ResMed Mirage SoftGel Nasal Mask User Guide
- June 6, 2024
- ResMed
Table of Contents
Mirage™ SoftGel
NASAL MASK
Fitting Guide
| |
---|---|---
• Turn the MicroFit dial to position 24, so that the forehead support is fully
extended.| • Disconnect the lower headgear clip, hold the mask over the nose
and pull the headgear over the head.| • Reconnect the lower headgear clip
ensuring it clicks into place.
| |
• Adjust the upper straps evenly.
Do not overtighten.| • Adjust the lower straps to a comfortable position.
Do not overtighten.| • Connect one end of the air tubing to the swivel and the
other end to the airflow device.
• Turn on the airflow device.
|
---|---
• Adjust the dial to correct any leak at the nose.| • Adjust bottom straps to
correct any leak at the top lip.
Manufacturer: ResMed Pty Ltd 1 Elizabeth Macarthur Drive Bella Vista NSW 2153
Australia. Distributed by: ResMed Corp 9001 Spectrum Center Boulevard San
Diego CA 92123 USA;
ResMed (UK) Ltd 96 Milton Park Abingdon Oxfordshire OX14 4RY UK See
www.resmed.com for other ResMed locations worldwide. Mirage is a trademark of
ResMed Pty Ltd and is registered in U.S. Patent and Trademark Office. © 2010
ResMed. Specifications may change without notice. 1013901/1 10 02
global leaders in sleep and respiratory medicine
www.resmed.com
References
- Sleep apnea and COPD - learn about symptoms and treatment | ResMed
- Legal disclaimers and intellectual property - ResMed