured by Sunitec Electronics Limited. MADE IN CHINA

For FAQs and more information, please visit :

https://www.sunitec.net/en/

Web: www.sunitec.net

suppport@sunitec.net

+86-755-36863386 / 36863387 / 36863389

SUNITEC PREMIUM CAR KIT
MODEL: BC980SA

FCC Caution.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

  1. This device may not cause harmful interference, and
  2. this device must accept any interference received, including interference that may cause undesired operation.

Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the  user is encouraged to try to correct the interference by one or more of the following measures:

  • Reorient or relocate the receiving antenna.
  • Increase the separation between the equipment and receiver.
  • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
  • Consult the dealer or an experienced radio/TV technician for help.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals