Shenzhen Digtec Technology DT-G5 Qi Universal RGB Wireless Charging Stand User Manual
- June 6, 2024
- Shenzhen Digtec Technology
Table of Contents
USER MANUAL
Qi Universal RGB Wireless Charging Stand
Product Specification
Model NO: DT- G5
Features:
| Function: | Wireless Charging with RGB Lighting |
|---|---|
| Interface: | Type-C |
| Input Voltage: | 5V/9V/12V |
| Input Current: | 2A/2.2A |
| Output Power: | 15W/10W/7.5W |
| Dimensions: | 124.82 x 106.33 x 75mm |
Production Show
19c x Wireless Charger
1pc x User Manual
How to Work
- Plug the USB charger into a wall outlet, connect the USB cable to the USB charger, then place your phone on the charging Stand to start charging.
- Place a mobile phone on the charger. Check the charging icon displayed on the mobile phone’s screen for the charging status.
Indicator light identification:
| Color of light | Working status |
|---|---|
| White | Connected to a power outlet |
| White | Charging |
| White | Full charged |
| Flashing White | 1. Not charging properly due to a general error |
2. Low power input (less than 5V/2A)
Charging Mode
- The hidden silicones can be manually adjusted front and back, it helps with changing charging mode.
- Short press the button, chance RGB light.
Long press it, switch RGB light off.
Product-specific safety information
Race the c vice on a flat surface.
Keep the device dry.
Do not attempt to open the device.
Do not place bank cards near the device.
No Total on the back of the phone when charging.
FCC Warning
This device complies with parts 15 and Part 18 of the FCC Rules. Operation is
subject to the following two conditions.
- This device may not cause harmful interference
- This device must accept any interference received, including interference that may cause undesired operation
Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more
of the following measures:
– Reorient or relocate the receiving antenna.
– Increase the separation between the equipment and receiver.
– Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
– Consult the dealer or an experienced radio/TV technician for help
The device has been evaluated to meet general RF exposure requirements. The device can be used in portable exposure conditions without restriction.
FCC RF exposure statement:
The equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. During the operation of the device, a distance of 15
cm surrounding the device and 20 cm above the top surface of the device must
be respected.
FCC ID: 2AVI4-DT-G5
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>