nacon GC-200WL Wireless PC Controller User Manual

: June 6, 2024
: nacon

Table of Contents

NACON GC-200WL Wireless PC Controller User Manual
- NACON™ GC-200WL gaming controller for PC.
- Recycling
Read User Manual Online (PDF format)
Download This Manual (PDF format)

NACON GC-200WL Wireless PC Controller User Manual

GC-200WL

NACON™ GC-200WL gaming controller for PC.

Thank you for purchasing this NACON product. In case of a malfunction please refer to the support information at the end of this manual. We highly appreciate any feedback which helps us to improve our products. Please keep this instruction manual for future reference.

Product specifications

Wireless gaming controller with 2.4GHZ RF technology for Windows PCs
2 analogue sticks, 4 buttons, 2 triggers, 2 shoulder buttons, digital pad, BACK, START & HOME button
Switchable Direct Input 8 and X-Input mode for 100% compatibility with all PC games
Soft touch treatment for perfect grip
2 vibration motors
Compatible with Windows® VISTA®/7/8/10

Contents of the package

NACON GC-200WL gaming controller
2.4GHz RF dongle
USB-A to Micro-USB charging cable
Quick start Guide
Warranty insert
Precautions for use
Regulatory compliance information

Control elements

Left analogue stick
Right analogue stick
D-Pad
Action buttons 1-4
Left trigger and shoulder button
Right trigger and shoulder button
BACK button
START button
HOME button
D/X switch
Charging socket
Battery level indicator
RF dongle & dongle storage socket
(no function)

Charging your controller

The NACON GC-200WL wireless controller is equipped with an internal 700mAh battery. To charge this battery use the supplied Micro-USB cable and connect it to the socket on the top of the GC-200WL. Then plug it into one of your free USB ports on your PC. The 4 LEDs will light up to indicate that the charging process has started and will also show the charging level of the battery.

Remark: Please note that the controller can’t be used during the charging process.

First-time connection with the PC

The NACON GC-200WL is a so-called Plug´n´Play device. This means that the necessary driver software should be installed automatically if you connect it to your computer for the first time. Here are the steps in detail:

Make sure your that the battery of your GC-200WL controller is sufficiently charged.
Turn on your computer, wait for it to boot and log in to your Windows® desktop.
Look for an unused USB slot on your PC and plug in the USB dongle of your NACON GC-200WL controller.
Windows® will detect the new device and after a few seconds it will start the installation process for the appropriate drivers. This is shown by a small icon in the taskbar.

Installing Device Notification

The installation might take a while depending on the speed of your system. Once the installation is complete, you will be presented with the according message. You can now use your GC-200WL.
On your GC200WL, you can press the Home button for 6 seconds to turn on the controller and let it connect to the dongle.

Dongle compartment

When not in use, the dongle of your NACON GC-200WL wireless controller can be stored in the socket on the bottom of the controller to prevent it from loss.

Remark: The dongle compartment is for storage only and does not have any electronic function.

D/X switch

There are different ways for modern computer games to communicate with your controller and vice versa. Your GC-200WL supports the two most commonly used ones: Direct Input 8 and X-Input.

Sometimes a game only supports one of these two protocols. Since both can´t be run simultaneously, your GC-200WL features the D/X switch (10) to select one of these two protocols, to make sure it works with all games.

Remark: After changing the protocol, the controller needs some short time to switch.

Recycling

When this crossed-out wheeled bin symbol is attached to a product it means that the product is covered by the European Directive 2002/96/EC. Please inform yourself about the local separate collection system for electrical and electronic products.

Important Safeguards & Precautions

1/ This product is designed for indoor use only. Do not expose it to direct sunlight or bad weather.
Do not expose the product to splashes, rain, drips or moisture. Do not immerse it in a liquid.
Do not expose to dust, high levels of humidity, extreme temperatures or echanical shocks.
Do not use and do not open if the equipment is damaged. Do not attempt to repair it.
When cleaning the outside, only use a soft, clean and damp cloth. Detergents can damage the finish and get inside the product.
Do not carry the product while holding it by the cable.
This product is not designed for people (including children) suffering from a physical, sensory or mental handicap, or for users without the necessary and relevant experience or knowledge (unless they have been given advice and instructions on how to use the device from a person responsible for the user). Do not leave the product unattended, do not leave this product within the reach of children. Not suitable for children under 7 (the cable can get wrapped around the neck).
The maximum operating temperature must not exceed 35°C