Grandstream Networks GWN7001 Multi-WAN Gigabit VPN Router User Manual
- June 9, 2024
- Grandstream Networks
Table of Contents
Grandstream Networks GWN7001 Multi-WAN Gigabit VPN Router User Manual
OVERVIEW
The GWN7001/7002/7003 is a powerful enterprise-grade Gigabit Multi-WAN firewall router including 2 SFP ports for the GWN7002/7003 and multiple Giga- bit RJ45 ports that provide a comprehensive VPN solution in one and multiple scenarios. As a high-performance and dynamic firewall product, it supports DPI in-depth security detection and content security including URL filtering, DNS filtering, web content filtering, safe search, application identification, traffic sta-tistics, and other comprehensive attack protection, which can effectively ensure continuous and stable operation of enterprise core applications and services, and ensure enterprise management administrators can better monitor and manage network traffic. GVVN7001/7002/7003 integrates a series of rich func-tions, including NAT, firewall, VPN, load balancing, and bandwidth management capabilities. As a fanless PoE router, GWN7002/7003 can be powered by an external power adapter or IEEE 802.3af/at PoE Input, and 2x GbE ports can support 48V Passive or Active (IEEE802.3a0 PoE Output. It is also supported by GWN. Cloud and GWN Manager, Grandstream’s free cloud and on- premise network management platform makes managing your network or several net-works across multiple locations easier than ever before. Ideal for the enterprise retail, education, hospitality, and medical markets.
PRECAUTIONS
- Do not attempt to open, disassemble, or modify the device.
- Do not expose this device to temperature outside range of 0 °C to 40 °C for operation and -30 °C to 60 °C for storage.
- Do not expose the device to environments outside of the following humidity range: 10-90% RH (non-condensing).
- Do not power cycle the device during system boot up or firmware upgrade. You may corrupt firmware images and cause the unit to malfunction.
Package Contents
1x GWN7001 or GWN7002 or GWN7003
-
I x Power Adapter
-
lx Quick Installation Guide
-
Ix Ethernet Cable
GWN7001/7002/7003 PORTS
| No. | Port | Description |
|---|---|---|
| 1 | GWN7001: 6x Gigabit Ethernet ports GWN7002: 4x Gigabit Ethernet ports |
GWN7003: 9x Gigabit Ethernet ports Note: All ports support WAN/LAN configurable.
The Gigabit Ethernet ports include 2 x PoE OUT ports and ‘I x PoE IN port (GWN7002/7003 only).
2| | 2 x Gigabit SFP ports (GWN7002/7003 only).
3| | USB 2.0 port
4| | GWN7001: Power adapter connector (DC 12V, 1A)
GWN7002: Power adapter connector (DC 24V, 1A)
GWN7003: Power adapter connector (DC 24V, 1A)
5| | Lightning protection grounding post (GWN7003 only).
6| 
| Factory Reset pinhole. Press
for 5 seconds to reset factory default settings
Note: Ports with this symbol Pare configured to be used as a WAN port by default at the factory.
CONNECTING THE GWN7001/7002/7003
Power the GWN7001/7002/7003
GVVN7001/7002/7003 can be powered on using the right PSU or PoE (IEEE
802.3af/at) only for GVVN7002/7003.
Connect to the Internet
Connect the LAN/WAN or SFPNVAN (GVVN7002/7003 only) port to an optical fiber
broadband modem, ADSL broadband modem or community broadband interface.
Connect to GWN7001/7002/7003 Network
Connect your computer to one of the LAN ports.
INSTALLATION
Mounting GWN7001/7002 to the Wall
- Using a drill, make two holes in the wall with 135.0mm spacing, 6.0mm diameter. Put a plastic anchor and screw (not provided) on each hole.
- Mount the GWN7001/7002 router on the mounting screws.
Mounting GWN7003 to the Wall
- Use the provided screws to fix the two L-shaped Mounting bracket (rotated 90°) on both sides of the GWN7003 router.
- Stick the router port up and horizontally on the selected wall, mark the position of the screw hole on the L-shaped mounting brackets with a marker. Then, drill a hole at the marked position with an impact drill, and drill the plastic anchors (prepared by yourself) into the drilled hole in the wall.
- Use a screwdriver to tighten the screws (prepared by yourself) that have passed through the L-shaped mounting brackets to ensure that the GWN7003 router is firmly installed on the wall.
Grounding GWN7003
- Remove the ground screw from the back of the router, and connect one end of the ground cable to the wiring terminal of the router.
- Put the ground screw back into the screw hole, and tighten it with a screwdriver.
- Connect the other end of the ground cable to other device that has been grounded or directly to the terminal of the ground bar in the equipment room
.
ACCESSING THE CONFIGURATION INTERFACE
Now that you are connected to the GWN7001/GWN7002/GWN7003’s LAN port with
network cable, you can access into its configuration interface with:
myrouter.grandstream.com or default IP
address ( 192.168.80.1 ) then enter the password to login.
Note: GINN7001/GWN7002/GWN7003’s default password information is printed
on the MAC tag at the bottom of the unit.
To manage GWN7001/GWN7002/GWN7003 over cloud, please refer to https1//www.gwn.cloud.
The GNU GPL license terms are incorporated into the device firmware and an be accessed via the Web user interface of the device at my_device ip/gpl_license. It can also be accessed here: https://www.grandstream.comtlegaltopen-source- software To obtain a CD with GPL source code information please submit a written request to: info@grandstream.com
Refer to online documents and FAQ for more detailed information: httos://www.arandstream.com/our-oroducts
Support
Grandstream Networks, Inc.
126 Brookline Ave, 3rd Floor Boston, MA 02215. USA
Tel : +1 (617) 566 – 9300
Fax: +1 (617) 249 – 1987
www.grandstream.com
For Certification, Warranty and RMA information, please visit
www.orandstream.com
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>