NANLITE 12-2005 Compac 40B Bi-Color Slim Soft Light Studio LED Panel User Manual
- June 6, 2024
- NANLITE
Table of Contents
NANLITE 12-2005 Compac 40B Bi-Color Slim Soft Light Studio LED Panel
Technical Data
- LED Quantity: 400pcs
- Voltage: AC 100V-240V
- LED Power: 40W x 2
- Color Temperature: 3200K-5600K
- CRI(Ra): 95
Product Details
- Color temperature knob
- Dimmer knob
- Power switch
- Bracket fixing knob
- Fuse base
- AC power socket
- Angle fixing knob
Detailed description
- Color temperature knob: For adjusting the color temperature.
- Dimmer knob: For adjusting the brightness.
- Power switch: Turn on/off the fixture.
- Bracket fixing knob: For connecting the fixture with the light stand.
- Fuse base: For placing the fuse.
- AC power socket: AC power input port.
- Angle fixing knob: For adjusting the illumination direction of the fixture.
Usage
- Please install the fixture on the light stand, then adjust the fixture to the desired position.
- Please switch off the power then connect to AC 100-240V power.
- Press the power switch to turn on the fixture.
- Rotate the “Dimmer knob” to adjust the brightness, rotate the “Color temperature knob” to adjust the color temperature.
- Please turn off the fixture and unplug the power cord when stop using the light.
Security Warning Info
- Please open the package to check if it is damaged from transportation after receiving the light. In case of damage caused by transportation, please do not use this light and contact the dealer as soon as possible.
- Do not use a power cord if damaged insulation. Do not unplug hard or drag the power cord directly.
- Make sure that the power supply voltage used matches the voltage specified by the light before installation.
- When not using or cleaning the light, please turn it off.
- Keep the light safely stored and away from children.
Notice
- Before using, please read the instruction sheet carefully and then install the product according to the instruction sheet.
- The product should be operated within the normal voltage.
- Pull insert plug, please do not use too much force to pull connection. And do not touch the connection by wet hand.
- Please keep this product in a dry and ventilated place, to avoid the circuit getting wet, and causing a short circuit.
- When stopping using, please turn off the power to preserve the life of the LEDs.
What’s in the box? Please kindly check.
Troubleshooting List
| Potential Malfunction | Diagnosis |
|---|
The light can not light up.
| 1. Please check if the fixture is in the “off” position.
2. Please check whether the connection between power cord plug and fixture is loose.
3. Pull out the fuse base, to check whether the fuse has disconnected.
The lamp is flickering.
| 1. Please check whether the voltage value is within specified parameters.
2. Check if there is any high temperature object near the light that could cause the operating environment temperature too high.
If the failure is not solved after the above troubleshooting procedures, please contact the dealer or manufacturer for repair. The instruction was written according to the strict production test of our company, if there are any changes related to the design of the product later, we will not keep you updated for that.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>