SYOSIN Q07 Ring Light Selfie Stick Instructions
- June 6, 2024
- SYOSIN
Table of Contents
selfie stick
Instructions for use
Unload and load
Unloading and loading
Replacement battery
Cut out from the groove on the left Open the remote control cover.
How to use
- Turn on: Long press the camera button for 3 seconds to turn on.
- Bluetooth pairing: the indicator light flashes for 4 seconds to enter the pairing state, the blue indicator light of the pairing state flashes, use the mobile phone to search for “Selfie” to match, and the blue indicator light will go out after the pairing is successful.
- Take a photo: When the Selfie is connected to the mobile phone, short press the camera button and the blue light flashes.
- No pairing: After booting, in the state of no pairing connection, it will automatically shut down after 5 minutes of no operation.
- Pairing: After turning on the phone, when the Selfie is connected to the phone, it will enter the dormant state if there is no operation for 10 minutes, and it will automatically shut down after another 10 minutes.
- Power off: In power on and sleep mode, press and hold the camera button for 3 seconds to power off, the indicator light flashes and goes out.
Open the tripod
Open outward at the handle position, you can Change to tripod mode.
Lamp mode
White Light : Soft, Medium, Bright ;
Warm Light : Soft, Medium, Bright ;
White and warm light : soft light, medium light, bright light.
Lamp parameters
White light colour temperature : 6500K 28 pcs
Warm light colour temperature : 2900K 28pcs
Lamp power : 0.2W/pc
- Maximum operating current :1A
- Motherboard standby current : <50uA
- Motherboard cut-off voltage : Battery protection board decision
- Charging current and voltage of the motherboard: 1A/5V
The purpose of the ring lamp
In the live broadcast more beautiful, highlighting the person’s five- dimensional sense, and protect the eyes; It can also be used as a table lamp, outdoor lamp and other things multi-use.
How to use the lamp
Figure (1)Battery :1200mAh
Maximum power usage time : 2.0h
Light charging time : 180min
Figure (2) Long press the button to turn on the light, and then press to dim; long press to turn off the light and remember the state before turning off the light.
Specifications
- Main material: ABS+Aluminum alloy
- Mounting seat: 60-98mm
- Storage size: 195mm
- Extended length: 798mm
- Product reference: 195 160 63mm
- Product weight: 368g
- Battery: CR1632 (replaceable)
(The battery must not be exposed to such as sunlight, fire or similar overheating environment)
RFMIND
Selfie stick compatible with Android 4.2.2 and iPhone ios 5.0 and above (Android devices:lf you change your “Volume key function”, be sure to change it into default, or “take a picture” to let the selfie stick normal lying)
Thank you for your support!
Federal Communications Commission (FCC) Statement. This device complies with
part 15 of the FCC Rules. Operation is subject to the following two
conditions:
(1) This device may not cause harmful interference, and
(2) this device must accept any interference received,
including interference that may cause undesired operation. Note: This
equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide Reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more
of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Warning: Changes or modifications made to this device not expressly approved by Fellowes Inc may void the FCC authorization to operate this device.Note: The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications to this equipment. Such modifications could void the user’s authority to operate the equipment.
RF exposure statement:
The device compliance RF exposure requirement and can installed and used
without restriction.