MASTECH MS6252A Digital Anemometer User Guide
- June 6, 2024
- MASTECH
Table of Contents
Quick Start Guide
MS6252A
Digital Anemometer
700019246 MAY 2021 Rev. 1
Specifications are subject to change without notification.
Special attention should be paid when using the test and measurement
instrument because improper usage may cause electric shock and damage the
equipment.
– Use proper measurement category (CAT), voltage, and amperage rated probes,
test leads, and adapters for the measurement.
– Do not use or store the device around explosive gas, vapor, or under high
temperature and humidity.
– When handling the test probes and crocodile clips, keep your fingers behind
the physical guard.
– Examine the measuring test leads (if present) before use. Any element of
which the insulation deteriorates (even partially), replace them with proper
functional test leads.
– Connect the common test lead before the live test lead and remove the live
test lead before the common test lead.
– Before measuring current, make sure the instrument fuses available and
disconnect the power supply to the circuit test
– Remove the batteries if the device is not used for an extended period of
time, or if stored in temperatures above 45 °C. If the batteries are not
removed, battery leakage can damage the device.
Contents
Specifications
|
Range
| Resolution|
Accuracy
---|---|---|---
M/S| 0.80-30.00 m/s
30.00-40.00 m/s| 0.01 m/s
0.01 m/s| ±(2.0%+50)
Reference
km/h| 2.88-108.0 km/h
108.0-144.0km/h| 0.01 km/h
0.1 km/h| ±(2.0%+50)
Reference
ft/s| 98.5-131.2ft/s| 0.01 ft/s
0.01 ft/s| ±(2.0%+50) Reference
knots| 1.6-58.30knots 58.30-77.70knots| 0.01 knots
0.01 knots| ±(2.0%+50) Reference
mile/h| 1.8-67.20mil/h 67.20-90.00mil/h| 0.01 mil/h
0.01 mil/h| ±(2.0%+50) Reference
ft/m| 157.5-5900ft/m
5900-7874ft/m| 1 ft/m
1 ft/m| ±(2.0%+50)
Reference
|
---|---
| |
---|---|---
http://www.mastech-group.com/support.php?n=0
USA
MGL AMERICA, INC.
2810 Coliseum Centre Drive,
Ste. 100 Charlotte,
North Carolina 28217 USA
Tel: +1 833-533-5899
Email: [email protected]