PANDO EF919B4 Smart Body Composition Scale User Guide

PANDO EF919B4 Smart Body Composition Scale

Tip: Do not pair the scale from your smartphone’s Bluetooth menu. Use the Pando app to pair the scale with your smartphone. The scale will automatically connect to the app and the Bluetooth icon will appear on the display.

Usage Guide

1. Open the Pando app, and enable Bluetooth on your phone when prompted.
2. Make sure that your feet are clean and dry. Place the scale on hard and flat ground for the accurate readings
3. Gently step onto the scale in an upright standing position.Your scale will firstly measure your weight and will blink three times before displaying the percentage and your heart rate.
4. After the measurement is completed, all results are sent to the app together. User can check the histories on the app.

Display Icons

1. Measuring body fat

2. Low power
   (Need to insert new battery)

3. Measure Abnowmally
   (Step down and try to weigh again)

4. The app is not connected to the device

5. Unable lo identify
   (Please make sure your feet are clean and dry)

6. Overweight

7. initialize

You can see the button unit on the back of the scale and press it to change the unit. kg/lb unit is available.

Download App

Caution

• Not intended for use by children under 16.
• Do not use this device if you are pregnant.
• Do not use this device if you are wearing a pacemaker or any other internal medical devices.

What’s Needed

1. Compatible smartphone
   • iOS 8.0 or above
   • Android 4.3 or above
2. Install the 3xAAA battery to power on the scale

Installing App and Pairing Devices

1. Search for Pando in App Store or Google Play and install it.
2. Register an account according to the prompts on the app and log in. Make sure your basic information such as gender, date of birth , height are correct at the time of sign up as this information impacts the accuracy of the health and fitness data.
3. Enable the Bluetooth of your mobile phone.Gently step on the scale with one foot. The screen will light and the Bluetooth icon will flash, indicating that the scale is activated.Then the app will find the nearby scale that has been activated. Click on the scale found and Pair.
4. After successful connection of mobile phone and app, the Bluetooth icon of the scale will stay on and the Bluetooth icon on the app will turn blue. Next time when you turn on the Bluetooth, the app and light the scale, they will automatically connect.

BATTERY REPLACEMENT

In the event that the scale batteries need to be replaced (display shows “Lo”), remove the battery cover. Replace the old batteries with 3 new AAA alkaline batteries. Clean the battery contacts and also those of the device prior to battery installation. Ensure the batteries are installed correctly with regard to polarity,and the supply terminals are not to be short- circuited,then replace the battery cover. Remove used batteries promptly. Dispose of the old batteries as per legal regulations. Do not attempt to open the scale or to remove any components. Servicing should be done by qualified technicians only.

FCC Statement

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>