iHOME iCVBT12 Glow Ring XL Oversized Rechargeable Vanity Speaker User Guide

June 6, 2024
iHome

iHOME iCVBT12 Glow Ring XL Oversized Rechargeable Vanity Speaker

iHOME iCVBT12 Glow Ring XL Oversized Rechargeable Vanity
Speaker

What’s In the Box

iHOME iCVBT12 Glow Ring XL Oversized Rechargeable Vanity
Speaker-1

Charging Mirror

  • Connect included AC adapter to DC jack on the back of mirror and the other end to a working wall outlet not controlled by a light switch.

iHOME iCVBT12 Glow Ring XL Oversized Rechargeable Vanity
Speaker-2

Charging Devices

The mirror MUST be connected to power for USB charging from the unit.

  • Connect the USB cable (not included) to the USB port and the other end to your device to charge.

Battery Level Indicators

Red Battery Status LED

Charging = solid red
Fully charged = off
Low Battery = flashing red (mirror is ON, not being charged)

Light Function

  • Press and hold the Light Button to adjust the lighting mode:
    Warm, Bright, or Cool

  • Press and release the Light Button to select a brightness level:
    Max/Hi/Mid/Lo/OFF

Accessories

Removable Detail Mirror
The back of the 10x magnifying detail mirror has SimpleStick™ micro-suction material for easily attaching and detaching almost anywhere on non-porous surfaces. If necessary, clean SimpleStick material with office tape.

Removable Phone Holder
The rotating phone holder has SimpleStick™ micro-suction material for easily attaching and detaching almost anywhere on non-porous surfaces. If necessary, clean SimpleStick material with office tape.

Cleaning Cloth
Use the included cleaning cloth to keep the large surface and detail mirror smudge-free.

Bluetooth Audio Function

  • Press the power button to turn the speaker On or Off

  • When the mirror is On, press and hold the Bluetooth button on back of the mirror for 2 seconds for pairing mode, indicated by the blinking Voice Button

  • Select “iHome GLOW RING XL” on your device’s Bluetooth menu to connect.
    To cancel pairing, press the Bluetooth button again
    To reset Bluetooth, press and hold the Bluetooth button for 10 seconds

  • Press to play/pause Bluetooth audio

  • Press to answer/end Bluetooth calls

  • Press and hold for 2 seconds to decline Bluetooth calls

  • Quick double press for next track

  • Quick triple press for previous track

  • Press and hold for 2 seconds and wait for the beep to activate voice control with Siri® / Google Assistant™

  • Press to lower or raise the volume
    Voice control requires an active internet connection on a connected Bluetooth device with iOS 10 and Android 4.1 and later. When activated, the speaker microphone acts as an extension of the microphone in your smartphone to make/take calls, enable you to ask Siri®/Google Assistant™ to play music, and more.

  • RESET mirror: if the operation “freezes” or the unit otherwise fails to respond properly, reset the unit by inserting the end of a paper clip or similar into the Reset Port located on the bottom of the mirror. Bluetooth settings will not be affected.

MAINTENANCE

  • Place the unit on a level surface away from sources of direct sunlight or excessive heat.
  • Protect your furniture when placing your unit on natural wood and lacquered finish. A cloth or other protective material should be placed between it and the furniture.
  • Clean your unit with a soft cloth moistened only with mild soap and water. Stronger cleaning agents such as thinner or similar materials can damage the surface of the unit.
  • This mirror comes with a cleaning cloth to keep the large surface and detail mirror smudge-free.
  • Wash the mirrors with mild soap and water as needed.
  • Micro-suction (for 10x Detail Mirror or Removable Phone Holder) – to restore suction, use water (preferably with soap), wipe off any debris, and allow to air-dry before use to restore easy attachment again.

IMPORTANT SAFETY INSTRUCTIONS

Please heed all warnings, read and follow all instructions and keep these instructions handy for future reference.

  1. Do not use this product near water.
  2. Unplug the unit and clean only with a damp cloth. Stronger cleaning agents, such as Benzene, thinner, or similar materials can damage the surface of the unit.
  3. Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.
  4. Heat – This product should be situated away from heat sources such as radiators, heat registers, stoves, or other appliances (including amplifiers) that produce heat.
  5. Only use attachments/accessories specified by the manufacturer.
  6. Unplug this product during lightning storms or when unused for long periods of time.
  7. Damage Requiring Service – This product should be serviced by qualified service personnel when:
    • The plug has been damaged.
    • Objects have fallen into or liquid has been spilled into the enclosure.
    • The unit has been exposed to rain. The unit has been dropped or the enclosure damaged.
    • The unit exhibits a marked change in performance or does not operate normally.
  8. No naked flame sources, such as lighted candles, should be placed on this product.
  9. Attention should be drawn to the environmental aspects of battery disposal.
  10. This product is suitable for use in tropical and/or moderate climates.

WARNING

  • To reduce the risk of fire or electric shock, do not expose this product to rain or moisture.
  • Do not dispose of batteries in the household trash or fire.
  • The mains plug of the power adaptor is used as the disconnect device, it shall remain readily operable.
  • Sunlight: Never place the mirror in or expose the mirror to direct sunlight. The sun’s rays can reflect to become focused and cause excessive heat and/or fire. Do not use mirror in direct sunlight as reflected sunlight could injure the eyes.
  • If the unit is to be unused for an extended period of time, such as a month or longer, charge the unit fully before storage.

FCC INFORMATION

This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment.
This device complies with Part 15 of the FCC Rules, the operation is subject to the following two conditions:

  1. This device may not cause harmful interference, and
  2. this device must accept any interference received, including interference that may cause undesired operation.
  • Warning: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

  • NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
    These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
    However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

  • Reorient or relocate the receiving antenna.

  • Increase the separation between the equipment and receiver.

  • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

  • Consult the dealer or an experienced radio/TV technician for help.
    This equipment should be installed and operated with a minimum distance of 20cm between the radiator & your body.

ISED Information
This equipment complies with IC RSS-102 radiation exposure limits set forth for an uncontrolled environment.
This device contains license-exempt transmitter(s)/receiver(s) that comply with Innovation, Science, and Economic Development Canada’s
license-exempt RSS(s). Operation is subject to the following two conditions:

  1. This device may not cause interference.
  2. This device must accept any interference, including interference that may cause undesired operation of the device.

The device complies with ISED RF exposure requirement, users can obtain Canadian information on RF exposure and compliance.
This equipment should be installed and operated with a minimum distance of 20 cm between the radiator and your body.
Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

WARRANTY

For product support information and warranty please visit:
www.ihome.com/support
© 2021 SDI Technologies, Inc. All rights reserved
Questions? Visit www.ihome.com

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals