MASTECH MS6100 Multi-Funciton Digital Counter User Guide
- June 6, 2024
- MASTECH
Table of Contents
MASTECH MS6100 Multi-Funciton Digital Counter
USA
MGL AMERICA, INC.
2810 Coliseum Centre Drive,
Ste. 100 Charlotte,
North Carolina 28217 USA
Tel: +1 833-533-5899
Email: [email protected]
UNITED KINGDOM
MGL GROUP U.K. LIMITED
14 Weller St, London, SE1 1QU, UK
Tel: +34 985-08-18-70
Email: [email protected]
SKU Number: MS6100CBGLO
Quick Start Guide
MS6100
Multi-Function Digital Counter
1 YEAR LIMITED WARRANTY
Special attention should be paid when using the test and measurement instrument because improper usage may cause electric shock and damage the equipment.
- Use proper measurement category (CAT), voltage, and amperage-rated probes, test leads, and adapters for the measurement.
- Do not use or store the device around explosive gas, vapor, or under high temperature and humidity.
- When handling the test probes and crocodile clips, keep your fingers behind the physical guard.
- Examine the measuring test leads (if present) before use. Any element of which the insulation deteriorates (even partially), replace them with proper functional test leads.
- Connect the common test lead before the live test lead and remove the live test lead before the common test lead.
- Before measuring current, make sure the instrument fuses available and disconnect the power supply to the circuit test
- Remove the batteries if the device is not used for an extended period of time, or if stored in temperatures above 45 °C. If the batteries are not removed, battery leakage can damage the device.
Contents
Specifications
Range
Resolution
Accuracy
Frequency Measurements
Channel A 10MHz (10Hz~10MHz) 100MHz 1,10,100Hz selectable 10,100,1000Hz ±1 count ±1×10-5x frequency (month) ±1 count ±5×10-6x frequency (minute)
Channel B 1300MHz (100MHz~1300MHz) 1300MHz (100MHz~1300MHz)
Period Measurements
Channel A 0.1S~0.1μS 0.0μS
0.00μS ±1 count ±1×10-5x frequency (month) ±1
count ±5×10-6x frequency (minute)
(10Hz~10MHz) 0.000μS selectable
Total Measurements
Channel A 10Hz~10MHz 1 count input
Period Measurements
Channel A MAX Input Voltage: 250V RMS / Impedance: 1MΩ less than 35pF
Channel B MAX Input Voltage: 3V RMS / Impedance: 50Ω
Hz
Period Measurement
Total Measurement
Check
