midoceanbrands MO9838 True Wireless Earbuds with Charging Base User Manual

June 6, 2024
midoceanbrands

midoceanbrands MO9838 True Wireless Earbuds with Charging Base

midoceanbrands MO9838 True Wireless Earbuds with Charging Base
PRODUCT

Product Introduction

  1. MICRO USB Charging Input port on Charging Box
  2.  Magnetic Charging Sensor Point on Right Earbud and Charging Box
  3. Magnetic Charging Sensor Point on Left Earbud and Charging Box
  4. Charging Indicating LED on box
  5.  Earbud Sensor Touching Control Point
  6. Earbud indicating LED

midoceanbrands MO9838 True Wireless Earbuds with Charging Base
FIG-1

MO9838

Power On
When the earbuds are removed from the charging box, press & hold the touching sensor control button on both earbuds for 3 seconds to turn the power on.

When the earbuds are in the charging box, remove the 2 earbuds and they will power on automatically.
When both earbuds are powered on, you will hear the indicating sound: Power On, and you can see the two earbuds’ LED indicator will be flashing GREEN and WHITE alternately.

Power Off
You can choose from the below 2 ways to power off the earbuds.

Option 1: Put the earbuds into the charging box, the earbud will power off and switch to charging mode automatically. Green led on when in Charging mode.
Option 2: You can press and hold any of the earbuds’ sensor buttons for 3 seconds to power off. When 2 earbuds power off, you will hear the indicating sound: Power Off. The green indicating light will flash 3 times.

Pairing both earbuds

The 2 earbuds will pair with each other automatically within 5seconds after powering on.

Wireless Connection with Device

After both earbuds are paired with each other, open the Wireless setting on your Mobile, iPad or other wireless enabled devices, search “MO9838”, and select it to connect. You will hear CONNECTED when earbuds connect with your device. Once there Wireless is connected successfully, the Indicating LEDs will turn to white light flashing slowly. Then you can enjoy music through the earbuds from your device.

Remarks :

  1. After the first time you have connected the earbuds will be connected with your mobile automatically as long as you power on the earbud and your mobile “Wireless” is on and MO9838 is still listed from your BT list of devices.
  2. Earbuds will power off automatically if no BT connection within 3 minutes.
  3. After both earbuds are paired with each other but not connected with Wireless devices, please don’t press your earbud’ sensor button, it may cause 2 earbuds to unpair, if this occurs please put the 2 earbuds into the charging box then take them out again to restart them.

Control Button Functions on Earbuds

  • Playing/ Stop music: When playing music, Short press any earbud’ touching sensor button to Stop/Playing music
  • Answer call: When a call is received short press any earbud touching sensor button to answer the phone call
  • Clear Call: When on a call short press any earbud’ touching sensor button to end the phone call
  • Decline a call: Press and hold any of the earbuds’ touching sensor button for 1.5seconds to decline the calling (pay attention: long press over 3seconds will power off)
  • Low Power Indication When the power level is lower than 5%, you will hear an indicating sound DUDUDU every 1 minute. Earbud’ indicating light will turn to GREEN LED and continue to flash slowly. When power is lower than 1%, the earbuds will power off automatically with GREEN LED quick flash 3 times and the sound warning Power Off. Please charge for your earbuds.
  • Charging for charging box: Connect the charging box with the power supply via the provided Micro USB charging cable. Charging box’ WHITE LED will Flash when charging, and WHITE LED will remain ON when fully charged.
  • Charging for Earbuds: Just place earbuds into the charging box, the earbuds will enter into charging mode automatically as long as your charging box has power or is plugged into the power supply. Earbud’ GREEN LED on when charging, Light Off when fully charged.

Specifications

  • Wireless Version:                   JL V5.0
  • Wireless Working range:        10M
  • Earbud’ battery:                    Li-polymer 35mAH*2
  • Charging box battery:           Li-polymer 400mAH
  • SNR:                                    80db
  • Frequency response:            20HZ-20KHZ
  • Frequency:                           2402-2480MHZ
  • Earbud Input:                     5V 35mA MAX
  • Charging box input:           5V 400mA MAX
  • USB Cable Input:               5V 1A
  • Charging time:                  around 1.5hours
  • Playing time:                    Around 3-4Hours (50% volume)
  • Around 5-6 hours (10% volume) The charging box can charge the earbuds approx. 4 times
  • Accessory: 1pc Charging Cable,1pc user manual

“High sound pressure” “

Hearing damage risk”

“Do not listen to high volume levels for long periods”

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

Related Manuals