motorola MOTO BUDS 100 Ture Wireless Earbuds User Guide
- June 6, 2024
- Motorola
Table of Contents
Model No.: MOTO BUDS 100 FCC ID: 2ARRB-VB100
Frequency Band: 2.402 – 2.480GHz IC: 20353-VB100
Maximum RF power: 6 dBm Working temperature: -10°C–45°C
Quick Start Guide
1. Charging:
Fully charge before use
The device can be powered through a micro USB from any CE compliant power
source that implement the European interface as requested by EN 301 489-52.
2. Pairing:
2.1 Ensure both buds are inside the charging case and take out both buds. The buds will flash blue and red.
2.2 Select “MOTO BUDS 100 from the smartphone bluetooth menu.
3. Fitting:
3.1 To optimize the best fit and audio experience, it is recommended to try different earbud sizes.
3.1
3.2 Insert the MOTO BUDS into your ear and rotate to fit comfortably.
3.2
4. Basic Operation:
Additional Operation
Factory reset|
- Ensure earbuds are not connected to phone
- Double press MFB and then hold MFB for 5 second until LED shows blue and red
- Put both buds into the charging case
Reject a call| MFB 2sec
Receive incoming and on hold ongoing call| Single Press MFB
LED Indicator
Pairing| Red-blue flash
Standby| Blue flash
Charging| Red steady
Fully charged| Off
Battery low| Red flash
Global V9
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>