EZVIZ BC1-B1 Wi-Fi Camera Kit 2MP 2.8mm (108°) Battery-Powered User Manual

EZVIZ BC1-B1 Wi-Fi Camera Kit 2MP 2.8mm (108°) Battery-Powered

COPYRIGHT © Hangzhou EZVIZ Software Co., Ltd. ALL RIGHTS RESERVED. Any and all information, including, among others, wordings, pictures, graphs are the properties of Hangzhou EZVIZ Software Co., Ltd. (hereinafter referred to as “EZVIZ”). This user manual (hereinafter referred to as “the Manual”) cannot be reproduced, changed, translated, or distributed, partially or wholly, by any means, without the prior written permission of EZVIZ. Unless otherwise stipulated, EZVIZ does not make any warranties, guarantees or representations, express or implied, regarding to the Manual.

About this Manual
The Manual includes instructions for using and managing the product. Pictures, charts, images and all other information hereinafter are for description and explanation only. The information contained in the Manual is subject to change, without notice, due to firmware updates or other reasons.

Please find the latest version in the EZVIZ website http://www.ezvizlife.com

Revision Record
New release – January, 2021

Trademarks Acknowledgement
EZVIZ and other EZVIZ’s trademarks and logos are the properties of EZVIZ in various jurisdictions. Other trademarks and logos mentioned below are the properties of their respective owners.

Legal Disclaimer
TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, THE PRODUCT DESCRIBED, WITH ITS HARDWARE, SOFTWARE AND FIRMWARE, IS PROVIDED “AS IS”, WITH ALL FAULTS AND ERRORS, AND EZVIZ MAKES NO WARRANTIES, EXPRESS OR IMPLIED, INCLUDING WITHOUT LIMITATION, MERCHANTABILITY, SATISFACTORY QUALITY, FITNESS FOR A PARTICULAR PURPOSE, AND
NON-INFRINGEMENT OF THIRD PARTY.

IN NO EVENT WILL EZVIZ, ITS DIRECTORS, OFFICERS, EMPLOYEES, OR AGENTS BE LIABLE TO YOU FOR ANY SPECIAL, CONSEQUENTIAL, INCIDENTAL, OR INDIRECT DAMAGES, INCLUDING, AMONG OTHERS, DAMAGES FOR LOSS OF BUSINESS PROFITS, BUSINESS INTERRUPTION, OR LOSS OF DATA OR DOCUMENTATION, IN CONNECTION WITH THE USE OF THIS PRODUCT, EVEN IF EZVIZ HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.
TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, IN NO EVENT SHALL EZVIZ’S TOTAL LIABILITY FOR ALL DAMAGES EXCEED THE ORIGINAL PURCHASE PRICE OF THE PRODUCT.

EZVIZ DOES NOT UNDERTAKE ANY LIABILITY FOR PERSONAL INJURY OR PROPERTY DAMAGE AS THE RESULT OF PRODUCT INTERRUPTION OR SERVICE TERMINATION CAUSED BY:

• A) IMPROPER INSTALLATION OR USAGE OTHER THAN AS REQUESTED;
• B) THE PROTECTION OF NATIONAL OR PUBLIC INTERESTS;
• C) FORCE MAJEURE;
• D) YOURSELF OR THE THIRD PARTY, INCLUDING WITHOUT LIMITATION, USING ANY THIRD PARTY’S PRODUCTS, SOFTWARE, APPLICATIONS, AND AMONG OTHERS.

REGARDING TO THE PRODUCT WITH INTERNET ACCESS, THE USE OF PRODUCT SHALL BE WHOLLY AT YOUR OWN RISKS. EZVIZ SHALL NOT TAKE ANY RESPONSIBILITES FOR ABNORMAL OPERATION, PRIVACY LEAKAGE OR OTHER DAMAGES RESULTING FROM CYBER ATTACK, HACKER ATTACK, VIRUS INSPECTION, OR OTHER INTERNET SECURITY RISKS; HOWEVER, EZVIZ WILL PROVIDE TIMELY TECHNICAL SUPPORT IF REQUIRED. SURVEILLANCE LAWS AND DATA PROTECTION LAWS VARY BY JURISDICTION.

Box Contents

NOTE: You can also purchase camera seperately as needed.

Basics

Camera

Name

• SYNC Button

Description

•   Power on: Hold for 2 seconds in shut-down state.
• Reset and get ready for pairing: Hold for 2 seconds.
• Power off: Press the button three times within one second.

Name

• Power Port

Description

• For charging the camera.

Name

• LED Indicator

Description

• Solid Blue: Camera starting up or being live viewed in the EZVIZ app.
• Fast-flashing Blue: Camera ready for pairing./Pairing in progress.
• Slow-flashing Red: Network exception.
• Fast-flashing Red: Camera exception.
• Solid Green: Camera fully charged.
• Slow-flashing Green: Charging.

Base Station

Name

• LED Indicator

Description

• Solid Green: The base station works properly.
• Solid Blue: The base station is not connected to the Internet.
• Flashing Blue: The base station is pairing with the camera.
• Solid White: Restore factory settings successfully.
• Flashing Red: An alarm occurs.
• Solid Red: SD card error.

Name

• SYNC Button

Description

• Short press to turn off the siren when an alarm occurs.
• Hold for 2 seconds to start pairing with the camera (Pairing can last up to 2 minutes).

Name

• Power Button

Description

• Press to connect or cut off power.

Name

• Network Indicator

Description

• Solid Green: The Ethernet cable is connected.

Name

• Reset Button

Description

• Hold for 5 seconds to restart and reset all parameters to default.

Setup

Step 1: Charge the Camera (Optional)
Connect the camera to power outlet with the power adapter (5V 2A). If the camera is powered off, short press the SYNC button to power on.

CAUTION:

•  Remove the camera from the wall before charging.
• Please do not charge the camera when the temperature exceeds 45 degrees or below 0 degrees.
• It is not allowed to charge the camera with power adapter outdoors.
• When charging, the camera will automatically turn on.

Step 2: Power on the Base Station
Connect the base station to power outlet with the power adapter (12V 1A).

  Step 3: Connect the Base Station to the Internet
Connect the base station to an open LAN port on your router with Ethernet cable.

CAUTION: Please make sure the router can access the Internet.

Step 4: Get the EZVIZ app

1. Connect your mobile phone to the Internet.
2. Search for EZVIZ in the App Store or Google PlayTM.
3. Download and install the EZVIZ app.
4. Launch the app and register an EZVIZ user account.

Step 5: Add the Base Station to Your EZVIZ Account

1. Login to the EZVIZ App.

2. On the Home screen, tap “+” on the upper-right corner to go to the scan QR code interface.
   

3. Scan the QR code on bottom of the base station or manually enter the serial number to add the base station.

4. Follow the EZVIZ app wizard to finish network configuration of the base station.

5. When the base station is added to your EZVIZ account successfully, tap “Next” button to link camera(s) to your base station.

Step 6: Pair Base Station with Camera(s)

1. Press and hold the SYNC button on the base station for 2 seconds. The LED indicator will flash blue.
   

2. Place the camera 1 to 3 ft (30 to100 cm) from the base station. Press and hold the SYNC button on the camera for 2 seconds. The LED indicator will fast flash blue.
   

3. Wait for about 120 seconds, and tap to refresh the current page.
   CAUTION:
   • The camera LED indicator slow-flashing red indicates the pairing has failed, and you can repeat above steps to try again.
   • You can pair up to 4 cameras with each base station at the same time.

Camera Installation

Installation Location
Choose a location with a clear, unblocked field of view and with a good wireless signal to the base station. Please keep the following tips in mind:

• Make sure the wall is strong enough to withstand three times the weight of the camera.

• Camera cannot be installed in front of an air conditioner or facing direct sunlight.

• Recommended installation height: 7-10 ft (2-3 m) above the ground.
  

• Make sure that side-to-side traffic crosses camera’s field of view. The camera’s motion sensor is much more sensitive to side-to-side movement across its field of view than to movement directly toward or away from the camera.
  

• It is recommended to set detection sensitivity on EZVIZ app when selecting location. Thus you can verify if motion can be detected in the camera’s placement and adjust the sensitivity based on the size and distance of detected object

Installation Steps

• Step 1 Place drill template onto a clean and flat surface .
• Step 2 (For the cement wall only) Drill screw holes according to the template, and insert anchors.
• Step 3 Use screws to fix the mounting plate according to the template.
• Step 4 Rotate the magnetic base (Fig.1) or screw base (Fig.2) to the mouting plate.
• Step 5 Mount the camera to the base.
  

Regulatory Information

This product and – if applicable – the supplied accessories too are marked with “CE” and comply therefore with the applicable harmonized European standards listed under the Radio Equipment Directive

2014/53/EU, the EMC Directive 2014/30/EU, the RoHS Directive 2011/65/EU.
2012/19/EU (WEEE directive): Products marked with this symbol cannot be disposed of as unsorted municipal waste in the European Union. For proper recycling, return this product to your local supplier upon the purchase of equivalent new equipment, or dispose of it at designated collection points. For more information see: www.recyclethis.info

2006/66/EC and its amendment 2013/56/EU (battery directive): This product contains a battery that cannot be disposed of as unsorted municipal waste in the European Union. See the product documentation for specific battery information. The battery is marked with this symbol, which may include lettering to indicate cadmium (Cd), lead (Pb), or mercury (Hg). For proper recycling, return the battery to your supplier or to a designated collection point. For more information see: www.recyclethis.info

EC DECLARATION OF CONFORMITY
Hereby, Hangzhou EZVIZ Software Co., Ltd. declares that the radio equipment type [CS-C1C, CS-C1HC, CS-C1T, CS-C2C, CS-CV206, CS-CV310, CS-C3N, CS-C3W, CS- C3WN, CS-C3X, CS-C6N, CS-CV246, CS-CV248, CS-C6CN, CS-C6C, CS-C6W, CS-TY1, CS- TY2, CS-TY3, CS-CV336, CS-DP1, CS-DP1C, CS-DP2C, CS-DB2C, CS-C4W, CS-C4C, CS- CV228, CS-C5W, CS-C5C, CS-C5HC, CS-C5X, CS-C5HX, CS-C8W, CS-C8C, CS-CP1, CS- C3A, CS-BC1, CS-BC1-B1, CS-BC1-B2, CS-BC1-B3, CS-BC1-B4, CS-BC1C, CS-W2H, CS- X5S-4W, CS-X5S-8W, CS-A1-32W, CS-T9-A, CS-T4-A] is in compliance with Directive 2014/53/EU. The full text of the EC DECLARATION OF CONFORMITY is available at the following web link:
http://www.ezvizlife.com/declaration-of-conformity
Use only power supplies listed in the Table.

05050EPCU/EPC(US),
CS-C2C/ CS-CV206/| ADS-5RH-06 05050EPB(UK),
CS-CV246/CS-C6N/  CS-C6CN/| ADS-5RH-06 05050EPG(EU),
CS-C6C/ CS-TY1/ CS-TY2/| ADS-5RH-06 05050EPSA(AU),
CS-TY3/ CS-W2D/ CS-A1-32W/| ADS-5RH-06 05050EPBR(BR),
CS-T9-A/ CS-BC1C/ CS-CP1| ADS-5RH-06 05050EPI(IN),
ADS-5MA-06A 05050GPK(KR)
Sichuan Jiuzhou Electronic Technology Co., Ltd| DYS05100CP-U, DYS05100CP-E
CS-CV248/ CS-C6W/ CS-C6Wi/| Shenzhen Honor Electronic Co Ltd| ADS-10LA-06 05010EPCU/EPC(US),
CS-CV336/ CS-DP1/ CS-DP1C/| ADS-10RH-06 05010EPB (UK),
CS-DP2C/ CS-C3A/ CS-BC1/| ADS-10RH-06 05010EPG(EU),
CS-CP1| ADS-10RH-06 05010EPSA(SA),
ADS-10RH-06 05010EPBR(BR),
ADS-10RH-06 05010EPI(IN),
ADS-12CG-06 05010EPC(JP)
Sichuan Jiuzhou Electronic Technology Co., Ltd| DYS05200CQ-U, DYS05200CQ-E
CS-CV310/ CS-C3N/ CS-C3W/| Shenzhen Honor Electronic Co Ltd| ADS-12FG-12N 12012EPCU(US),
CS-C3WN/ CS-C3X/ CS-SD1/| ADS-12FG-12N 12012EPB(UK),
CS-C4W/ CS-C4C/ CS-CV228/| ADS-12FG-12N 12012EPG(EU),
CS-C8W/ CS-C8C/ CS-W2H/| ADS-12FB-12 12012EPSA(AU),
CS-W3C-WD1200G/  CS-T8-B| ADS-12FG-12N 12012EPBR(BR),
ADS-12FG-12N 12012EPI(IN)
CS-X5S-4W/ CS-X5S-8W/| Moso Power Supply Technology Co. Ltd| MSA-C1500IC12.0 -18P-GB(UK),
CS-X5S-16H| MSA-C1500IC12.0-18P-DE,
MSA-C1500IC12.0-18P-AU(AU),
MSA-C1500IC12.0-18P-BR(BR),
ADS-25FSG-12 12018GPI(IN)

Important Safety Information

• Note: Please read the manual before using the device.
• Caution : Be sure to read these instructions before operating the equipment.
• Warning : To reduce the risk of personal injury due to overheating of the components, wait until the surface cools down before touching it.
• Warning : The separate earthing terminal must be permanently connected to earth.
• Warning : For SELV DC input: the DC power source shall comply with the Safety Extra-Low Voltage (SELV) requirements of IEC 60950-1.
• Caution : Do not block ventilation openings while the system is on, and keep at least 2 cm distance from ventilation openings and walls or other things which may block the openings.
• Warning : Disposal of a battery into fire or a hot oven, or mechanically crushing or cutting of a battery that can result in an explosion.
• Warning: Leaving a battery in an extremely high temperature surrounding environment that can result in an explosion or the leakage of flammable liquid or gas.
• Warning : A battery subjected to extremely low air pressure that may result in an explosion or the leakage of flammable liquid or gas.
• Warning : Dispose of used batteries according to the instructions.
• Warning : Replace only with the same or equivalent type recommended by the manufacturer.
• Caution : THE PRODUCT IS BUILT IN A REPLACEABLE BATTERY.
• Warning : Do not ingest battery, Chemical Burn Hazard.
• Caution : This product contains a coin/button cell battery. If the coin / button cell battery is swallowed, it can cause severe internal burns in just 2 hours and can lead to death.
• Caution : Keep new and used batteries away from children.
• Caution : If the battery compartment does not close securely, stop using the product and keep it away from children. Caution: If you think batteries might have been swallowed or placed inside any part of the body, seek immediate medical attention.
• Caution : Risk of fire or explosion if the battery is replaced by an incorrect type.

FCC Information

Please take attention that changes or modification not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
FCC compliance
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.

However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

This equipment should be installed and operated with a minimum distance 20cm between the radiator and your body.

FCC Conditions

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference.
2. This device must accept any interference received, including interference that may cause undesired operation.

Industry Canada ICES-003 Compliance
This device meets the CAN ICES-3 (B)/NMB-3(B) standards requirements.
This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions:

1.  this device may not cause interference, and
2. this device must accept any interference, including interference that may cause undesired operation of the device. Under Industry Canada regulations, this radio transmitter may only operate using an antenna of a type and maximum (or lesser) gain approved for the transmitter by Industry Canada. To reduce potential radio interference to other users, the antenna type and its gain should be so chosen that the equivalent isotropically radiated power (e.i.r.p.) is not more than that necessary for successful communication.

This equipment should be installed and operated with a minimum distance 20cm between the radiator and your body.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>