EXTERIOR LIGHTS Sandgate 30 45w LED White or Opal Globe Amenity or Street Light Instructions
- June 9, 2024
- Exterior Lights
Table of Contents
EXTERIOR LIGHTS Sandgate 30 45w LED White or Opal Globe Amenity or Street
Light
DIMENSION
INSTALLATION INSTRUCTION
- Ensure no cables / wires are trapped during luminaire assembly.
- Care must be taken when removing / fitting lumminaire retractor to prevent LED damage.
Operation & Maintenance
Failed light source should be replaced promptly or the circuit switched off to avoid possible damage to control gear.
Important – Safety
Before carrying out any servicing on these luminaires, ensure that the mains supply is fully isolated. Disconnect the luminaire before insulation testing of the installation.
The light source contained in this luminaire shall only be replaced by the manufacturer or his service agent Oj, or a similar qualified person.
Example: IP junction box/ terminal block. If in doubt seek advice from qualified electrician. lZ1J Preparation of the ends of conductors: Wire ends striped to the length 7mm – 8mm. Add ferrules (for 1.5mm2 mini wires) to the wires if they are stranded.
Terminal block specified:
- Terminal block specified:
- The type of terminals: Screw.
- Number of terminals: 3
- Rated voltage: 450V
- Rated connecting capacity: 16A to EN60598 and 24A to EN60998
Example
- Box: WISKA COMBI 308/5/S
- Cable Gland x2: WISKA ESKVM20
Example: Terminal block fused cut out. If in doubt seek advice from qualified electrician.
- Preparation of the ends of conductors: Wire ends striped to the length 7mm – 8mm. Add ferrules (for 1.5mm2) to the wires if they are stranded.
- Terminal block specified
- Designed and tested in accordance with BS 7654:1997 and IEC/EN 6094 7-Part 1
- Detachable terminal block in extension trough facilitates termination of heavy duty cables
- Electroplated brass terminal blocks accept conductors up to 25mm2
- Number of terminals: 3
- The type of terminals: Screw
- Rated voltage: 230V
- Rated connecting capacity: 25A
Example:
- Lucy zodion – Titan2 Single and double pole cut outs.
