Dongguan X Power Intelligent Technology T3 True Wireless Stereo Earphone User Manual

June 6, 2024
Dongguan X Power Intelligent Technology

USER MANUAL
T3

True wireless stereo Earphone

Thank you for purchasing this product, this product has a fashionable appearance and high-end sound quality. Before using this product, please read and strictly follow the instructions and precautions, and keep it for future reference.

PRODUCT DIAGRAM

Pie full charge the earbuds and charging box before first using,
Product description:

  1. After taking out the earbuds from the charging box , the earbuds wit turn on and pair automatically.the mobile phones can search the earbuds devices and use directly(The first searching will take 8s)
  2. Please charge the earbuds and charging box with a 5V adaptor, It is prohibited to use a fast-charging adaptor or any other adaptor which a voltage over 5V.
  3. When the earbuds can not be charged when putting into the charging box, pls kindly check If the charging box has power or not firstly, then please wipe off the charging pin with a rag and put the earbuds into the charging box again to charge the earbuds.
  4. When the earbuds is abnormal in the process of using, for example. there is only a single channel is working, pl ease pit two earbuds into the charging box for 3-4s, then take out to get pairing again
  5. The two earbuds In this product can be workable separately, after connecting with mobile ph ones, if turned off one of the earbuds, the other one can be workable continuously.

Bluetooth Earbuds
Earbuds model:13
Bluetooth version: 875.1
Earbuds battery: U-polymer 30nVth
Playing time: 3-4hrs
Stand-by time: 40-50hrs
Charging Box
Battery capacity: 300mAh
Charging voltage: DC5V
Charging current 300mA
Discharging current: 50mA
Charging port: Type-C/Touchable magnetic pin
Waming: It is strictly prohibited to place the product in an overheated or undercooled place. A temperature higher the) 50 r. or lower than 10 r. will affect the battery performance.

Hearing Protection.
Do not use it at high volume for a long time to prevent hearing damage
Do not adjust the sound too large, In can you cannot hear the surrounding sound.
Do not use while driving.

Starting/Pairing/Connecting

Starting
Taking the (thuds out of the rot arging box, the LED flashing Indicates eabuds starting on automatically.
At the status of switching on, long touch left-right button for 3s to turn on the earbuds
At the status of switching off, long touch left/right button for 55 to turn off the earbuds
The master and slave earbuds will pair aulonialically when they am taken out from the charging box: red and blue Indicator keep flashing when earbuds pairing; the master earbud keep red end blue indicator fleshing and the slave earbud keep blue indicator fleshing when they paired; The MIIIIIMr and sieve earbuds keep blue indicator flashing when they paired Moth. cell phones.
Connecting
Auto connection: Take the earbuds out of the charging box, wait 2-3s for earbuds pairing, Open your Bluetooth devices and search°1-3′, choose and get a connection. If connecting fails, turn oft the mobile phone’s Bluetooth function and re-open again.

Charging

Earbuds charging
Red Indicator keep lighting on when charging earbuds Indicator light off when earbuds full charged
Charging box charging
Red Indicator flashes slowly when charging the charging box.
Red indicator keep lighting, on when charging box full Charged
Charging port Type-C

FCC Statement
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC
Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
— Reorient or relocate the receiving antenna.
— Increase the separation between the equipment and receiver.
— Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
— Consult the dealer or an experienced radio/TV technician for help This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions (1)this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

Related Manuals