Hangzhou Lijiacheng Electric 4NBSU-JGF Alexa App User Guide
- June 6, 2024
- HANGZHOU LIJIACHENG ELECTRIC
Table of Contents
Lijiacheng Electric 4NBSU-JGF Alexa App
User Guide
Add device
Download 4NBSU-JGF”11
http://smartapp.tuya.com/smartlife
Please scan the QR Code, or get Smart Life downloaded from App Store or Android Market.
Register an account in 4NBSU-JGF
Open Smart Life into the account registration page, click on the upper right corner of the “Register” .
Add devices(for example, Smart Bulb)
After login to Smart LifeAPP, click on “+” .
- Smart LifeAPP supports two types of distribution network modes: EZ mode and AP mode. EZ mode is the default.
- EZ Mode: The indicator light flashes rapidly. (Two times a second)
- AP Mode: The indicator light flash slowly
Select the WiFi you are using and input the password, click “next” to connect the device.
Rename the device
After the device is added successfully, click the device description text to
modify the device name. The name of the device is recommended to use easy
pronunciation of the English words. (Amazon Echo only supports English
temporarily)
Multiple devices can be added and renamed according to the above procedures.
Enable 4NBSU-JGbkill in Alexa APP
Choose ‘Skills” in the options bar, and then search smart Life in the input
box.
Select Smart life in
the search results, and then click ‘Enable Skill’.
Then input the user name
and password that you had previously registered. Only support the account in
the United States.
Control Smart Bulb by Voice
After the above operation is successful, you can control the bulb via Echo.
Discover devices
Firstly, you need to say to Echo:
Echo(or Alexa), discover my devices. Echo will start to find the devices which
is added in Smart Life APP, which will take about 20 seconds, then it will
tell you the result.
You can also click “Discover devices’ in Alexa APR then it will show the
devices that found successfully.
Control devices by voice
Attention: The name of the device must be consistent with the addition of the
Smart Life app.
You can also group the bulbs and give instructions to control them together.
Attention:
Echo is one of the wake-up names, which can be any of these three
names(Settings) Alexa, Echo, Amazon
Support Skill list
You can control devices by instructions like these:
Alexa(or echo), turn on [bedroom light] Alexa(or echo), turn off [bedroom
light] **Alexa(or echo), set [bedroom light] to 50 percent
Alexa(or echo), increase [bedroom light] to 50 percent .
** Alexa(or echo), decrease [bedroom light] to 50 percent
Alexa(or echo), set [smart heater] to 34 .
Alexa(or echo), raise [smart heater] by 4
Alexa(or echo), lower [smart heater] by 2
Bluetooth function operation instructions
Please connect the bulb to the power,
turn on-off-on-off-on-off-on and then the bulb will flash and enter the state
and network match.
Connect the phone to wifi and turn on the Bluetooth, ensure that the phone
network is smooth
After opening and
logging in to the “SmartLife” APP “click the “Add button, the dual-mode bulb
lamp will automatically pop up the connection window, click “Connect”, after
it is successful, the smart control can be realized, and the smart bulb lamp
can be controlled
through the mobile phone APP.
“click the “Add button, the dual-mode bulb lamp will After opening and logging in to the “SmartLife” APP, click the “Add button, the dual-mode bulb lamp will automatically pop up the connection window, click “Connect”, after it is successful, the smart control can be realized, and the smart bulb lamp can be controlled through the mobile phone APP.
FCC Caution:
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20cm between the radiator & your body.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>