RESMED Swift FX Bella Nasal Pillows System User Guide
- June 6, 2024
- ResMed
Table of Contents
Fitting Guide
| 
---|---
ResMed Swift FX Bella Nasal Pillows System• Hold the pillows at your nose,
ensuring the ResMed logo is at the top. Pull one strap around and behind your
ear.| • Ensure that the strap lies flat and comfortably across the ear. Take
care to avoid
twisting the strap.
| 
• Repeat the same process with the other strap.| • Adjust the mask’s fit by
pulling both of the upper straps at the same time, along the notches until you
get a comfortable fit.
| 
• Repeat the process on the mask’s lower straps. Do not overtighten.| • Check
that the pillows are upright at the entrance to the nose, then connect the
free end of the short tube assembly to the air tubing of your device. Now it’s
ready for use.
Swift™ FX Bella
NASAL PILLOWS SYSTEM
ResMed Pty Ltd
1 Elizabeth Macarthur Drive
Bella Vista NSW 2153 Australia
Distributed by: ResMed Corp 9001 Spectrum Center Boulevard San Diego CA
92123 USA. 
ResMed (UK) Ltd 96 Milton Park Abingdon Oxfordshire OX14 4RY UK. See
www.resmed.com for other ResMed locations worldwide.
Swift is a trademark of ResMed Pty Ltd and is registered in U.S. Patent and
Trademark Office. © 2011 ResMed. Specifications may change without notice.
1015126/1 2011-12
0123
Global leaders in sleep and respiratory medicine www.resmed.com
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>