MASTECH MS8900A Non Contact AC Voltage Detector User Guide
- June 6, 2024
- MASTECH
Table of Contents
MASTECH MS8900A Non Contact AC Voltage Detector User Guide
700019329 May 2021 Rev. 1
Specifications are subject to change without notification
The special attention should be paid when using the test and measurement
instrument because the improper usage may cause electric shock and damage the
equipment.
– Use proper measurement category (CAT), voltage, and amperage rated probes,
test leads, and adapters for the measurement.
– Do not use or store the device around explosive gas, vapor, or under high
temperature and humidity.
– When handling the test probes and crocodile clips, keep your fingers behind
the physical guard.
– Examine the measuring test leads (if present) before use. Any element of
which the insulation is deteriorated (even partially), replace them with
proper functional test leads.
– Connect the common test lead before the live test lead and remove the live
test lead before the common test lead.
– Before measuring current, make sure the instrument fuses available and
disconnect the power supply to the circuit test
– Remove the batteries if the device is not used for an extended period of
time, or if stored in temperatures above 45 °C. If the batteries are not
removed, battery leakage can damage the device.
Contents
Specifications
Non-Contact AC Voltage Detector (AC Votage Range) 90~1000V
Frequency
50Hz~60Hz
Read More About This Manual & Download PDF:
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>