motorola ROKR 810 Wireless Portable Party Speaker User Guide

: June 6, 2024
: Motorola

Table of Contents

motorola ROKR 810 Wireless Portable Party Speaker
INTRODUCTION
PRODUCT OVERVIEW
Power/Charging
Bluetooth Connection
USB Connection
FM Radio
EQ Mode and Bass Boost
Specification
Read User Manual Online (PDF format)
Download This Manual (PDF format)

motorola ROKR 810 Wireless Portable Party Speaker

motorola ROKR 810 Wireless Portable Party Speaker-
product

INTRODUCTION

Congratulations on your purchase! This manual includes information about “ Bluetooth Party Speaker. We encourage you to take a few minutes to read this manual, which describes the product and includes step-by-step instructions to help you to set up and get started. Read and understand all the safety instructions before using your product.

WHAT’S IN THE BOX

Main unit
USB Charging cable
Aux cable
Microphone
User manual

PRODUCT OVERVIEW

motorola ROKR 810 Wireless Portable Party Speaker-1

EQ/TWS
Power and mode(BT/FM/USB/AUX)
Light control button
Bass Boost
Echo/Mic Volume-/+
Mic/Echo switch button
Skip –
LED display
Skip+
Play/pause
Volume -/+ control
Handle
USB port.
Micro-USB DC in jack
Aux in jack
Mic 1 jack
Mic 2 jack
Speaker

Power/Charging

Connect the charging cable into the speaker’s micro-USB DC in the charging port. Connect the other end of the Charging cable to an external DC 5V/2A power source. It takes about 6-8 hours to full charge the speaker.
Press and hold the Power button 3 seconds to power on the speaker.
Press the power button 3 seconds to power off the speaker.
You can use this speaker as a battery charger for your rechargeable USB devices. Connect your USB device to the USB port on the rear of this Speaker.

The speaker is powered by a built-in rechargeable battery. After power-on, the display shows the battery level immediately, you can check the status of the Speaker battery by display.

Standby Mode
The product will enter into sleep mode after 15 minutes without operation.

If the Speaker is powered by the battery, it will auto power off if no action for 15 minutes.
If the Speaker powered by AC or DC power source, the product will enter standby(Off) mode if no action for 15 minutes.

Bluetooth Connection

You can use your Speaker “ROKR 810” as an external speaker for your Bluetooth- enabled smartphone or tablet.

Press Mode button to set Bluetooth mode (you can Press and hold the Play/Pause button to erase the previous connecting).
Choose “ROKR 810” on your mobile device to connect.
Once successfully connected, audio will stream from your Bluetooth device to this speaker.

Notes:

This speaker can memorize a maximum of 8 paired devices. The ninth paired device will replace the first one.
The operational range between this speaker and a Bluetooth device is approximately 10 meters (30 feet).
If a PIN code is requested while connecting a Bluetooth device, enter “0000”.
Bluetooth performance can be affected by the distance between this product and your Bluetooth device and the environment of operation.
To terminate the Bluetooth-enabled device:
Turn off this speaker;
Disable Bluetooth on your device;
Move this speaker beyond the Bluetooth operational range.
To reconnect the Bluetooth-enabled device:
When you turn on this speaker next time, it will reconnect to the last connected device automatically;
If not, manually select “ROKR 810” on your Bluetooth device to start a connection.

TWS Mode
Use two “ROKR 810” speakers can connect to each other in TWS mode.

motorola ROKR 810 Wireless Portable Party Speaker-4

Press and hold the TWS button of either speaker for 3 seconds, then release, TWS connection will be made with the master speaker. By default, the speaker which connected to your smartphone is the master speaker (R channel), the other one is the slave speaker (L channel).
In TWS mode, press and hold the TWS button for 3 seconds on either speaker or power off the speaker to exit the TWS mode.

USB Connection

With your Speaker, you can enjoy music that is stored on a USB storage device such as an MP3 player. Plug your USB storage device into the USB port of your Speaker. The music will play automatically. if not, Press Mode button to select USB mode and press Play/Pause on the unit. Or please check if the USB device contains playable audio contents.

FM Radio

Press Mode button to select FM radio mode.
Auto tuning : Press and hold Play/Pause button on the unit for 3 seconds until the frequency indication starts to change, then release. The unit will search and store the stations, a maximum of 30 stations can be stored.
Manual tuning : Press Skip-/+ button to manual select the desired FM frequency.
Select the stored stations: Press Play/Pause first , the display will show the stored station number, then press Skip-/+ to select the station.

AUX Connection
Press Mode button to select Aux mode. 2) Connect a 3.5mm audio cable to: the headphone or audio line-out socket of your audio device and the AUX in jack of this speaker. 3). Turn on your audio device and it starts playing.

EQ Mode and Bass Boost

Press the EQ button to scroll through the six dierent EQ settings:
Eq-1 …… Flat
Eq-2 …… Rock
Eq-3 …… Jazz
Eq-4 …… Classic
Eq-5 …… Pop
Press Bass Boost button to get the super bass sound.
If Mic 1/Mic 2 is plugged with the microphone , the EQ setting will be off. Press EQ button, the display will shows: VOCA, DUCI, EqOF .And the settings are as below:
VOCA: means Vocal Cut, if the display show VOCA, will cut the vocal of the music/radio. Then you can speak or sing with the microphone.
DUCI: means Music Ducking, if the display show DUCI, the music/radio sound will duck, when you speak via microphone. EqOF: means EQ setting off.

Light

Long Press the light button to turn on or turn off the light;
Short press for select LED mode for show different light effects (default setting LED 1): Led-1 : LED will be demo display if no music playback, if detected the music , the LED Color flash and change in synch with the music. Led-2 : Color flash and change in a fixed rhythm.