Shenzhen Holatek H79P Smart Projector Instruction Manual
- June 6, 2024
- Shenzhen Holatek
Table of Contents
Shenzhen Holatek H79P Smart Projector Instruction Manual
Announcement
JMGO is committed to continuously improving both product performance and
functionality. The images and function descriptions in the product manual are
subject to product and factory presents. JMGO reserves the right to improve
the functionality and human-machine interface (HMI) outlined in this manual
without prior notice. The actual product should take precedence.
Take care of the product in a proper manner. JMGO is not responsible for any losses caused by the improper operation of software, hardware, or maintenance, nor any losses resulting from the disclosure of personal information to a third party. JMGO is not responsible for any accidental losses that may occur during the use of this manual, nor will it be responsible for any third-party claims arising from the use of this product.
The function descriptions of this product have been carefully reviewed and proofread by JMGO personnel. If you notice any omissions, we apologize and would appreciate it if you could point them out to us. The software of this product will be continuously improved and updated to unlock more functionality. There may be differences between the functions of the purchased product and the instructions herein. Please scan the QR code to download the latest version of this product manual.
To learn more about JMGO’s products and value-added services, visit our official website at www.jmgo.com.
FCC Warnings
Changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment. This
device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference
that may cause undesired operation.
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated at least 20cm between the radiator & your body. This transmitter must not be co- located or operating in conjunction with any other antenna or transmitter.
IC Warnings
This device contains license-exempt transmitter(s)/receiver(s) that comply
with Innovation, Science and Economic Development Canada’s license-exempt
RSS(s). Operation is subject to the following two conditions:
(1) This device may not cause interference.
(2) This device must accept any interference, including interference that may
cause undesired operation of the device.
The device meets the exemption from the routine evaluation limits in section 2.5 of RSS 102 and compliance with RSS-102 RF exposure. Users can obtain Canadian information on RF exposure and compliance.
This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. This equipment should be installed and operated with a minimum distance of 20 centimetres between the radiator and your body.
Safety Warning
Read this product manual thoroughly before attempting to use this product.
Store the product manual in a safe location so it may be referenced at any
time.
The product can be powered on and off by plugging and unplugging the power
cord. The socket should be located near the product and easily accessible.
Do not block the air inlet or outlet of the product with any objects when it
is projecting an image. Doing so may result in excessive internal temperatures
and damage to the projector.
Do not hit or drop the product from a significant height.
If you encounter an issue with the product, do not attempt to disassemble it
without authorization. Contact professional after-sales personnel to resolve
the issue.
If you need to perform repairs on the product, wear a laser face shield with
an OD (optical density) of 4 and a wavelength range of 440-660nm.
PARAMETERS
Dear Customer:
Thank you for purchasing this JMGO product! The JMGO Smart Theater utilizes
high-def projection solutions, smart ICs, and advanced audio technologies to
deliver a crisp, detailed, beautiful, and giant screen audio-visual experience
at any time, from anywhere. The product is designed with portability and home
theater applications in mind.
Chairman:
Scope of Delivery
*Note: Thank you very much for purchasing this JMGO product. Please check the items received against those listed on the scope of delivery. If the items received are not the same as the scope of delivery, please contact JMGO customer service as soon as possible.
Projector Appearance and Functions
Supported Devices
- TV Stick
- USB
- Hard Disk
- Game Console
- Microphone (JMGO only)
- Set-top box
- Speaker
- Xbox
- Switch
- PlayStation
Projection Distance and Image Size
The size of projector images can be affected by the distance between the
product lens and the screen, the scale setting and the video format.
This projection area is in direct proportion to the projector distance: the longer the projection distance is, the larger the projection area will be, but the corresponding display sharpness will also be reduced. You can choose a suitable projection distance based on the actual condition.
Primary System Functions
1. Source Signal
Once a source is connected, select the corresponding button on the homepage to enter the external source. You can also select a source from Settings > Source, or by pressing the Source button on the remote control.
2. Settings
You can enter the settings panel by selecting the Settings button from the
bottom of the homepage, or by pressing the Settings button on the remote
control.
1) System Update
You can check or update the system version from Settings > System > Update
Version. This product supports both online and local updates.
Online Update: Head to Settings > System > Update Version. The system will automatically detect if your software is up-to-date. You will receive a prompt if the software is already the latest version. If your software is out-of- date, you will be asked if you wish to update it.
Local Update: Download the software update package from the JMGO website, copy the file to the root directory of a hard disk or USB, then insert the hard disk or USB into the USB port on the projector body. Head to Settings > System
Update Version, then select Local Update. The system will automatically detect and install the update package.
2) Network Settings
This product supports both wired and Wi-Fi networking.
- a) To use a wired connection, simply insert the network cable directly into the projector.
- b) To connect to Wi-Fi, go to Settings > Network/Bluetooth, then select an available network to connect. After you’ve successfully connected, a Wi-Fi icon will be displayed on the upper right corner of the screen.
3) Audio Settings
Settings > Audio > Audio Modes The product includes 4 different audio modes.
These are Standard, Music, Film, and Sports. You can select the mode that best
suits your preference.
4) USB Storage Devices
This product can automatically identify USB storage devices. After inserting a
USB device, simply follow the system prompts.
This product also supports manual switching between video sources. To switch
to another video source, select Settings > Source > Local/HDMI. Alternatively,
return to the homepage and select the corresponding source button to enter an
external source.
5) Brightness
Users can adjust the brightness of the projector lens manually or through the
Smart Brightness function. The system automatically detects changes to the
ambient light and adjusts the brightness accordingly. Settings > Projection
Settings > Brightness > Smart Brightness/Custom
- a) Smart Brightness: Automatically adjusts brightness in accordance with ambient lighting.
- b) Custom: Manually adjust the brightness with the keys on the side of the remote control.
6) Eye Protection Feature
This product includes a smart motion sensor designed to protect the user’s eyes. Settings > Projection Settings > Eye Protection When this function is enabled, the smart sensor automatically cuts power to the projector lens when it detects that someone is too close. This helps prevent damage to the human eye.
7) Bluetooth Remote Control
Screenshot
Charging Port
a) Bluetooth Pairing
- Use the remote control buttons to start up the device for the first time.
- After turning on the projector and entering the system, press and hold the Center Shortcut and Settings keys at the same time for over 2 seconds within the first 5 minutes. The light will start to flash to indicate the remote control is now in pairing mode. The remote control will automatically attempt to pair and connect.
- If the pairing is successful, the projector interface will display the corresponding prompts.
- If the indicator light turns off and there are no prompts on the screen, the pairing has failed and you will have to try again. If you were unable to pair the remote control during initial setup, you can do so manually within the first 5 minutes of start-up. The name of the Bluetooth remote control on the pair screen should be Remote-control.
- Enter the settings page through Settings > Bluetooth > Bluetooth Pairing. Center Shortcut and Settings keys at the same time. After the remote control indicator starts to flash, select Refresh from the OS Bluetooth interface. Look for the device named Remote Control, then select Connect.
- Once you have paired your remote control with Bluetooth, the voice control function will become available.
b) Remote Control Indicator
-
During Bluetooth pairing, the indicator will flash for 0.5 seconds. After successful pairing,
the indicator will display a constant light for 2 seconds. If the pairing fails, the indicator switches off. -
When the battery is less than 10%, the indicator will flash twice at a 1-second interval, then flash cyclically at 0.2-second intervals.
-
When charging, the indicator will start pulsating.
8) Bluetooth Speaker Function
- This product can be used as an independent Bluetooth speaker. Press On > Bluetooth Speaker on the remote control to enter Bluetooth speaker pairing mode. The indicator should start pulsating in blue.
- Enable Bluetooth on the playback device, then scan for available Bluetooth devices. Find and pair with the device named JMGO. The pulsating indicator should switch to a solid blue.
- When the pairing is successful and Bluetooth is connected, the volume can be adjusted through the volume key of the remote control.
9) System Updates (online and offline supported)
a) Online Update: Head to Settings > System > Update Version. The system will
automatically
detect if your software is up-to-date. You will receive a prompt if the
software is already the latest version. If your software is out-of-date, you
will be asked if you wish to update it.
Note:
JMGO regularly releases software updates as continuous maintenance services.
We may push software updates without prior notice to ensure users can enjoy
up-to-date experiences and services.
b) Local Update: Download the software update package from the JMGO website,
copy the file to the root directory of a hard disk or USB, then insert the
hard disk or USB into the USB port on the projector body. Head to Settings >
System > Update Version, then select Local Update. The system will
automatically detect and install the update package.
Note:
Do not unplug the USB or cut off power during the update process.
-
File Management
This product can read from and write to local/external files. Select the File Management button to read from and write to local files, along with files on external hard disks, USBs, and other devices. -
Screen Share
To use the screen share function, select the Screen Share button from the homepage, then follow the prompts to connect a device to the projector. -
JMGO FUN
To control the product through the JMGO FUN app, select the JMGO Fun button from the homepage, then follow the prompts to download JMGO FUN from the App Store or JMGO Official Website.
You can download “Fun Control” from your mobile phone Appstore or, you can also find from our website (http://en.jmgo.com/remote.html)
Make sure that your mobile phone and JMGO projector both are on the same Wi-Fi network Launch “Fun Control”, then the projector will automatically discover the application
4. App Management
The operating system of this product is based on the Android platform, meaning
it is compatible with mainstream Android applications. To install an app,
download its APK file, copy it to the projector with a USB, then install it.
The product also includes uninstallation, auto-start-up management, and one-
click clear cache functions.
Environmental Protection
This Environment-Friendly Use Period (EFUP) label indicates that there is a 10
year period before hazardous substances contained in this device are likely to
leak out during normal use, causing possible harm to health and the
environment.
During normal use conditions, there will be no leakage or sudden change of
hazardous substances, no serious pollution to the environment, and no serious
damage to people or property.
This product has passed RoHS and REACH testing
Name and content of trace toxic and harmful substances or elements contained
in each component of this product
O: Hazardous substances in all homogeneous materials in this component are
under the reporting requirements of GB/T 26572-2011.
X: Hazardous substances in at least one homogeneous material in this component
reaches the reporting requirements of GB/T 26572-2011, and there is no readily
available industry alternative that meets the environmental protection
requirements of the China RoHS.
After-Sales Service Policy
Shenzhen Holatek Co., Ltd. (hereinafter “JMGO”) formulates its after-sales policies in strict accordance with relevant laws and regulations to provide the “three guarantees” of repair, replacement, and return.
1. Warranty Policy
- Service Period:
a) European Region
The validity period is calculated from the date of purchase, or the date of receipt of the package. If the product experiences a performance failure, the package must be returned within 30 days. The projector is guaranteed for 2 years.
b) Non-European Region
The validity period is calculated from the date of purchase, or the date of
receipt of the package. If the product experiences a performance failure, the
package must be returned within 30 days. The projector is guaranteed for 1
year.
If you encounter any problems during use or wish to know more about our after- sales services, please contact us at after-sales@jmgo.com.
2. Non-Warranty Policy
- This product is not covered by warranty in the below circumstances.
- The validity period of three guarantees has been exceeded.
- Any maintenance, misuse, collision, negligence, abuse, liquid ingress, accident, alteration, disassembly, or improper use of accessories not authorized by JMGO; quality problems caused by the installation of software; or the destruction or alteration of labels, machine serial numbers, or anti-counterfeiting labels.
- The model of the “three guarantees” certificate does not match or the model of the damaged product, or has otherwise been altered.
- Damages caused by force majeure.
- Damage caused by use in environments that do not conform to the specifications of the product manual.
- Failure or damage caused by computer viruses, hacker intrusion, or other malicious intrusions.
- Damage caused by the use of software that is not authorized by JMGO.
3. Three Guarantees Policy
- Return or replacement will not be provided in the following circumstances: Damage caused by human action, missing or damaged packaging, or missing or damaged internal components.
- When seeking a return or replacement, please return all provided accessories as well (including but not limited to product accessories, gifts, warranty cards, manuals, etc.).
- Tip: To ensure a smooth return or replacement process, we recommend that you keep the outer packaging, accessories, and other gifts provided with the products for 30 days from the date of receipt.
- JMGO has the right to refuse the return or replacement of products that do not meet the replacement requirements or exceed the warranty period.
- Back up your personal data and applications before seeking replacement or repair. The maintenance process may result in the loss of your personal data and applications. While JMGO will protect your personal privacy, it takes no responsibility for the damage or loss of personal data and applications resulting from the repair or replacement process.
4. After-Sales Service Channels
If you encounter any problems in the process of using the product, contact us
through one of the channels below.
- After-Sales Website: http://en.jmgo.com/faq/index/categoryshow/cat_id/15/
- After-Sales Email: after-sales@jmgo.com
5. Three Guarantees Service Card
Repair/Return/Replacement Service Instructions This service card helps JMGO
process repair, return, and replacement requests faster. 1) Before filling in
this service card, please contact our platform or vendor customer service to
ensure that we can help solve the problem. 2) After you have filled in this
service card, return it to us in the same package as the product.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>