time2 HSIP2 Outdoor Camera PC User Guide
- June 6, 2024
- Time2
Table of Contents
time2 HSIP2 Outdoor Camera PC User Guide
Outdoor Camera
Connecting the Camera
- Screw the WiFi Antenna into the gold screw at the back of the camera.
- Plug the power adapter into the power port lead attached to the camera.
- Plug one end of the Network>Ethernet cable into Ethernet port lead attached to the camera and the other end into your WiFi Internet Router. It will take approximately 30 seconds for the camera to power up.
- Once the power cable and Ethernet cable have been connected, you will hear a faint click to indicate the camera has been connected.
Smartphone Setup
-
Download the Time2 Surveillance pro APP from the Apple Appstore or the Google Playstore.
-
After opening the APP click on the Add Device tab
-
You can set the camera up by either scanning the QR Code or Via the LAN Search.
-
If using the LAN Search , click the the LAN Search tab and select your camera.
-
Once you have selected your camera, the camera information will be filled. Please leave the Password field empty.
-
Click Done to save your settings.
-
For extra security you will be asked to to change the username and password. Click on the camera and it will take you to the user settings.
-
Change the details for the Administrator only and click Done to save your changes.
-
Once the camera appears online click on the camera to view the Live Feed.
Wi-Fi Setup
Using this setting you can set the camera to function over your wireless network.
Please note: When setting the camera up for the first time, it will need to be wired into the internet router first.
Click “ Manage Wi-Fi network ” to search for networks your camera can connect to. Click on the network you would like the camera to connect to.
Enter your network password then click “ Done ” in the top right hand corner and remove the Ethernet Cable.
The camera will automatically configure itself with the router. Once this is complete the camera will restart and the connection will be established.
Camera Controls
Simply swipe in any direction to move the indoor rotating camera. Other actions available are below:
Please note the outdoor camera is a static camera and cannot pan/tilt.
Camera Reset
-
Remove the camera on the software by clicking the minus button. If you are accessing the camera from the Mobile Phone application click on the “Device Management” icon on the top right hand corner. Your camera will appear with the trash can icon next to it. Simply click on this to remove it from the application.
-
Remove the Ethernet cable from the camera.
-
Ensure the power cable is inserted.
-
Press and hold the reset button that can be located under the rubber cap on one of the leads attached to the Outdoor Camera until you hear a faint click.
Once the reset has been completed you will be required to carry out the initial setup for the camera (start from page 3).
Support
For further support with setup and if you require any help to make the most of your camera please contact our customer services support team.
https://www.time2technology.com/en/support/