Tevii Technology G102RX SmartShare Mini Wireless Presentation and Collaboration System User Guide

Wireless Presentation and Collaboration System
for the modern enterprise
SmartShare mini
G102RX
User Guide

Version 1.0
ViewPlay Co., Ltd.

Introduction

SmartShare mini is an intuitive and high-efficiency 1080p wireless presentation and collaboration system that enables any meeting participant to simply share the content from their laptop, mobile phone, or tablet on the projector or large screen wirelessly, no APP required, no setup, no messy cables, just click and share. SmartShare mini supports up to 30 presenters to share their content instantly without wasting valuable meeting time.

A standard SmartShare mini is a combination of one transmitter and one receiver, the receiver is connected to a projector or display, and the transmitters are connected with  PC or any device with an HDMI jack, after connected, users click the button on the transmitter and the screen will be streaming to the display, it’s easy for other users to switch by click. You can buy an additional transmitter or receiver if needed.
Never have to worry about the software configuration, no compatibility, WIFI and network set up, no need IT support, with our powerful and simple solution, everyone can immediately know how to use it for collaborative presentations, which significantly improves corporate efficiency and productivity.

Product features

Features

|

Description

---|---
Plug and olds| Simply connect the transmitter with the PC HDMI ports, then click the button to start the streaming.
App Free| SmartShare mini doesn’t need any software or app installation, no setup, no IT team.
All in one| Support iOS/Android/Windows system, support Blu-ray DVD player, media player, and any devices with HDMI jack.
Wireless Camera| Share the images and audio from the smartphone camera or to the large display simultaneously.
Multi-user mode| Up to 30 user’s presentations at one time
Auto Channel Selection| The SmartShare mini will select the best Wi-Fi channel automatically after powering on to ensure streaming smoothly.
Fast Speed with SC AC
MIMO Technology| The SmartShare mini comes with the fast 802.1 lac MIMO technology which increases Wi-Fi speeds by allowing a pair of wireless devices to simultaneously send or receive multiple data streams.
108000 High Video Quality| SmartShare mini supports real 1080p60 decode, which means much more clear pictures, rich in details and texture compared with 720p.
High-Security Protection| No worries about the data security, the SmartShare mini supports AES 128-bit security encryption and WPA2/WPA-PSK/WPA2-PSK authentication protocol to protect data. HDCP is supported to protect the content.

Package Included:

Devices Requirement
Please ensure the devices meet the following requirements:

• iOS 9.0 or above
• Android 5.0 or above

Product Specification

Video input
Video decode and output| Up to 1080P60
Audio| Stereo, quality 16bits 48KHz
Wireless Channel| IEEE 802.1 lac, 5GHz, 2T2R
Latency| About 120ms latency
Streaming Protocol| Airplay, Miracast, DLNA
HDMI Version| HDMI 1.4 with HDCP1.3
Authentication Protocol| WPA2 (WPAS-PSK / WPA2-Enterprise)
Security| AES 128 bit
Platform supported| Windows, iOS, Android system, Any devices with HDMI jack
Distance| About 50 meters in the clean line of sight
Transmit| HDMI in jack x 1, micro USB x 1, button x 1
interface
LED| Red and blue
Switch button| x 1
Power supply| DC5V/0.5A
Power Consumption| About 2.5W
Dimension| 83x32x13mm
Weight| 27.1g
Receiver|
Interface| HDMI out jack x 1, micro USB x 1, button x 1
LED| Red and Blue
---|---
Power supply| DC5V/0.5A
Power Consumption| About 2.5W
Dimension| 83x32x13mm
Weight| 27.1g
Temperature Range
Operating:| 0°C to +40°C (+32°F to +104°F)
Storage:| -10°C to +60°C (+14°F to +140°F)
Humidity|
Operating:| 10% to 80% relative humidity
Storage:| 5% to 90% relative humidity

Overview

1. HDMI in: connect source devices, like computers or other devices with HDMI, the HDMI in also support 5V power in if the source devices HDMI with 5V output.
2. Button: click to cast or click to switch to another user
3. LED: to display different statues.
4. Micro USB: for power supply.
   Remark: if the source devices HDMI with 5V power output, then no need to connect the USB cable for power. LED indicator of the SmartShare mini TX| Description
   ---|---
   Static red| TX system is booting on
   Flashing red| TX is searching for RX
   Flashing blue| Waiting for connection
   Static blue| Connected and start presenting
   Purple| No HDMI in

SmartShare mini RX

5. HDMI out: connect with monitor or projector
6. Button: switch to a different mode, TX/airplay/dlna mode or miracast mode.
7. LED: to display different statues.
8. Micro USB: for power supply.

Receiver Installation
1. Connect with TV or projector.

1. Connect the RX HDMI with the big screen TV or projector’s HDMI jack.
2. Connect the USB port of RX to the USB port of the TV through a USB cable for the power supply.
   2）Mode selection:
   The received support two modes as below, press the RX button to switch to a different model, the
   the mode will show in the middle of the RX screen.
   1）TX/Airplay/Dlna mode: for TX/iOS devices, or the devices support dlna function.

2）Miracast mode: for android phones which supports miracast mode.

3) Connect to the internet:

• Connect the RX SSID with your smart devices, the SSID and password are shown on the left upper corner of the screen.

• Open the browser with your phone, and input the IP address which shows on the right upper corner of the screen to enter the RX management platform.
  Remark: when connect to the router, the IP address will be updated accordingly.

• Select the network and connect to the management platform, the RX will link to the network and show the network SSID in the middle of the screen. (to get better  performance, we recommend connecting with a 5G router)

• Select the network and connect to the management platform, the RX will link to the network and show the network SSID in the middle of the screen. (to get better  performance, we recommend connecting with a 5G router)

4） AP password management:
Users can change AP passwords on the management page.
Remark: if the password is changed, the TX and RX have to pair again.

5 ) Language
Users can change the language on the management page:
6) Screen Position
If the RX HDMI OUT size is not compatible with the display, the user can use Screen Position to adjust the zoom in and zoom out the screen.

7）Airplay mode: you can select to use streaming mode or Mira mode.
Stream from TX:
SmartShare mini TX Installation

1. Connect the SmartShare mini TX’s HDMI to the PC HDMI port.
   Remark: if the source devices HDMI with 5V power output, then no need to connect the USB cable for power, if not, please connect the TX with PC by USB cable for power.

2. The LED indicator of the SmartShare mini TX will turn red when it’s booting up.

3. The LED indicator will become blue and flashing when SmartShare mini is ready to stream.

4. Click the button to start casting, the LED indicator will become constant blue.

Streaming from smart devices:

1. iOS devices
Step 1: please make sure the RX is in TX/airplay/dlna mode:

Stpe2:

• Search RX SSID and connect. (SSID: RXxxxxx, Password: 12345678), the SSID is shown on the left upper corner of the screen.
• Or if the RX already connects with your network, make sure your device is in the same network as RX.
  Step 3: Stream the content from your iOS devices via Airplay.

2. Android devices
Step 1: switch the RX to miracast mode:

Step 2: make sure your android device’s Wi-Fi is available, select the miracast function of your phone and start to stream.

Remark: there are the different names on different brand phones or tablets: WIFI Display, WLAN Display, Wireless Display, Allshare Display, Allshare Cast, Wireless Display

FCC STATEMENT :
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
This device may not cause harmful interference, and
This device must accept any interference received, including interference that may cause undesired operation.
Warning: Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the  user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
FCC Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20cm between the radiator & your body.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>