Wyze Labs WYZEC3B Cam User Guide

June 6, 2024
Wyze Labs

Wyze - logo

IN THE BOX

Wyze Cam x 1
Indoor Power Adapter x1
USB Cable x 1
Mounting Tape x1
Wall Plate x 1
Mounting Screw x1
Quick Start Guide x1
Wyze Labs WYZEC3B Cam

  1. Status Light

  2. Lens

  3. Microphone
    Wyze Labs WYZEC3B Cam - fig

  4. Speaker

  5. Power Cable

  6. MicroSD Card Slot (Card not included)

  7. SETUP Button

  8. 1/4″ Mount (Unscrew to access)

  9. Mounting Hole

SETUP

  1. Download the Wyze app and sign in or create an account.
    Wyze Labs WYZEC3B Cam - fig 1

  2. Connect the camera to a power outlet and wait for 20 seconds or until the status light flashes red.

  3. Press the SETUP button for 3 seconds or until there is a voice prompt.
    Wyze Labs WYZEC3B Cam - fig 2

  4. Follow the instructions in the Wyze app to finish the setup.

LIGHT INDICATORS DURING INSTALLATION
Solid red light
The device is powered on and initializing
Flashing red light
The device is ready to connect
Flashing red & blue lights
Connection is in progress
Flashing blue light
The device is connected and finishing setup
Solid blue light
The device is working properly

LIGHT INDICATORS AFTER SETUP
Solid red light
The live stream is being viewed or a recording is in progress
Quickly flashing red light
Siren is in use
Solid blue light
The device is working properly and no operations are running (edited)

FCC WARNING:

Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
FCC RADIATION EXPOSURE STATEMENT:
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20cm between the radiator & your body. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
—Reorient or relocate the receiving antenna.
—Increase the separation between the equipment and receiver.
—Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
—Consult the dealer or an experienced radio/TV technician for help.
ISEDC RSS WARNING:
This device complies with ISEDC licence-exempt RSS standard (s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device.
ISEDC RADIATION EXPOSURE STATEMENT:
This equipment complies with ISEDC RF radiation exposure limits set forth for an uncontrolled environment. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. This equipment should be installed and operated with a minimum distance of 20cm between the radiator & your body.
Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
Only use the power supply provided.

NEED HELP?
Contact our support team: https://support.wyze.com
Join our Community: https://wyze.com/community
VOUS AVEZ BESOIN D’AIDE?
Contactez nos magiciens du soutien: https://support.wyze.com
Rejoignez Notre communaute: wyze.com/community
Scan the OR code to learn more

https://support.wyzecam.com/hc/en-us

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals