SUPERSONIC IQsound IQ-7515DJBT Professional Bluetooth Speaker User Manual

USER MANUAL
IQ-7515DJBT
MADE IN CHINA

CONTROL PANEL

BACK PANEL

REMOTE CONTROL

WELCOME TO BUY THE SERIES OF PROFESSIONAL STAGE SPEAKERS PRODUCED BY OUR COMPANY, THIS PRODUCT CAN PROVIDE YOU WITH GOOD SOUND QUALITY. PLEASE READ THIS MANUAL CAREFULLY BEFORE USING IT TO REACH ITS BEST PERFORMANCE AND AVOID UNNE MARY LOSSES. IF YOU HAVE ANY QUESTIONS, PLEASE ASK HELP FROM THE DEALER OR THE COMPANY DIRECTLY.

FUNCTION INSTRUCTION:

1.MP3 PLAY PREVIOUS SONE
2.MP3 PAUSE/PLAY
3. INPUT SELECTION MODE
4. RECORD FUNCTION
5.MP3 PLAY NEXT SONE
6.MP3 REPEAT ONE/ALL
7. TF CARD JACK
8.MP3 DIGITAL DISPLAY
9. USB CARDJACK
10. VARIATION SELECT
11. TRUE WIRELESS STEREO
12. MICROPHONE PRIORITY
13. EQUALIZER FUNCTION
14. RECORD DELETE
15. LAMP MODE
16. LAMP SWITCH
17. GUITAR INPUT JACK
18. CHARGE INDICATOR LED
19. POWER SWITCH
20. EXTERNAL 12V BATTERY
21. MICROPHONE BASS
22. MICROPHONE TREBLE
23. MICROPHONE ECHO
24. MICROPHONE DELAY
25.MICROPHONE1 INPUT
26.MICROPHONE2 INPUT
27. SIGNAL OUTPUT-L
28. SIGNAL INPUT-L
29. SIGNAL INPUT-R
30. SIGNAL OUTPUT-L| 31. MUSIC TREBLE
32. MUSIC BASS
33. MUSIC X-BASS
34. GUITAR INPUT
35. MICROPHONE VOLUME
36. MUSIC EQ 100Hz
37. MUSIC EQ 500Hz
38. MUSIC EQ 1KHz
39. MUSIC EQ 6KHz
40. MUSIC EQ 12KHz
41. MUSIC VOLUME
42. AC 115V VOLTAGE INPUT
43. REMOTE POWER BUTTON
44. MUSIC VOLUME- BUTTON
45.MP3 STOP BUTTON
46. CHANAL’S PREVIOUS BUTTON 47.PAUSE/PLAY BUTTON
48. REPEAT BUTTON
49. PREVIOUS BUTTON
50. INPUT SELECTION MODE BUTTON
51.0-9 DIGITAL BUTTON
52. MUSIC VOLUME+ BUTTON
53. MUTE BUTTON
54. MUSIC VOLUME+ BUTTON 55.CHANAL NEXT BUTTON
56. MUSIC VOLUME- BUTTON 57.EQUALIZER BUTTON
58. NEXT BUTTON
59. PAUSEIPLAY BUTTON
---|---
Output power (RMS) :
Output impedance:
SIN: Input sensitivity:
Frequency response:
Rating voltage:| 80W
4(ohm)
65d
B 500mV 60Hz-18kHz
—110V/220V 50/60Hz
---|---

PRECAUTION

In order to prevent operating problems or serious damage to the device, please comply with the following remarks:

1. Hold the electric outlet while pulling out the plug. Do not pull the wire.
2. Operating audio appliances should be kept away from heating facilities.
3. Do not attempt to fix or revise the circuit.
4. Do not touch the internal parts, otherwise, electric shock or serious damage to the device might cause.
5. Pull out the plug if not in use for long.
6. Ensure the audio product is in a ventilated dry condition with about 20mm space around as for heating dispersion.

Warning: Do not expose this appliance to rain or moisture, and a vessel containing liquids, such as a cup, vase, is not supposed to be placed on or above the appliance.

TROUBLESHOOTING

into an electric outlet
2. Speaker power button is not turned on| Turn on the button
Function
Light on but No Sound| 1. Cable misconnected| Turn off the power, check the input jack to ensure the proper audio signal is connected to the relevant input jack
2. Audio signal is not transmitted to the speaker| Check all the speakers if there is an audio signal output
If the problem exists after checking the related procedures above, please refer to the appointed service agent or professional technician to fix it. Do not attempt to open the cover, otherwise, we assume no responsibility.

Bluetooth® is a trademark or registered trademark of Bluetooth SIG Inc. iBastek® is a trademark of Bastek Corp. All other trademarks are the property of their respective owners.

IMPORTANT SAFETY MEASURES

Before using this machine, please read all the safety and operating instructions, meanwhile, please observe all the indications about safe operating. This safety and operating instructions should be kept in a condition of consultation.

1. Protection of electric power supply line: Be aware that the electric power supply line is not tramped, pressed by heavy objects. Pay special attention to the plug of the power supply line and outlet on the machine. DO NOT lengthen the electric shock, DO NOT pull or drag the power supply line.
2. Ventilation: This set must be put in a ventilated place. DO NOT put the disk on it or cloth to cover it. The distance away from the wall should not be less than 10 centimeters. DO NOT put this set on the bed, sofa, carpet, or other objects with similar surfaces in case of good ventilation.
3. Casing Dismantling: DO NOT dismantle the casing. If one touches the inner components, he will probably get a serious electric shock.
4. Unusual smell: When you discover an unusual smell and smoke, cut power supplies immediately and pull out the plus from the outlet on the wall. Contact the sell shop or nearest repairing center.

Attention: This setting applies to AC 110V 50Hz-60Hz power supply. Use standard power supply. Please be sure of the correct power supply before using it.

FCC Statement

This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

The device has been evaluated to meet general RF exposure requirements. The device can be used in portable exposure conditions without restriction.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>