BiDaE LB60004G Beacon User Manual
- June 6, 2024
- BiDaE
Table of Contents
LB60004G
Beacon
User Manual
Product Information
Exterior
Description
| RESET | When LB60004G works abnormally, press the Reset button to restart. |
|---|---|
| power | 5 V,2.5A for full power delivery to USB devices |
| Ethernet port | Ethernet ports for connecting the LB60004G to the local |
computers
Network Setup
Connection with LB60004G
Wireless connected by LBeacon default AP SSID: BiDaE_AP
Or connected by Ethernet cable
Set up
Setup Using Browser
Enter IP(default IP:192.168.2.1) in the address bar and login Username: root,
No password
Network Setup
Connection to Wi-Fi
Go to Web Setting >Network> Wireless>Scan>Join
Network>Enter“passphrase”>save>submit>save>Save & Apply
Network Setup
Setting Static IP
Go to Web Setting >Network> Wireless>WWAN>Edit Select “Static address”>enter
the“IPv4”>save>Save & Apply
Setting Access Point
- Setting Wireless Access Point
Go to Web Setting >Network>wireless> Edit>change “ssid”>change “key”>save>Save & Apply
-
Setting LAN static IP
Go to Web Setting >Network> Interfaces LAN>Edit> enter the “IPv4”>save>Save & Apply
-
Turn off LBeacon AP
Go to Web Setting >Network> Wireless>Disable> Save & Apply
BiDaE Technology, Incorporated
Address:1F., No. 5, Ln. 96, Sec. 1, Da’an Rd., Da’an Dist.,
Taipei City 106069, Taiwan (R.O.C.)
Email:sales@bidae.tech
http://www.bidae.tech
Regulatory Compliance Statements
FCC Warning Statement
This device has been tested and found to comply with the limits for a Class B
digital device, pursuant to part 15 of the FCC rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses, and can radiate
radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference with radio communications.
However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference
with radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to
- Connect the equipment into an outlet on a circuit different from that to
- Consult the dealer or an experienced radio/TV technician for help.
This transmitter must not be co‐located or operating in conjunction with any
other antenna or transmitter.
This device complies with FCC RF radiation exposure limits set forth for an
uncontrolled environment. To maintain compliance with FCC RF exposure
requirements, avoid direct contact to the transmitting antenna during
transmitting.
Any changes or modifications (including the antennas) made to this device that
is not expressly approved by the manufacturer may void the user’s authority to
operate the equipment.
FCC Label Statement
This device complies with part 15 of the FCC rules. Operation is subject to
the following two conditions:
- This device may not cause harmful interference.
- This device must accept any interference received, including interference that may cause undesired operation.
RF exposure warning
This equipment must be installed and operated in accordance with provided
instructions and the antenna(s) used for this transmitter must be installed to
provide a separation distance of at least 20 cm from all persons and must not
be co‐located or operating in conjunction with any other antenna or
transmitter. End‐users and installers must be provided with antenna
installation instructions and transmitter operating conditions for satisfying
RF exposure compliance.
European Conformity Statement
BiDaE Technology declares that the product is in compliance with the essential
requirements and all other provisions of the
RED 2014/53/EU directive.
CE Mark Warning
| AT| BE| BG| HR| CY| CZ| DK
---|---|---|---|---|---|---|---
EE| Fl| FR| DE| EL| HU| IE
IT| LV| LT| LU| MT| NL| PL
PT| RO| SK| SI| ES| SE| UK
IS| _ LI| NO| CH| TR| |
RoHS Statement
This device conforms to RoHS (Restriction Of Hazardous Substances) European
Union regulations that set maximum concentration limits on hazardous materials
used in electrical and electronic equipment.