Rowenta IXEO-QR1411 Professional Iron & Steamer User Manual
- June 3, 2024
- Rowenta
Table of Contents
Rowenta IXEO-QR1411 Professional Iron & Steamer
IMPORTANT SAFETY INSTRUCTIONS
When using an appliance, basic precautions should always be followed, including the following:
READ ALL INSTRUCTIONS BEFORE USING
- Only use an appliance for its intended use.
- To avoid the risk of electric shock, do not immerse the appliance in water or other liquids.
- Always turn the appliance OFF before plugging or unplugging the appliance from the electrical outlet. Never pull on the cord to disconnect the appliance from the electrical outlet; instead, grasp the plug and pull on the plug to disconnect the appliance.
- Do not let the cord touch hot surfaces. Let the appliance cool completely before putting the appliance away.
- Always disconnect the appliance from the electrical outlet before filling the appliance with water, emptying the water from the appliance, and when the appliance is not in use.
- Do not operate the appliance with a damaged cord or in the event the appliance has been dropped or damaged. To avoid the risk of electric shock, do not disassemble the appliance. Take it to a qualified serviceman for examination and repair. Incorrect assembly might result in a risk of electric shock when the appliance is used after reassembly.
- Close supervision is required for any appliance used by or near children. Do not leave the appliance unattended while the appliance is connected.
- Burns can occur from touching hot metal parts, hot water, or steam. Use caution when you turn an appliance upside down – there might be hot water in the reservoir.
- To avoid a circuit overload, do not operate an appliance on the same circuit with another high wattage appliance.
- If an extension cord is absolutely necessary, a cord with an ampere rating equal to or greater than the maximum rating of the appliance shall be used. A cord rated for less amperage can result in a risk of fire or electric shock due to overheating. Care shall be taken to arrange the cord so that it cannot be pulled or be tripped over.
- This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.
- Children should be supervised to ensure that they do not play with the appliance.
- The appliance must be used and rested on a stable surface;
- When placing the appliance on its stand, ensure that the surface on which the stand is placed is stable;
- The appliance must not be left unattended while it is connected to the supply mains.
- Cleaning and user maintenance shall not be made by children without supervision.
- The appliance is not to be used if it has been dropped, if there are visible signs of damage or if it is leaking.
- Always disconect the appliance from the electrical outlet, before you leave the room.
- To reduce the risk of contact with hot water emitting from steam vents, check appliance before each use by holding it away from body and operating steam button.
SAVE THESE INSTRUCTIONS
WHAT WATER MAY BE USED?
Your appliance has been designed to operate using untreated tap water. If in
doubt, check with your local water authority. However, if your water is very
hard, you can mix 50% untreated tap water with 50% distilled or demineralized
water.
IMPORTANT Heat concentrates the elements contained in water during
evaporation. The types of water listed below contain organic waste or mineral
elements that can cause spitting, brown staining or premature wear of the
appliance: water from tumble dryers, scented or softened water, water from
refrigerators, batteries or air conditioners, pure distilled or demineralized
water or rain water should not be used in your appliance. Also do not use
boiling, or bottled mineral water, or any other additive water.
ENVIRONMENT
Environment protection first!
- Your appliance contains valuable materials which can be recovered or recycled.
- Leave it at a local civic waste collection point.
PRODUCT OVERVIEW
PRODUCT PRESENTATION
- Hanger hook
- Tilting board + cover
- Removable & lockable iron rest
- Iron
- Water hose
- Height lockers
- Collapsible poles
- On/Off switch
- Steam unit
- Wheels
- Water tank
- Iron soleplate
- Steam trigger
- Water tank inlet
- Fabric brush*
- Clips*
BEFORE FIRST USE
On first use, fumes and odour may come from the appliance. They do not affect
the use of the appliance and disappear quickly. Small particles may also come
from the iron. These are part of the production process and do not affect
yourself or your garments. They disappear quickly.
The appliance must be used and placed on a flat, stable, heat-resistant
surface. When you place the appliance on its stand, ensure that the surface on
which the stand is placed is stable. Never use the appliance if it is fallen
down.
Note: Never use your appliance board with a classic iron or a steam
generator. Only use your appliance iron.
FIRST USE
Incline the board
Put the hands on each side of the board, raise it vertically, and tilt it EN back until you find your desired position.
Adjust the board and the iron rest height
When the height of the board or of the iron rest needs to be adjusted, unlock the height adjusters. Raise or lower the board/iron rest until the desired position. Fully close the height adjusters to lock in place.
When unlocking the poles, the board may go down. Hold it during manipulations.
PRODUCT USE
Unplug the appliance.
Open the water tank inlet. Fill it, and close the inlet.
Put the iron on the iron rest. Plug the appliance and switch it on. EN Wait until the light stops flashing.
Remove the iron from its rest, and press the trigger until steam comes out. At first use, it might take more time than usual.
Never iron or steam directly on a garment being worn by someone.
STEAM BOOST
Press the steam trigger two times in a second to activate the steam boost.
AUTO-OFF
After 8 minutes of inactivity, the steam unit will change to stand by mode. Light will be flashing. To wake up the appliance, press on the on/off switch and wait until light is on.
After 38 minutes of inactivity, the steam unit will switch off automatically and the light will turn off.
ACCESSORIES
Use the hanger hook to iron a garment placed on a hanger.
FABRIC BRUSH
Before you remove or attach the brush, switch off the appliance and allow it
to cool down for 1 hour.
Put the steam brush on the iron soleplate. This accessory helps to open the
garment fibres for better steam penetration.
REMOVABLE STEAM UNIT
Remove the steam unit off its base.
Unlock this iron rest by pushing on the inside plastic strip. Remove the iron
rest with the iron.
Position the iron and its iron rest on the steam unit.
BONUS
You can also tie your iron & iron rest to the board when you return to the
horizontal board orientation.
To unlock, press the tab in the hanger hook.
Move around with your appliance. Plug in, switch it on, and wait until it heats up. Only use when the base is on stable ground.
Note: Always reposition the iron in its iron rest when not in use, never put the hot soleplate directly on the steam unit
PRODUCT CLEANING
Switch off & unplug the appliance. Wait 1 hour to allow it to cool down completely.
Clean the soleplate with a damp soft cloth or sponge.
Never use abrasive products or surfaces to clean the soleplate.
PRODUCT STORAGE
Switch off & unplug the appliance. Wait 1 hour to allow it to cool down completely.
Empty the water tank.
Tip up the board to the vertical position. Lean the all appliance backwards in order to move & store it away.
PROBLEMS WITH YOUR APPLIANCE
FAQs
What are the disadvantages of Rowenta IXEO-QR1411 steam iron?****
Disadvantages: Steam irons need to be refilled more frequently than other steam ironing systems because they don’t produce as much heat as a steam generator or other steaming systems, which means ironing your fabrics may take a while to remove every crease.
What causes a Rowenta IXEO-QR1411 steam iron to stop working?****
When the iron press’s fuse burns or blows, it may occasionally lose power completely. This is why it’s critical to find a quick solution. IF THIS IS THE CASE, THEN THE ONLY SOLUTION IS TO HAVE A PROFESSIONAL CHECK THE FUSE AND THEN REPLACE IT.
What is the average life of a Rowenta IXEO-QR1411 steam iron?****
Most expensive steam irons ought to last 10 to 20 years. However, there’s a good chance that technology will advance significantly over the next 20 years, so you might decide to upgrade before your iron reaches the end of its useful life.
When should you use Rowenta IXEO-QR1411 steam when ironing?****
If you want to get rid of wrinkles in fabrics, especially delicate fabrics that can’t be ironed like silk, woollens, and items with pleating, a steamer can take the place of an iron. But steaming produces a smooth, unpolished finish; ironing produces a crisp, pressed polish.
Can we use Rowenta IXEO-QR1411 steam iron without water?****
Yes. Simply unplug your steam iron, allow it to cool, and then empty the water tank to remove the water from the iron. Turn the dial to the dry/steam setting, if your iron has one, or to the “MIN” setting, if it doesn’t have a dry/steam setting.
Can you repair a Rowenta IXEO-QR1411 steam iron?****
Most steam iron repairs are for broken cords, cracked handles, and mineral buildup. An authorised service centre should handle issues with an iron’s electronic components. Typically, replacing an iron with internal issues is more affordable than having it repaired.
How long does a Rowenta IXEO-QR1411 steam iron take to heat up?****
Generally speaking, it takes two minutes for your iron to heat up. You can tell when your iron has reached the right temperature for the fabric type you chose by looking at the “Wait” and “Ready” indicators.
How do you maintain a Rowenta IXEO-QR1411 steam iron?****
Keep the anti-calc valve clean. To do this, unplug the iron and give it 45 minutes to cool. Maintain a spotless and smooth soleplate. Wipe the soleplate of your Tefal Access Easy with a damp, smooth cloth to keep it running smoothly. Observe the after-use procedure.
Which water is best for Rowenta IXEO-QR1411 steam iron?****
Therefore, it is advised to use distilled or demineralized water (50 percent tap water and 50 percent demineralized water could also be used) to increase the lifespan of your iron or steamer.
Does Rowenta IXEO-QR1411 steam iron damage clothes?****
A steamer is the best choice if you enjoy using delicate fabrics like wool, cashmere, satin, and silk because they need to be handled carefully and shouldn’t be exposed to excessive direct heat.
Is s Rowenta IXEO-QR1411 team iron good for all clothes?****
For anything that might melt when heated, such as leather, suede, waxed suits, or anything else, steamers and irons should not be used. For those more intricate fabrics, use a dry cleaning service.
Can a Rowenta IXEO-QR1411 steam iron start a fire?****
No surface of the iron shall become hotter than 662°F, as defined by UL Standard 1005, “A Condition that Could Cause a Fire.” According to estimates from the U.S. Consumer Protection Safety Commission (CPSC), there were 400 residential structural fires in 1998.
What temperature is Rowenta IXEO-QR1411 iron steam?****
Depending on the fabric, the heating is typically done at a temperature of 180-220 °Celsius (356-428 °F). Ironing breaks the bonds that hold the long- chain polymer molecules in the fabric’s fibres together.
How do you stop a Rowenta IXEO-QR1411 steam iron from rusting?****
Filling a steam iron requires using distilled water at all times. Even
municipally produced, filter-free water contains minerals that can corrode or
clog your iron.
After each use, empty the water reservoir on the iron. Any drips should be
cleaned up with a microfiber cloth.
Video
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>