lubluelu SL60D 2 in 1 Robot Vacuum and Mop Combo Cleaner Installation Guide

lubluelu SL60D 2 in 1 Robot Vacuum and Mop Combo Cleaner

Product Information

This product is a robotic vacuum cleaner designed to clean floors efficiently and effectively. It comes with side brushes and a charging base for easy maintenance and charging. The vacuum cleaner can be controlled using an app for added convenience.

Product Usage Instructions

1. Remove the protective strips from the vacuum cleaner.
2. Install the side brushes by pressing the left brush (L) and the right brush (R) into their corresponding holes until a click sound is heard.
3. Connect the adapter to the charging base and arrange the power cable properly.
4. Place the charging base in a proper position and power it on for charging.
5. Make sure not to move the charging base arbitrarily and keep it away from direct sunlight.
6. To power on the vacuum cleaner, press and hold the power button. When the indicator light is illuminated, place the robot on the charging base for charging. A voice prompt will indicate successful charging.
7. If you want to connect the vacuum cleaner to the app, please follow the steps provided in the app’s instructions (steps 7-13).

USing

1. Remove the protective strips
2. Install the side brushes. Press the left brush (L) and the right brush (R) respectively into corresponding holes until the “click” sound is heard.
3. Connect the adapter to the charging base and arrange the power cable properly.
4. Place the charging base in proper position and power on for charging
5. Do not move the charging base arbitrarily and keep it away from direct sunlight.
6. Power-On and Charging Press and hold to power on. When the indicator is illuminated, place the robot to the base for charging. The voice prompt of “Start Charging” indicates successful charging.

Connect to the APP

1. Activate the WiFi in phone to connect to 2.4Ghz network.
2. Download App: Search “Smart Life” in Appstore or scan the QR code.
3. Registration: Open the APP and complete the registration.
4. Log in the APP and click “Add Device”/+ Button.
5. Choose “Small Home Appliances Robot Vacuum (Wi-Fi).
6. Enter the password and click “Next”
7. Press both “Power + Charge buttons for 3 seconds and the light starts to flash, which means the robot starts network distribution.
8. Click “Confirm the Indicator is Blinking” button.
9. Select the AP mode
10. Click “Go to Connect’
11. Then select SmartLife- XXXX and return.
12. Wait for the connection.
13. Click “Done” to log in APP.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>