motorola MOTO BUDS 150 True Wireless Earbuds User Guide
- June 6, 2024
- Motorola
Table of Contents
motorola MOTO BUDS 150 True Wireless Earbuds User Guide
Charging
Fully charge before use
The device can be powered through a USB-C from any CE compliant power source
that implement the European interface as requested by EN 301 489-52.
Pairing
-
Ensure both buds are inside the charging case and take out both buds. The buds will flash blue and red.
-
Select “MOTO BUDS 150″ from the smartphone bluetooth menu.
Fitting
- To optimize the best fit and audio experience, it is recommended to try different earbud sizes.
- Insert the MOTO BUDS into your ear and rotate to fit comfortably.
Basic Operation
Additional Operation
Reject a call
| MFB 2sec
---|---
Receive incoming and on hold ongoing call
| Single Press MFB
LED Indicator
Pairing
| Red-blue flash
Standby|
Blue flash
Charging
| Red steady
Fully charged| Off
Battery low|
Red flash
FCC and IC regulations (FCC Part 15)
NOTE: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the Federal
Communications Commission (FCC) rules.
Industry Canada. This device complies with Industry Canada licenceexempt RSS
standard(s): Operation is subject to the following Two conditions:
- this device may not cause interference, and
- this device must accept any interference, including interference that may cause undesired operation of the device.
Disposal of the Device (environment)
At the end of the product life cycle, you should not dispose of this product
with normal household waste. Take this product to a collection point for the
recycling of electrical and electronic equipment. The symbol on the product,
user’s guide and/ or box indicates this.
Some of the product materials can be re-used if you take them to a recycling
point. By reusing some parts or raw materials from used products you make an
important contribution to the protection of the environment. Please contact
your local authorities in case you need more information on the collection
points in your area.
European Union Directives Conformance Statement
The following CE compliance information is applicable to Motorola products
that carry one of the following CE marks:
Hereby, MZGW declares that this product is in compliance with:
- The essential requirements and other relevant provisions of RED Directive 2014/53/EU
- All other relevant EU Directives
- The Declaration of Conformity can be obtained at motorolasound.com
UK Declaration of Conformity
Hereby, MZGW declares that this product is in compliance with the requirements
for UKCA marking. The Declaration of Conformity can be obtained at
motorolasound.com
Imported and distributed by: A.I.&E., Adriaan Mulderweg 9-11, 5657 EM
Eindhoven, The Netherlands. Edco UK Ltd, 1st Floor, Two Chamberlain Square,
Birmingham, B3 3AX, UK.
Global V6
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>