MASTECH MS2128 Digital Clamp Meter User Guide
- June 6, 2024
- MASTECH
Table of Contents
MASTECH MS2128 Digital Clamp Meter User Guide
The special attention should be paid when using the test and measurement
instrument because the improper usage may cause electric shock and damage the
equipment.
– Use proper measurement category (CAT), voltage, and amperage rated probes,
test leads, and adapters for the measurement.
– Do not use or store the device around explosive gas, vapor, or under high
temperature and humidity.
– When handling the test probes and crocodile clips, keep your fingers behind
the physical guard.
– Examine the measuring test leads (if present) before use. Any element of
which the insulation is deteriorated (even partially), replace them with
proper functional test leads.
– Connect the common test lead before the live test lead and remove the live
test lead before the common test lead.
– Before measuring current, make sure the instrument fuses available and
disconnect the power supply to the circuit test
– Remove the batteries if the device is not used for an extended period of
time, or if stored in temperatures above 45 °C. If the batteries are not
removed, battery leakage can damage the device.
Contents
Specifications
EMEA
MGL EUMAN S.L.
C/ Picu Castiellu, Parcelas i1-i4 33163,
Argame Morcín, Asturias, Spain
Tel: +34 985-08-18-70
Email: [email protected]
USA MGL AMERICA, INC.
2810 Coliseum Centre Drive,
Ste. 100 Charlotte,
North Carolina 28217 USA
Tel: +1 833-533-5899
Email: [email protected]
UNITED KINGDOM
MGL GROUP U.K. LIMITED
14 Weller St, London, SE1 1QU, UK
Tel: +34 985-08-18-70
Email: [email protected]
MEXICO & LATAM
MGL LATAM S.A DE CV
Colonia Industrial Vallejo Del.
Azcapotzalco 02300, Mexico D.F
Tel: +1 833-533-5899
Email: [email protected]
SKU Number: MS2128CBGLO
APAC
MGL APPA Corporation
Flat 4-1, 4/F, No. 35, Section 3Minquan East Road.
Taipei, Taiwan.
Tel: +886 2-2508-0877
Email: [email protected]
SKU Number: MS2128CBGLOhttp://www.mastech-group.com/support.php?n=0