Shenzhen E Ran Technology E02 Smart Eyewear Instructions

June 6, 2024
Shenzhen E Ran Technology

Shenzhen E Ran Technology E02 Smart Eyewear Instructions
Shenzhen E Ran Technology E02 Smart Eyewear

Power ON/OFF Instructions

Power on: please long press the button on the left and right leg for 3 seconds. Start automatically when stop charging (warning tone : power on)

  • Long press on both side for starting up.
    Power On

Power off: please long press the button on the left or right leg for 4 seconds when turn off the Bluetooth.
(warning tone : power off) ,Auto power off when charging.

  • Single long press left to right button.
    Shenzhen E Ran Technology E02 Smart Eyewear Instructions Power
On

Bluetooth Connections

  1. Turn on glasses, open the phone’s Bluetooth, and search the name of Smart eye wear, the device is connected.
  2. After successfully connecting, warning tone:connected.
  3. When the device disconnect, warning tone:disconnected.
    Bluetooth
  • During Pairing, red and blue light flash alternatively.
  • Bluetooth is paired, blue LED light flash once per 5 seconds.

Phone

  1. Short press button on the left or right leg for answering or hanging up calls.
  2. Long press button on the left or right leg for 1 second for refusing calls.
  3. The conversation from glasses to receiver, long press button on the left or right leg for 1 second.
  4. Adjust the volume during a call, double click button on the left leg to decrease speaker volume, double click button on the right leg to increase speaker volume (clicking the button not support adjusting volume during three way call).
  5. When making a call, another call coming in and transfer calls to three way, short press button on the left or right leg for 1 time.
  6. When making a call, hang up a call to answer another call, long press button on the left or right leg for 1 second.
  7. When making a call, keep one current call and reject another call, double click button on the left or right leg.
    Phone

Music

  1. Short press button on the left or right leg to play or pause music.
  2. Double clock button on the left leg to decrease the volume.
  3. Click 3 times button on the left leg to play the last music.
  4. Double clock button on the right leg to increase the volume.
  5. Click 3 times button on the right leg to play the next music.
    Music

Microphone

Standby or listening music, long press button on the left or right leg for 2 seconds to activate or deactivate the voice assistant.
Microphone

Battery

  1. When there is no activity for 5 minutes, the glasses turning itself off.
  2. During charging, the red LED long bright.
  3. When charging is completed, the light display turn off.
    Battery
  •  During charging, the red LED long bright.
  •  When  charging is completed, the light display turn off.

FCC Statement

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

  • Reorient or relocate the receiving antenna.
  • Increase the separation between the equipment and receiver.
  • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
  • Consult the dealer or an experienced radio/TV technician for help.

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

  1. This device may not cause harmful interference, and
  2. this device must accept any interference received, including interference that may cause undesired operation.

Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

Related Manuals