veatool Bluetooth Headphones True Wireless Earbuds with 4 Mics User Manual
- June 6, 2024
- Veatool
Table of Contents
veatool Bluetooth Headphones True Wireless Earbuds with 4 Mics User Manual
Packing List
-
Earbuds X 2
-
Charging Case X 1
-
Couple Eartip X 3
-
USB-C Charging Cable X 1
-
User Manual X 1
Note: The medium-sized eartips are pre mounted on the earbids.
Product Overview
Wear
Step 1: Choose the comfortable eartips
Step 2: Wear it in ear adjust to a comfortable position ( Please put the right and left headphones on the correct ear).
Power On
Auto Power On:
When opening the charging case and taking out the earphones. The earphones
will automatically turn on and start pairing.
Manual Power On :
In the shutdown status and when the earphones are not in the charging case,
press and hold the MFB of earbuds for 1.5 seconds to power on.
Note: When the pairing is successful, the red and white lights will be on for 2 second at the same time.
Power Off
Method 1
Put the earphones back in the charging case and close the case to turn them
off.
Method 2
If the earphones are not in the charging case, just press and hold the MFB of
the earbuds for 3 seconds to power them off.
Pairing
Stereo Mode
Open the charging case and take out the earphones. They will automatically
enter the pairing mode. In this mode, turn on the Bluetooth of the phone and
select “VEATOOL E3”.
Single Earbud Mode
- Take one earbud(L/R) out from the charging case and close the case.
- Turn on Bluetooth of your phone and choose “VEATOOL E3”.Earbud can pair with your phone.
Phone Calls Control
Music
Charging
Earbuds Charging
Put both earbuds into charging case and close case, earbuds are being charged
and led power display on case will move.
Charging for the case
Method 1:
Use USB C charging cable(Provided) to connect an adapter (not provided) your
charging case.
Method 2:
Put the charging case on wireless charger(not provided). Please keep Led power
display facing up, case can be charged automatically.
Note: for method 2, please place the charging case on the wireless charger until the LED power display flashes, which indicates case is being charged.
Safety Instruction
- Using earphone at high to moderate volumes for extended periods of time will result in permanent hearing damage. It is advised you keep volume levels moderate to low at times for your safety.
- Do not use while driving a car, cycling, operating machinery, or performing other activities that require hearing surrounding sounds.
- Do not use earphone in thunderstorm weather, the earphone may not work properly in the condition, and increase the risk of bring hit by lightning.
- Earphone may not work properly under high temperature or high humidity conditions. Do not use any corrosive cleaner/oil to clean the earphone.
- If the earphone comes in contact with liquids, quickly wipe away.
- 1f submersed in water, do not turn the earphone on until completely dried. Tips: liquid submersion voids the warranty.)
- Keep the earphone and packaging out of reach of children.
- Please use the original charging cable provided by the earphone manufacturer for charging and choose the.
FAQ
Q: Why these earbuds can not pair with my mobile phones?
A :
- Please make sure the earbuds are full charged and power on.
- Please make sure the Bluetooth of your phone is turn on.
- If above 2 points have no problem, please put earbuds into the case again and dose the case, hold on for 1min, then open the charging case and reconnect earbuds with your phone.
Q: Why does the music cut in or cut out?
A : First, please do not let the distance between these earbuds and your phone more than 33 feet(without obstacle).lf the distance less than 33 feet, Please note 2 tips as below:
- Please make sure there is no obstacle between the earbuds and your device.
- Please make sure there Is no Microwave oven/Wi-Fi transmitter around you, which are more likely to produce electromagnetic interference and result in signal interruption.
Q: Why does the earbuds can not be charged and not disconnected with my phone even earbuds are put into case and I have closed the case?
A : Please make sure the charging case are not in low battery, if the charging case are in low battery, earbuds can not be charged and not disconnected even though they are in case. So, please use the type-c cable to charge the case fully.
Q: How to contact VEATOOL Customer service?
A : VEATOOL offers a one-year replacement warranty if there is an Issue with your VEATOOL E3, please don’t hesitate to contact us, we will reply within 24 hours and resolve it 100%.
Customer Support
Email: [email protected]
Web: veatool.cn
FCC Warnings
This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (I) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Warning: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Radiation Exposure Statement
The device has been evaluated to meet general RF exposure requirement. The
device can be used in portable exposure condition without restriction