KLARK TEKNIK AIR LINK DW 20BR Bluetooth Wireless Stereo Receiver User Guide

: June 5, 2024
: Klark Teknik

Table of Contents

AIR LINK DW 20BR
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

AIR LINK DW 20BR

KLARK TEKNIK AIR LINK DW 20BR Bluetooth Wireless Stereo
Receiver

KLARK TEKNIK AIR LINK DW 20BR Bluetooth Wireless Stereo Receiver
A

Controls

Step 1: Controls

(1) PAIR button – enables the unit to become available for pairing by pressing and holding the button for 4 seconds. The LED ring will indicate the current status. See the Getting Started section for details.
(2) LEVEL knob – adjusts the volume of the signal sent to the output jacks.
(3) DC INPUT – accepts the included power adapter.
(4) OUTPUTS – connect to an amp, powered speakers, or mixer via balanced XLR or unbalanced ¼” TS cables.

Getting started

Step 2: Getting started

Connect the DW 20BR to a mixer or speaker system with either XLR or ¼” cables. Keep the volume on the speaker or mixer channel turned all the way down to avoid popping noises. Do not connect the power cable yet.
On your smartphone or tablet, activate Bluetooth and scan for available devices.
Connect the power adapter to the DW 20BR and to a power outlet. The unit will turn on automatically and try to pair with the most recently connected device.
To connect a new device, press and hold the PAIR button for 4 seconds. The LED ring will flash quickly to indicate that it is ready to pair.
Select the DW 20BR from the list of available items in the Bluetooth settings menu of your Bluetooth device. The DW 20BR LED will light solid with no flashing to indicate successful connection.
Note – disable cellular reception when streaming audio from a cell phone.
Start playing audio from your Bluetooth device. Adjust the volume on the Bluetooth device, then turn up the LEVEL knob so that the speaker or mixer receives a strong signal.
Turn up the volume on your speaker, mixer, amps, etc. until you reach the desired listening level.

Connection Notes:

– If your Bluetooth audio device is compatible, Play/Pause can be toggled with a short press of the PAIR button on the DW 20BR while the Bluetooth stream is active.
– Audio cannot stream from a single Bluetooth device to multiple DW 20BR units simultaneously.
– If you have already connected to one DW 20BR unit and want to switch to another unit, follow these steps:

On an Android device, delete the first unit from the Bluetooth device list, then perform a new search/pair as described above.
On an iOS device, it is possible for 2 units to appear connected in the Bluetooth settings menu. In this case, you can select which unit will receive audio via the music application’s settings. Both units will have the name “Klark Teknik DW 20BR”.

Specifications

Outputs

Note: The ¼” output level is 6 dB lower than the XLR outputs Operation Ambient Temperature up to 45°C

LEGAL DISCLAIMER

Music Tribe accepts no liability for any loss which may be suffered by any person who relies either wholly or in part upon any description, photograph, or statement contained herein. Technical specifications, appearances and other information are subject to change without notice. All trademarks are the property of their respective owners. Midas, Klark Teknik, Lab Gruppen, Lake, Tannoy, Turbosound, TC Electronic, TC Helicon, Behringer, Bugera, Oberheim, Auratone, Aston Microphonesand Coolaudioare trademarks or registered trademarks of Music Tribe Global Brands Ltd. © Music Tribe Global Brands Ltd. 2021 All rights reserved.

LIMITED WARRANTY

For the applicable warranty terms and conditions and additional information regarding Music Tribe’s Limited Warranty, please see complete details online at musictribe.com/warranty.

FEDERAL COMMUNICATIONS COMMISSION COMPLIANCE INFORMATION

Klark Teknik

AIR LINK DW 20BR

Responsible Party Name: Music Tribe Commercial NV Inc.
Address: 5270 Procyon Street, Las Vegas NV 89118, United States
Phone Number: +1 702 800 8290

AIR LINK DW 20BR

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.

This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions:

(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause undesired operation.

Important information:

Changes or modifications to the equipment not expressly approved by Music Tribe can void the user’s authority to use the equipment.

Caution!

The manufacturer is not responsible for any radio or TV interference caused by unauthorized modification to this equipment. Such modifications could void the user authority to operate the equipment.

FCC RF Radiation Exposure Statement:

(1) This Transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
(2) This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance of 20 centimeters between the radiator and your body.

Hereby, Music Tribe declares that this product is in compliance with Directive 2014/53/EU, Directive 2014/30/EU, Directive 2014/35/EU, Directive 2011/65/EU and Amendment 2015/863/EU, Directive 2012/19/EU, Regulation 519/2012 REACH SVHC and Directive 1907/2006/EC.

Full text of EU DoC is available at https://community.musictribe.com/

EU Representative: Music Tribe Brands DK A/S
Address: Ib Spang Olsens Gade 17, DK – 8200 Aarhus N, Denmark