CONNECTED MAX CMACC-CHIME-WH Wireless Doorbell Chime User Guide
- June 5, 2024
- CONNECTED MAX
Table of Contents
DOORBELL CHIME
QUICK START GUIDE
IMPORTANT PRODUCT INFORMATION
SAFETY INFORMATION: FAILURE TO FOLLOW THESE SAFETY INSTRUCTIONS COULD RESULT IN FIRE, ELECTRIC SHOCK, OR OTHER
INJURY OR DAMAGE. This device is not intended for underwater use. To protect against electric shock, do not intentionally submerge or immerse your device, battery, or adapter in water or expose your device or adapter to other liquids. Do not spill any food or beverages on your device, battery, or adapter. Do not attempt to clean or polish your device, battery, or adapter with or expose your device, battery, or adapter to oil, lotion, or other abrasive substances. Don’t expose your device, battery, or adapter to saltwater or other conductive liquids. Do not expose your device, battery, or adapter to pressurized water, high-velocity water, or extremely humid conditions (such as a steam room). If your device, battery, or adapter gets we, carefully unplug all cables without getting your hands wet and wait for it to dry completely before plugging it in again. Do not attempt to dry your device, battery, or adapter with an external heat source, such as a microwave oven or hairdryer. To avoid the risk of electric shock do not touch your device, battery, or adapter to any wires connected to your device during a lightning storm while your device, battery, or adapter is plugged in. If your device, battery, or adapter appears to be damaged, discontinue use immediately.
Use only accessories supplied with your device or specifically marketed for use with your device, to power your device. The use of third-party accessories may impact your device’s performance. Read all safety instructions for any accessories before using your device.
Chime Appearance
Description
| Mini USB | DC5V±10%, USB power supply |
|---|---|
| Reset | Press the RESET for 5s to restore Factory Settings; |
Click the RESET button to pair the doorbell chime
Status light| Blinking blue light: Awaiting configuration;
Solid blue light: Configuration completed
Functions
Change Ringtone
You can choose your own ringtone from the four ringtone options
Ringtone volume
The volume of the chime can be adjusted by sliding the volume of your
smartphone
Chime Pairing
Pair via pressing the ringing button
Note: Doorbell and Chime have been configured before leaving the factory, if the chime isn’t paired by default, please use the following instructions to pair it manually with the doorbell camera.
Step 1: Supply power to your Chime and Doorbell.
Step 2: A short press on the RESET button on the Chime, and you will see the indicator flashes blue, indicating the device is in pairing mode.
Step 3: Press the doorbell button, and the Chime will sound to react.
When pairing is successful, the Chime indicator will be solid blue.
Alternate Pairing Method
Step 1: Click the “RESET” button on the chime, the blue light blinks, and
enter the configuration mode.
Step 2: Access “SETTINGS” in the Cree Lighting APP, and press “Basic
Function”.
Step 3: Select the “Wireless Chime“, and click “Chime Pairing“, to confirm
that the blue light of the chime blinks.
Step 4: Click “Pair“and your chime will automatically pair your doorbell.
Step 5: Set the functions on your chime after receiving the prompt “The
pairing command has been sent successfully!“.
Note:
If the configuration fails, please press the “RESET” button for 5 seconds to
reset your chime and click the “RESET” button, then add it again.