Rust Sales Inc 478-7801 Trench Wheels User Manual

Rust Sales Inc 478-7801 Trench Wheels

Limited Warranty Statement

Rust Sales, Inc. warrants each new Trench Wheel to be free from defects in material and workmanship. This warranty is applicable only for the normal service life expectancy of the product or components, not to exceed 6 consecutive months from the date of the delivery of the Trench Wheel Product to the original purchaser, or the date the product is first put into service via a rental agreement or other means, whichever occurs first. This warranty coverage applies only to the original owner and is not transferable. Under no circumstances will it cover any merchandise or components thereof, which in the opinion of the company has been subject to misuse, unauthorized modification, alterations, improper installation, maintenance, an accident or if repairs have been made with parts other than those obtained through Rust Sales, Inc. Our obligation under this warranty shall be limited to repairing at our facility or replacing, free of charge to the original purchaser, any part that, in our judgment, shall show evidence of such defect, provided further that such part be returned within 30 days from the date of failure to Rust Sales, Inc. routed through the dealer from whom the purchase was made, transportation charges prepaid. Proof of purchase must also accompany the returning defective part. This warranty shall not be interpreted to render Rust Sales, Inc. liable for injury or damages of any kind or nature to person or property. This warranty does not extend to the loss revenue, extra labor cost associated with downtime, substitute machinery, rental or for any other reason.
Except as set forth above, Rust Sales, Inc. shall have no obligation or liability of any kind on account of any of its equipment and shall not be liable for special or consequential damages. Rust Sales, Inc. makes no other warranty, express or implied, and specifically, Rust Sales, Inc. disclaims any implied warrant or merchantability or fitness for a particular purpose. Some states or provinces do not permit limitations or exclusions of implied warranties or incidental or consequential damages, so the limitations or exclusions in this warranty may not apply. This warranty is subject to any existing conditions of supply which may directly affect our ability to obtain materials or manufacture replacement parts. No one is authorized to alter, modify or enlarge this warranty nor the exclusion, limitations and reservations Rust Sales, Inc. reserves the right to make improvements in design or changes in specifications at any time, without incurring any obligation to owners of units previously sold.

Important Safety Information

Trench Wheels

Save Your Crop –800-478-7801 

•  Adaptor plates should be mounted on the ATV hub side of the Trench Wheel Except on some JD Gator models.
•  Polaris ATV/UTV do not require adaptor plates Except for Ranger/RZR 900-1000.
• Note: If lug nuts are tapered, mount nut to wheel with tapered end pointing out and flat side against the adapter plate or Trench Wheel.

ATVs with STRAIGHT REAR AXLE

1. ALWAYS mount adapter plates on the Trench Wheels with “bolt heads” on hub side or threads pointing away from ATV hub.
2. Front wheels – Bolt adapter plates in the Trench Wheel dish.
3.  Install the Trench Wheel on the ATV “dished in.” The dish in the wheel corrects the offset between the front and rear axle.
4. Rear wheels – Bolt adapter plates on the flat side of the Trench Wheel.
5. Install theTrench Wheel on the ATV “dished out.”
6. Torque wheel nuts to manufacturers specifications.
7. Make sure there is sufficient clearance between the Trench Wheel and brake components.
8.  Check to make sure the Trench Wheels have enough clearance with the ATV/UTV’s fenders while turning.
9. Install Trench Wheels Caution Decal to tank/handlebar area of ATV/UTV.

Save Your Crop –800-478-7801 

• Adaptor plates should be mounted on the ATV hub side of the Trench Wheel Except on some JD Gator models.
• Polaris ATV/UTV do not require adaptor plates Except for Ranger/RZR 900-1000.
• Note: If lug nuts are tapered, mount nut to wheel with tapered end pointing out and flat side against the adapter plate or Trench Wheel.

ATVs with INDEPENDENT REAR SUSPENSION

1.  ALWAYS mount adapter plates on the Trench Wheels with “bolt heads” on hub side or threads pointing away from ATV hub.
2. All Wheels: Bolt adapter plates in the Trench Wheel dish.
3. Install the Trench Wheel on ATV “dished in”.
4. Torque wheel nuts to manufacturers specifications.
5. Make sure there is sufficient clearance between the Trench Wheel and brake components.
6.  If not, remove the Trench Wheels and re-install the Trench Wheel “dished out.”
7. Check to make sure the Trench Wheels have enough clearance with the ATV’s fenders while turning.
8.  Install Trench Wheels Caution Decal to tank/handlebar area of ATV/UTV.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>