MASTECH MS6906 3 in 1 Scanner User Guide
- June 6, 2024
- MASTECH
Table of Contents
MASTECH MS6906 3 in 1 Scanner
Instructions
Special attention should be paid when using the test and measurement instrument because Improper usage may cause electric shock and damage the equipment.
- Use proper measurement category (CAT), voltage, and amperage-rated probes, test leads, and adapters for the measurement.
- Do not use or store the device around explosive gas, vapor, or under high temperature and humidity.
- When handling the test probes and crocodile clips, keep your fingers behind the physical guard.
- Examine the measuring test leads (if present) before use. Any element of which the insulation deteriorates (even partially), replace them with proper functional test leads.
- Connect the common test lead before the live test lead and remove the live test lead before the common test lead.
- Before measuring current, make sure the instrument fuses available and disconnect the power supply to the circuit test
- Remove the batteries if the device is not used for an extended period of time, or if stored in temperatures above 45 °C. If the batteries are not removed, battery leakage can damage the device.
Contents
Specifications
- Range Accuracy
- Wooden Pillar 30mm
- Metal Stud Detection Depth 30mm
- Metal Pipe Detection Depth 50mm
- AC Voltage Detection Depth(50-600V AC) 75mm
Battery
Stud (wood and metal)
Metal pipe
Voltage
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>