HILPRESS 11780 Agnes Cable Stripper Instruction Manual
- June 6, 2024
- HILPRESS
Table of Contents
HILPRESS 11780 Agnes Cable Stripper
General Information
Use this tool only for the described purpose. This tool is only to be used in technically perfect condition, in a safety-conscious and risk-aware way. An unauthorized modification or mishandling excludes the liability of the manufacturer and the resulting damages. To guarantee a long life cycle time please keep the hand tool clean and take care of the hand tool in the same way, like you do with high precision tools. The movable parts of the hand tool should be oiled from time to time. Marketable goods from 0,03 to 16,0 mm² can safely be stripped with the stripping tool AGNES. The POWERPLUS is matched to this application range and factory-provided adjusted. By adjusting into the + or – area the setting range of the respective insulation thickness or cable type can be matched.
The correct stripping lengths
The cable has to be stripped to the correct length to receive a good crimping
result. Please follow the specifications of the contact material!
Features overview
- Mounting eye
- SAFELINE (safe storage of blades)
- PUR-spring-block
- Integrated hand protection with automatic closing mechanism
- Cutting function
- Length locator
- Standard stripping blades 0,03 – 16 mm² (exchangeable)
- Insulation grip (for holding cable)
- POWERPLUS (Adjustment of the insulation thickness)
- Locking device (to close the tool – useable only with standard stripping blades)
Cutting function
- Insert wire in the blade opening up to the wanted length.
- Close the tool to cut the wire.
- Open the tool.
Stripping
- Pinch the length locator together and slide it to the required stripping length of wire.
- Insert the wire into the length locator until it stops.
- Close the tool until the jaws release.
- Remove the correctly stripped wire.
Replacement of the blade
INFORMATION The exchange device for the easy replacement of the blades is
a part of the spare part blade set and is not included in the standard
delivery of the tool.
- SAFELINE (safe storage of blades and exchange device)
- Stripping blades for 0,03-16,0 mm² wire (exchangeable)
Exchange assistant for the easy replacement of the blades
-
Open SAFELINE upwards and insert the exchange device into the pocket of the handle for safe storage.
WARNING Do not touch into the cutting edge during the exchange of the blades. Risk of cutting!
-
Insert the exchange device into the space below the stripping jaws (arrow of the exchange device is lying downwards/raised protion toward the handle) as pictured.
-
Push the blade out of the groove and remove it carefully. If necessary insert new blade into the groove until it stops.
-
Close the handle until it stops and hold it
-
Exchange the upper blade accordingly.
-
Store the blades and the exchange device which are not needed into the pockets of the SAFELINE.
Locking of the tool
INFORMATION The locking device is only useable with the standard stripping blades!
- Push down the locking device and close the tool slightly. Hook the locking device on the lower handle. The tool remains closed.
- Closed condition of the tool. Close the tool slightly to release the locking function.
Remove PUR-spring-block
INFORMATION The PUR-spring-block prevents a jerky movement of the tool during the stripping process. Wear damages on hands and forearms will be obviated. The PUR-spring-block is a removeable single part and which can be taken or inserted as follows:
- Remove the PUR-spring-block with the help of a screwdriver.
- PUR-Spring-block removed
