KLARK TEKNIK KonneKT 6 IOBT-WP Bluetooth and Analogue Audio Network Wall IO Plate User Guide

June 6, 2024
Klark Teknik

KonneKT 6 IOBT-WP Bluetooth and Analogue Audio Network Wall IO Plate

Quick Start Guide
klarkteknik

KonneKT 6 IOBT-WP
KonneKT Bluetooth® and Analogue Audio Network Wall IO Plate
V 1.0 A54-00000-00000

Introduction

Welcome! Thank you for purchasing the KonneKT 6 IOBT-WP Network Wall Input Plate. In conjunction with DM Designer programming and control software, the 6 IOBT-WP panel provides balanced analogue audio inputs and outputs for digital audio networks.

  • Bluetooth* and analogue audio network IO wall plate
  • Dante*/AES67 network audio and control transport
  • Bluetooth wireless technology for 2-way audio bridging
  • RCA line level analogue audio input
  • 3.5mm TRS line level analogue audio input
  • 3.5mm TRS line level analogue audio output
  • Functions as POE powered device
  • Customisable Bluetooth naming
  • Bluetooth defeating ability for custom requirements
  • Multi-colour LED reflects the status and facilitates network ID
  • Fits standard US and EU 2 gang electrical backboxes
  • Black and white trim plates included · Programmed and controlled by DM Designer software

*Dante is a trademark of Audinate Pty Ltd. All third-party trademarks are the property of their respective owners. Their use neither constitutes a claim of the trademark nor affiliation of the trademark owners with Music Tribe. Warranty details can be found at musictribe.com. The Bluetooth word mark and logos are owned by the Bluetooth SIG, Inc., and any use of such marks by Music Tribe is under license.

Front Panel

front panel

1. BLUETOOTH  Use this Bluetooth button to pair the wall plate with external Bluetooth devices for wireless audio transmission. The Bluetooth connection can transmit both ingoing and outgoing stereo audio signals.
2. STATUS LED ­This LED strip lights up to indicate status and network ID.
3. AUDIO INPUT   This section contains dual analogue inputs: dual RCA jacks and a
3.5 mm TRS jack. The RCA jacks accept connections from external audio devices via unbalanced cables with RCA connectors. The 3.5 mm TRS jack accepts analogue signals from external audio sources via a single connection.
4. AUDIO OUTPUT Use this 3.5 mm TRS jack to send out line-level analogue signals for external devices.

Bluetooth

KonneKT 6 IOBT-WP has two pairing modes for Bluetooth: Manual Mode and Reconnect Mode. Reconnect Mode keeps a running 10-device list of previously- paired devices, and the Bluetooth circuit will reconnect automatically. Manual Mode eliminates automatic reconnect and pairing history for situations where casual users in public venues have access. You can choose the pairing mode in the DM Designer software.

To pair in Manual Mode:

  1. Press the Bluetooth button on the front panel once.
  2. The pairing period lasts 60 seconds, during which the blue status indicator will flash.
  3. In your external device’s Bluetooth menu, select KonneKT 6 IOBT-WP (the specific name can be customized in the DM Designer software) from the list of available devices.
  4. When pairing is successful, the LED will stop flashing and stay lit.
  5. To disconnect, press and hold the Bluetooth button for 5 seconds. The status LED will turn off, and the connection will reset.
    In Reconnect Mode, the initial pairing process is the same, and then you can pair by simply selecting the KonneKT 6 IOBT-WP device name in your device’s Bluetooth menu. Reconnect Mode maintains a list of 10 recent devices for quick reconnection. If the list is already full, a random device from the list will be removed to make space for the new device.

assembly mounting

Assembly and Mounting

The KonneKT 6 IOBT-WP fastens into the installation enclosure with two screws beneath the
front plate. Remove the front panel and fasten the main unit into the enclosure with the provided mounting screws. When the unit is securely fastened, replace the front panel.

Dimension

dimension Dimension size

Specifications

Analogue Inputs

Type|

1 x 3.5 mm TRS, unbalanced
and RF filtered / 2 x RCA

Impedance|

9.5 kΩ unbalanced

Maximum input level|

+18 dBu (RCA L+R or TRS T+R)
(12 dBu, RCA L/R, TRS T/R)

Gain range|

0 to +40 dB, 1 dB steps

Audio Input Performance

Signal-to-noise ratio|

95 dB, unweighted

THD + N|

≤ 0.003% @ 1 kHz, 14 dBu input

Frequency response|

20 Hz to 20 kHz, ±0.5 dB

Analogue Outputs

Type|

1 x 3.5 mm TRS, stereo, RF filtered

Impedance|

50 Ω unbalanced

Maximum output level| 12 dBu
Volume control|

0 to -60 dB, 1 dB increments

Audio Output Performance

Signal-to-noise ratio|

100 dB, unweighted

THD + N|

≤ 0.005% @ 1 kHz, 12 dBu

Frequency response|

20 Hz to 20 kHz, ±0.5 dB

Bluetooth

Frequency range|

2402 MHz ~ 2480 MHz

Channel number| 79
Version|

Bluetooth spec 5.0 (dual mode)

Max output power| < 10 dBM
Compatibility|

Supports A2DP 1.2 profiles

System

LED indicators|

Input status, network ID

Ethernet (configuration and control)| 1 x RJ45
Cable quality| CAT-5e or better
Cable length|

Up to 100 m (328 ft)

Digital network format| Dante / AES67
Bit depth| 24-bit
Signal-to-noise ratio| 48 kHz

Power

Power supply|

PoE (802.3at type 1
class 0 PoE PD compliant)

Power consumption| < 3 W

Ph ysical

Gross weight|

615.4 g (21.7 oz)

Net weight|

421.5 g (14.87 oz)

LEGAL DISCLAIMER
Music Tribe accepts no liability for any loss which may be suffered by any person who relies either wholly or in part upon any description, photograph, or statement contained herein.

Technical
specifications, appearances and other information are subject to change without notice. All
trademarks are the property of their respective owners. Midas, Klark Teknik, Lab Gruppen,
Lake, Tannoy, Turbosound, TC Electronic, TC Helicon, Behringer, Bugera, Oberheim, Auratone,
Aston Microphones and Coolaudio are trademarks or registered trademarks of Music Tribe Global Brands Ltd. © Music Tribe Global Brands Ltd. 2021 All rights reserved.

FEDERAL COMMUNICATIONS COMMISSION

COMPLIANCE INFORMATION

Responsible Party Name: Music Tribe Commercial NV Inc.
Address: 5270 Procyon Street,
Las Vegas NV 89118,
United States
Phone Number: +1 702 800 8290
FCC ID: QWH6IOBT-WP
KonneKT 6 IOBT-WP
This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This equipment generates,
uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

Consult the dealer or an experienced radio/TV technician for help.
This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause undesired operation.

Important information:

Changes or modifications to the equipment not expressly approved by Music Tribe can void the user’s authority
to use the equipment.
KonneKT 6 IOBT-WP

Caution!
The manufacturer is not responsible for any radio or TV interference caused by unauthorized modification to this equipment. Such modifications could void the user authority to operate the equipment.
FCC RF Radiation Exposure Statement:
(1) This Transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
(2) This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment.
This equipment should be installed and operated with minimum distance of 20 centimeters between the radiator and your body.
Hereby, MUSIC Tribe declares that this product is in compliance with Directive 2014/53/EU, Directive 2014/30/
EU, Directive 2014/35/EU, Directive 2011/65/EU and Amendment 2015/863/EU, Directive 2012/19/EU,
Regulation 519/2012 REACH SVHC and Directive 1907/2006/EC.
Full text of EU DoC is available at https://community.musictribe.com/
EU Representative: Music Tribe Brands DK A/S
Address: Ib Spang Olsens Gade 17, DK – 8200 Aarhus N, Denmark

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Klark Teknik User Manuals

Related Manuals