Tevii Technology G230 Wireless HDMI Extender User Guide
- June 5, 2024
- Tevii Technology
Table of Contents
G230 Wireless
HDMI Extender
Quick Start Guide
Product & Accessories
How to install 1 Transmitter (TX) to 1 Receiver (RX)
Step 1: Power on the TX & RX by connecting to the power adapter
Step 2: Connect the video source to TX HDMI In
Step 3: Connect RX HDMI out to TV/Monitor/Protector
How to install 1 TX to 4 RX
Step 1: Power on the -IX & all RX by connecting to the power adapter
Step 2: Connect the video source to DC HDMI In, and connect HDMI out to
TV/Monitor.
Step 3: Connect all RXs HDMI out to TV/Monitor.
How to control video source with remote control from RX side
Step 1: Connect the IR receiver to the RX
Step 2: Connect the IR emitter to TX
Step 3: Point the remote control to the IR receiver to back control the
video source
How to control video source with a (wireless) mouse/keyboard from RX side
Step 1: Connect PC to TX with USB & HDMI cables
Step 2: Connect RX USB jack with mouse/keyboard or USB nano receiver for
wireless mouse/keyboard
Step 3: Use the mouse/keyboard to control the PC connected to the Transmitter
LED Indicators
How to pair extra RX
Step 1: Plug In the power adapters of both TX & RX
Step 2: Use HDMI cable to connect HDMI IN on TX & HDMI OUT on RX
Step 3: When the blinking green light turns to be static, it means
pairing successfully.
Key Features
- Long-distance HDMI video and audio signal transmitting wirelessly, up to 200m
- Supporting one-to-many multicast, up to 4 receivers simutaneoulsy
- Supporting Remote control & USB KVM back control
- Compatible with HDMI 1.4, 1.3, and HDCP 1.4
- Plug & Play, Hassle-free, No App or driver installation needed
Technical Specification
Video| Supported protocol
Maximum resolution
Ports| HDMI 1.4 (HDCP 1.4)
920X1080@60 Hz
HDMI -A Ports
---|---|---
IR| Ports| 3.5mm
WIFI| Protocol
Transmission distance| 802.11 b/g/n/ac
Up to 200m (clear line of sight)
Other| Power Supply
Max power consumption
Temperature
Humidity
Size| DC 12V/1A
Max. 7W
0°C +45°C
10% 80% RH
90*92.33mm
FCC Warning Statement Changes or modifications not expressly approved by the
party responsible for compliance could void the user’s authority to operate
the equipment. This equipment has been tested and found to comply with the
limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
— Reorient or relocate the receiving antenna.
— Increase the separation between the equipment and receiver.
–Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
— Consult the dealer or an experienced radio/TV technician for help. This
device complies with part 15 of the FCC Rules.
Operation is subject to the following two conditions: (1) This device may not
cause harmful interference, and (2) this device must accept any interference
received, including interference that may cause undesired operation.
RF Exposure Statement
To maintain compliance with FCC’s RF exposure guidelines, This equipment
should be installed and operated at a minimum distance of 20cm from the
radiator of your body. This device and its antenna(s) must not be co-located
or operated in conjunction with any other antenna or transmitter.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>