DURAVIT 700312000000000 Rectangular Bathtub Instruction Manual
- June 12, 2024
- DURAVIT
Table of Contents
700312000000000 Rectangular Bathtub
Instruction Manual
Important information
About this document
All documents related to this product and further information are available
online:
- Access online documents at qr.duravit.com or www.duravit.com.
Safety
Purpose of the document
The instructions are part of the Duravit product. Failure to follow the
instructions may result in personal injury, product damage and/or property
damage.
- Read and follow the instructions.
- Keep this document and pass it on to subsequent users.
We reserve the right to make technical improvements and visual changes to the products illustrated.
Target readership and qualifications
All work associated with the installation may only be undertaken by plumbers.
- Plumbers are persons with the appropriate technical training, knowledge and experience so that they can recognise and avoid dangers and risks that may arise during the installation in the sanitary area.
- Plumbers are qualified to select and use suitable protective equipment.
- Plumbers are familiar with and observe the installation regulations of local utility companies and countryspecific standards.
Avoiding damage
Product and/or property damage
A breach of local and country-specific regulations and standards can cause
damage to the product and/or property damage.
-
Observe the local installation regulations and any country-specific standards at all times.
Requirements at the installation location The pre-installation is carried out properly. -
Access the pre-installation data sheet at qr.duravit.com or www.duravit.com.
Mounting instructions
13 Mounting the cable-driven waste and overflow
The connecting hose #790159/#790166 is recommended for mounting a bath spout
with a waste and overflow set or base inlet.
28 Providing for an inspection hatch
- Provide for an inspection hatch in the area of the cable-driven waste.
- Dimensions of the inspection hatch: min. 20 x 20 cm / 50–50”.
35 Close the inspection hatch
- Seal the inspection hatch against spray water.
- The inspection hatch may only be opened with a tool.
59209
Order no.: 70000675_22.07 .10 – We reserve the right to make technical
improvments and design modifications to the products illustrated.
DURAVIT AG P.O. Box 240
Werderstr. 36 78132 Hornberg
Germany Phone +49 78 33 70 0
Fax +49 78 33 70 289
info@duravit.com
www.duravit.com
Documents / Resources
|
DURAVIT 700312000000000 Rectangular
Bathtub
[pdf] Instruction Manual
700312000000000, 700312000000000 Rectangular Bathtub, Rectangular Bathtub,
Bathtub
---|---
References
- Duravit - High Quality Bathroom Products | Duravit
- Duravit QR
- High Quality Bathroom Furniture | Duravit
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>