SUPERSONIC SC1075ER FM Band Receiver User Manual
- June 6, 2024
- Supersonic
Table of Contents
SUPERSONIC SC1075ER FM Band Receiver
Parts Description
- TELESCOPIC ANTENNA (BACK)
- MODE BUTTON
- PLAY/PAUSE BUTTON
- PREVIOUS BUTTON
- NEXT BUTTON
- BATTERY COMPARTMENT (BACK)
- POWER SWITCH
- DC 5V IN JACK
- AUX IN JACK
- SOLAR PANEL 5V IN JACK (DC5V JACK)
- CHARGE INDICATOR LIGHT
- POWER INDICATOR LIGHT
- TF CARD SLOT
- USB SLOT
- HANDLE
- SPEAKER
- PHONE BRACKET (PULL)
- 2 WAYS LED LIGHT
- SOLAR PANEL
Warnings
- Do not install this equipment in a confined or building-in space such as a book case or similar unit and remain a well ventilation conditions at open site. The ventilation should not be impeded by covering the ventilation openings with items such as newspaper, table-cloths, curtains etc.
- WAR.NING: To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture. The apparatus shall not be exposed to dripping or splashing and that objects filled with liquids, such as vases, shall not be placed on apparatus.
- WARNING: The battery (battery or batteries or battery pack) shall not be exposed to excessive heat such as sunlight, fire or like.
- WARNING: The mains plug is used as disconnect device. The disconnect device shall remain readily operable.
- No naked flame sources, such as lighted candles, should be placed on the apparatus.
- Attention should be drawn to environmental aspects of battery disposal.
Instructions
- Put 18650 battery into battery compartment (6) paying careful attention to the polarity.
- When listen to the programmes from FM, please pull out the antenna and change the length to make the listening clear. When you don’t want to listen to the radio, please turn it off and disconnect the USB power cord or take out the batteries. When you don’t want to use the radio for a long time, please take out the batteries from the unit.
Function Instructions
- Long press the power on key to start up, and the default is Bluetooth. After hearing the Bluetooth prompt, open the Bluetooth function of the mobile phone for pairing and connection with Bluetooth number “FP-BT”;
- Open the mobile phone player to play music directly after the connection is successful. To select a song, press the Previous or Next buttons to select the song and press the Play/Pause button to play.
- When dialing and answering the phone, the speaker of the host machine has a prompt sound of “beep”. Press the language key once to make a phone call, press the answer button again to hang up.
- MP3 use note: There will U disk MP3 song or TF card in the machine, machine will automatically play music. If you want to choose songs, gently press the Next button or Previous button to select the curve up and down, if long press for 3 seconds the two buttons can quickly backward or forward. Gently press Play/Pause button to suspend play.
- Radio instruction: Press the MODE button gently to turn to the FM state, then pull out the antenna and place it in a good position. Press the Play/Pause button for a long time of 3 seconds and the radio will be automatically searched and stored in a good position. After the automatic search is completed, click Previous or Next button to select the radio station.
- Volume Control: If you press the Pervious button for a long time, the volume will gradually decrease. If you press the Next button for a long time, the volume will gradually increase. When the volume is up to the maximum, the machine will make a “beep beep” sound.
- Long press the power button to shutdown. If there is no equipment operation within 5 minutes of standby, it will automatically shutdown.
Note:
- This model includes built in rechargeable battery.
- In order to prolong battery life and product normal use, charging time please keep 6-8 hours.
Notes for Using Rechargeable Batteries:
After disassembling and installing rechargeable batteries, please plug in
the power supply or charger to activate the battery, then turn on the power of
the unit to work normally.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Caution: Any changes or modifications to this device not explicitly
approved by manufacturer could void your authority to operate this equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions:
- This device may not cause harmful interference, and
- This device must accept any interference received, including interference that may cause undesired operation.
The device has been evaluated to meet general RF exposure requirement.