Acrox Technologies MU106 Wireless Multimedia Keyboard and Mouse with Nano Receiver User Guide
- June 6, 2024
- Acrox Technologies
Table of Contents
Acrox Technologies MU106 Wireless Multimedia Keyboard and Mouse with Nano
Receiver
Functional Introduction
Mouse Buttons
- Left Button
- Battery Cover
- Right Button
- Connect Button
- Scrolling Wheel
- ON/OFF Switch
- LED Indicator
- Nano Receiver
Keyboard Buttons
*Key Function ( compound key, Press with Fn key)**
1.| | Media Player On| Turn on the Media player program
2| | Volume down (Voice-)| Decrease the computer’s sound volume.
3.| | Volume up (Voice+)| Increase the computer’s sound volume.
4.| | Mute| Mute (turns off) the computer’s sound
5.| | Previous| Switch to the previous media track
6.| | Next| Switch to the next media track
7.| | Play/Pause| Switch between playing and pausing media
8.| | Stop(Media)| Stop playing the media in the media player
9.| | Homepage(www/e)| Start the default Web browser and loads the home Web
page
10.| | Outlook(E-mail)àDefault| Start the default e-mail program
11.| | My Computer| Open My Computer/This PC folder.
12.| | My Favorites| Open My Favorites folder within Internet browser
application
| | Number Lock Indicator
---|---|---
| Caps Lock Indicator
| Low Battery & Pairing Indicator
14.| Battery Cover
Fn +| HOME
---|---
Fn +| END
Fn +| Pg UP
Fn +| Pg DN
HIKVISION-DS-PDTPH-E-WB-Wireless-Temperature-Detector-
FEATURED
Step 3: Replace the cover.
Step 4: Turn on power switch.
Warning:
Please insert the battery with the correct position according to the
instruction labeled on the mouse & Keyboard.
Setup the Connection between the Receiver and the Mouse & Keyboard
-
Remove the cover under the mouse & keyboard to access the battery and nano receiver compartment.
-
Insert batteries into the mouse & keyboard, and remove the nano receiver from the compartment. Place the covers back onto the devices.
-
Plug the nano receiver into a USB port on your computer.
-
If the device does not work, please turn it into pairing mode.
-
Pairing: Re-plug the receiver into the USB port on your computer, then press connect button of the mouse, and press they key combination
“ESC + K “ on the keyboard. If the mouse or keyboard does not work after 10 seconds, pair them again. -
The LED indicator on the mouse & Keyboard flashes steadily when it is in pairing mode and stops blinking when it is successfully paired with the receiver.
-
When the device has low battery, the battery indicator on the keyboard or the mouse will start to blink.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>