BYD LV BMU-IP55 Battery-Box Premium Instruction Manual

June 6, 2024
BYD

BYD LV BMU-IP55 Battery-Box Premium

BYD LV BMU-IP55 Battery-Box Premium

VALIDITY
This document is valid for the Battery-Box Premium LV BMU – IP55 (Battery Management Unit) (“BMU”) from firmware version 1.11.

INTENDED U
BMU is applicable for the BYD Battery-Box Premium LV system(s) ( LV FlEX, LV FlEX LITE, LVS, LVS LITE, LVL) (“Battery-Box”), and works as a control unit for the system(s).

PRODUCT DESCRIPTION

BMU is equipped with a WLAN interface as a standard. The APP Be Connect could communicate with BMU through the WLAN.product detail 1

The WLAN name and code are on the label of BMU.

product detail 2

  1. Ethernet port
  2. RJ45 port for connection with an inverter
  3. RJ45 port for connection with Battery-Box
  4. Stop button and status LED

Assignment of Port B

product detail 3

SCOPE OF DELIVERY

  • 1XBMU
  • 1 X Instruction Manual
  • 3 X Connectors
  • 1XHanger

TECHNICAL DATA

BYD LV BMU-IP55 Battery-Box Premium table 1

*BMU Is powered by Battery-Box through the network cable. No other power supply Is needed.

CONNECTION DIAGRAM

product detail 4BYD LV BMU-IP55 Battery-Box Premium table
2

  1. Detailed connection instructions with inverters could be read in the Battery-Box LVL/LVS Quick Start Guide.
  2. The communication cable between BMU and an inverter cannot be longer than 10 meters.
  3. And the cable should be CAT 5 shield or above.
  4. Please make sure the correct pins are connected between BMU and an inverter.
  5. The connection between BMU and Battery-Box should be the Straight-Through Wired Cable.
  6. Connected to the Internet is highly recommended.

MOUNTING AND CONNECTION

Install BMU on the wall or a rack. The recommended expansion screw size is M6 X 12. The minimum distance from the ground is mm.

product detail 5 product detail 6 product detail
7COMMISSIONING

  1. Make sure an inverter, Battery-Box, and BMU are correctly connected.
  2. Press the Start Button on Battery-Box for 3 seconds.
  3. Refer to Battery-Box Premium LVL/LVS Operating Manual for further steps.

UPDATING FIRMWARE
The firmware of BMU could only be updated when it operates with Battery- Box. Please refer to Battery-Box Premium LVL/LVS Operating Manual for further information

LED status

product detail 8 product detail 9

**ls white once then ls blue several times are a circle, and also error codes. The definition of the error codes could be found in Battery-Box Premium LVL /LVS Operating Manual.

DISPOSA
Dispose of BMU following the locally applicable disposal regulations for electronic waste.

CONTACT

BYD Global Service
bboxservice@byd.com
Telephone: +86 755 89888888-47175
Address: No.3009,BYD Road, Pingshan,
Shenzhen,518118, P. R.Ch i na
www.bydbatterybox.com

Social media link
https://www.facebook.com/BatteryBoxBYD/
https://twitter.com/BYD Battery Box
https://www.linkedin.com/company/byd-battery-box

Australia Alps Power Pty Ltd
service@alpspower.com.au
Telephone: +61 2 8005 6688
Address: 14/47-51 Lorraine
St Peakhurst NSW 221
www.alpspower.com.au

Europe EFT-Systems GmbH
service@eft-systems.de
Telephone:
+49 9352 8523999
+44(0)2037695998(UK)
+34 91 060 22 67(ES)
+39 0287 368364(1T)
Address: Bruchtannenstra&e 28, 63801
Kleinostheim, Germany
www.eft-systems.de

South Africa
AFRIPLUS ENERGY GROUP (PTY)
support@afriplusenergy.co.za
Telephone: +27 21140 3594
Address: The Pavilion, Corner of
Dock & Portswood Road, V&A
WATERFRONT, 8001, CAPE
TOWN

USA
BYD US Service
bboxusservice@byd.com
Telephone:+1(833)338-8721

LATAM
BYD LATAM Service
bboxservLATgrp@byd.com

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals