CONNECTED MAX Smart Indoor Camera User Guide
- June 6, 2024
- CONNECTED MAX
Table of Contents
SMART INDOOR CAMERA
QUICK START GUIDE
What’s in the box
Consult the checklist below for all components.
Description
Description
| Power port | DC 5V/1A (USB); AC 12V-24V (AC supply) |
|---|---|
| Status light |
- Blinking red light: awaiting Wi-Fi connection
- Blinking blue light: connecting the Wi-Fi
- Solid blue light on the camera is working correctly
- Solid red light on the camera is malfunctional
Microphone| Captures sound for your video
SD card slot| Supports local SD Card storage (Max 128 GB)
Reset| Press and hold on for 5 seconds with a pin to reset (Camera will return
to factory defaults)
Install
-
Stick the adhesive tape in the middle of the camera bottom
-
Put the camera on a clean flat surface
-
Use included USB Cable and Power Adapter to plug into a standard wall outlet and into the port on the back of the camera to power the camera.
Connect
Download
The Cree Lighting App is available for both iOS and Android.
Search Cree Lighting in the App Store or Google Play to download the app.
https://apps.apple.com/us/app/cree-lighting/id1511968459
|
---|---
Pairing to your network
The Connected Max Smart Indoor Camera must pair to a 2.4GHz Wi-Fi network.
Once paired, you can control any Wi-Fi or cellular network. For most users,
pairing will be quick and simple. But depending on the type of wireless router
you have, you may need a little more information to get started. Refer to our
Wireless Router Guide at
creelighting.com/connectedmax for more
information.
NOTE: If you need to re-select the Wi-Fi network, please press and hold
the “RESET” button for 5 seconds, the device will restart, and the indicator
will be flashing red.
Connection
How to pair your Indoor Camera
Download the Cree Lighting app and register your account. Open the Cree
Lighting App, click “Sign Up”, read the “User Agreement Privacy Policy” and
click “Agree.”
QR Code Configuration
-
Click “Add Device” or ”+” and then select “Cameras” to add Indoor Camera.
-
The status indicator on the camera should be flashing quickly. If it is not, reset the camera and then tap “Next.” Then input your Wi-Fi credentials and tap “Next.”
NOTE: Camera only supports 2.4GHz Wi-Fi network -
Next, scan the QR code on your phone with the camera, when you hear an audible prompt, the pairing has been completed. Tap on “I Heard a Prompt.”
-
Now the camera will pair with your network.
IMPORTANT PRODUCT INFORMATION
SAFETY INFORMATION: FAILURE TO FOLLOW THESE SAFETY INSTRUCTIONS COULD RESULT IN FIRE, ELECTRIC SHOCK, OR OTHER INJURY OR DAMAGE.
This device is not intended for underwater use. To protect against electric shock, do not intentionally submerge or immerse your device, battery, or adapter in water or expose your device or adapter to other liquids. Do not spill any food or beverages on your device, battery, or adapter. Do not attempt to clean or polish your device, battery, or adapter with or expose your device, battery, or adapter to oil, lotion, or other abrasive substances. Don’t expose your device, battery, or adapter to saltwater or other conductive liquids. Do not expose your device, battery, or adapter to pressurized water, high-velocity water, or extremely humid conditions (such as a steam room). If your device, battery, or adapter gets wet, carefully unplug all cables without getting your hands wet and wait for it to dry completely before plugging it in again. Do not attempt to dry your device, battery, or adapter with an external heat source, such as a microwave oven, or hairdryer. To avoid the risk of electric shock do not touch your device, battery, or adapter to any wires connected to your device during a lightning storm while your device, battery, or adapter is plugged in. If your device, battery, or adapter appears to be damaged, discontinue use immediately.
Use only accessories supplied with your device or specifically marketed for
use with your device, to power your device.
The use of third-party accessories may impact your device’s performance. Read
all safety instructions for any accessories before using your device.
Safety Information
FCC Statement
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses, and can radiate
radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more
of the following measures:
—Reorient or relocate the receiving antenna.
—Increase the separation between the equipment and receiver.
—Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
—Consult the dealer or an experienced radio/TV technician for help.
FCC Radiation Exposure Statement
This device complies with FCC radiation exposure limits set forth for an
uncontrolled environment and it also complies with Part 15 of the FCC RF
Rules. This equipment must be installed and operated in accordance with
provided instructions and the antenna(s) used for this transmitter must be
installed to provide a separation distance of at least
20 cm from all persons and must not be co-located or operating in conjunction
with any other antenna or transmitter.
End-users and installers must be provided with antenna installation
instructions and consider removing the no-collocation statement.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Caution!
Any changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.