Acrox Technologies KS0+MQZ 2.4G-BT Wireless Keyboard Instruction Manual

June 6, 2024
Acrox Technologies

Acrox Technologies KS0+MQZ 2.4G-BT Wireless Keyboard Instruction Manual
Acrox Technologies KS0+MQZ 2.4G-BT Wireless Keyboard

wireless keyboard

wireless keyboard

connection channel for

wireless USB receiver
Bluetooth channel 1
Bluetooth channel 2

wireless keyboard

included

  • Wireless Keyboard (connect via wirelesss USB receiver or Bluetooth)
  • USB receiver
  • 2 x AAA battery

detailed setup

  • This keyboard can be paired with up to 3 different devices
    Use “ ” keys to change channel from wireless USB receiver channel and 2 other Bluetooth channels
    detailed setup

  • Short press “  ” keys ONCE will let you switch from each channel
    For example, will set this keyboard on “wireless USB receiver”, and its LED indicator will flash in green 3 ~ 5 seconds, will set it on “Bluetooth channel 1”, its LED will also flash in green for 3 ~ 5 seconds

connect via wireless USB receiver

It is plug and play for USB receiver, make sure power is on, channel is set and then just plug in USB receiver into available USB A port on device

Trouble shooting

If it is not working, try below steps to re-pair keyboard and USB receiver

  1. Turn off your keyboard and re-plug in USB receiver, turn on power (make sure channel is set on )
  2. Press and HOLD “ ” key (keep keyboard close to receiver)
  3. If it does not work after 10 seconds, repeat step 1 to 3

connect via Bluetooth on PC

  1. Turn on your keyboard and set it on either Bluetooth channel or
  2. Click on Start Menu (bottom left corner of your screen)
  3. Go to Settings -> Device -> Bluetooth & other devices
  4. Turn on Bluetooth -> Add Bluetooth or other device -> Add a device (Bluetooth)
  5. Press and HOLD “ or ” key to set keyboard in discoverable mode so that it can be seen by your device (LED will start flashing fast in green)
  6. Click on “heyday keyboard” to connect (LED will stop flashing and light up in green for 3 seconds when pairing is completed)

connect via Bluetooth in iOS

  1. Turn on your keyboard and set it on either Bluetooth channel or
  2. Click on Apple menu (top left corner of your screen) Go to System Preferences -> Bluetooth -> Turn Bluetooth on to set up Bluetooth device
  3. Press and HOLD “ or ” key to set keyboard in discoverable mode so that it can be seen by you device (LED will start flashing fast in green)
  4. Click on “heyday keyboard” to connect (LED will stop flashing and light up in green for 3 seconds when pairing is completed)

Trouble shooting

If it is not working, try below steps to re setup

  1. Turn off your mouse and turn on power again (make sure channel is set on or )
  2. Make sure to turn on Blueooth on your device
  3. Press and HOLD “ or ” key to set keyboard in pairing mode, make sure it is discoverable on your device and connect with your keyboard
  4. If it does not work after 10 seconds, repeat step 1 to 3

If it is not working on previous paired devices, make sure to turn on Bluetooth on that device and set keyboard on correct Bluetooth channel

For example, a tablet has paired with , and a laptop has paired with   Set keyboard on if you want to use keyboard on that tablet

low battery

If this LED starts blinking, it means you need to change battery

low battery

Function keys

Press F1 ~ F12| Press and hold Fn + F1 ~ F12| Press F1 ~ F12| Press and hold Fn + F1 ~ F12
---|---|---|---
| Decrease display brightness| F1| | Switch to previous media track| F7
| Iecrease display brightness| F2| | Play media or pause current media track| F8
| Open Windows Search| F3| | Switch to next media track| F9
| Mutes (turns off) the computer’s sound| F4| | Switch to Bluetooth channel 1 / device 1| F10
| Decrease the computer’s volume| F5| | Switch to Bluetooth channel 2 / device 2| F11
| Increase the computer’s volume| F6| | Switch to wireless USB receiver channel / device| F12

need some help?

Can’t get it to pair? Just have a question?


call us at:
877-698-4883


online at:
TargetTechSupport.com

safety

  • Do not use near any water source
  • Do not modify or repair this device
  • Do not use in high temperatures or extreme weather
  • Do not use chemical detergents to clean your device, use a soft dry cloth

FCC ID: PRDKB50
Model: KS0 MC:XXXXX
Input: XXXV XXX mA Made in Chhina

FCC Statement

This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions:

  1. this device may not cause harmful interference, and
  2. this device must accept interference received, including interference that may cause undesired operation.

Warning: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.

However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

  • Reorient or relocate the receiving antenna.
  • Increase the separation between the equipment and receiver.
  • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
  • Consult the dealer or an experienced radio/TV technician for help.

Target Corp. Mpls. MN, 55403 Phone: 877-698-4883

Radiation Exposure Statement:

The product comply with the FCC portable RF exposure limit set forth for an uncontrolled environment and are safe for intended operation as described in this manual. The further RF exposure reduction can be achieved if the product can be kept as far as possible from the user body or set the device to lower output power if such function is available.

FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate this equipment.

NOTE: Do not mix old and new batteries and do not mix alkaline, standard (zinc-carbon) or rechargeable (nicad, NiMH, etc.) batteries.

Battery life may vary depending on user and computing conditions.

The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by TargetCorp. is under license. Other trademarks and trade names are those of their respective owners.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals